ONSEMI 7SB385BMX1TCG

7SB385
Bus Switch
The 7SB385 Bus Switch is an advanced high−speed line switch in
ultra−small footprint.
Features
•
•
•
•
•
High Speed: tPD = 0.25 ns (Max) @ VCC = 4.5 V
3 W Switch Connection Between 2 Ports
Power Down Protection Provided on Inputs
Ultra−Small Packages
These are Pb−Free Devices
A
http://onsemi.com
MARKING
DIAGRAMS
5
5
1
B
SOT−353/SC70−5/SC−88A
DF SUFFIX
CASE 419A
OE
AF MG
G
1
Figure 1. Logic Diagram
1
A
B
2
GND
3
5
4
VCC
OE
1
6
VCC
B
2
5
NC
GND
3
4
OE
Figure 3. ULLGA6/UDFN6
(Top View)
SOT23−5/TSOP−5/SC59−5
DT SUFFIX
CASE 483
ULLGA6
1.0 x 1.0
CASE 613AD
1
Input OE
Function
L
Disconnect
H
B=A
1
1
ULLGA6
1.2 x 1.0
CASE 613AE
ULLGA6
1.45 x 1.0
CASE 613AF
G
M
M
G
G
F
UDFN6
1.2 x 1.0
CASE 517AA
1
V
Function Table
AF MG
G
1
4
Figure 2. TSOP−5/SC−88A
(Top View)
A
5
J
5
G
M
M
1
AF, 4, V, J, F = Specific Device Code
M = Date Code
G
= Pb−Free Package
(Note: Microdot may be in either location)
ORDERING INFORMATION
See detailed ordering and shipping information in the package
dimensions section on page 4 of this data sheet.
© Semiconductor Components Industries, LLC, 2011
March, 2011 − Rev. 2
1
Publication Order Number:
7SB385/D
7SB385
Table 1. MAXIMUM RATINGS
Symbol
Parameter
Value
Unit
VCC
DC Supply Voltage
−0.5 to +7.0
V
VIN
Control Pin Input Voltage
−0.5 to +7.0
V
VI/O
Switch Input / Output Voltage
−0.5 to +7.0
V
IIK
Control Pin DC Input Diode Current
VIN < GND
−50
mA
IOK
Switch I/O Port DC Diode Current
VI/O < GND
−50
mA
IO
On−State Switch Current
±128
mA
Continuous Current Through VCC or GND
±150
mA
ICC
DC Supply Current per Supply Pin
±150
mA
IGND
DC Ground Current per Ground Pin
±150
mA
TSTG
Storage Temperature Range
−65 to +150
°C
TL
Lead Temperature, 1 mm from Case for 10 Seconds
260
°C
TJ
Junction Temperature Under Bias
150
°C
qJA
Thermal Resistance
SC70−5/SC−88A (Note 1)
TSOP−5
ULLGA6/UDFN6
350
230
496
°C/W
PD
Power Dissipation in Still Air at 85°C
SC70−5/SC−88A (Note 1)
TSOP−5
ULLGA6/UDFN6
150
200
252
mW
MSL
Moisture Sensitivity
FR
Flammability Rating
VESD
ILATCHUP
Level 1
Oxygen Index: 28 to 34
ESD Withstand Voltage
UL 94 V−0 @ 0.125 in
Human Body Mode (Note 2)
Machine Mode (Note 3)
Charged Device Mode (Note 4)
Latchup Performance Above VCC and Below GND at 85°C (Note 5)
>2000
>200
N/A
V
±100
mA
Stresses exceeding Maximum Ratings may damage the device. Maximum Ratings are stress ratings only. Functional operation above the
Recommended Operating Conditions is not implied. Extended exposure to stresses above the Recommended Operating Conditions may affect
device reliability.
1. Measured with minimum pad spacing on an FR4 board, using 10 mm−by−1 inch, 2 ounce copper trace no air flow.
2. Tested to EIA/ JESD22−A114−A
3. Tested to EIA/ JESD22−A115−A
4. Tested to JESD22−C101−A
5. Tested to EIA / JESD78.
Table 2. RECOMMENDED OPERATING CONDITIONS
Symbol
VCC
VI
VI/O
Parameter
Min
Max
Unit
4.0
5.5
V
Control Pin Input Voltage
0
5.5
V
Switch Input / Output Voltage
0
5.5
V
−55
+125
°C
0
0
5
DC
nS/V
Positive DC Supply Voltage
TA
Operating Free−Air Temperature
Dt / DV
Input Transition Rise or Fall Rate
Control Input
Switch I/O
http://onsemi.com
2
7SB385
Table 3. DC ELECTRICAL CHARACTERISTICS
TA = 255C
Symbol
Parameter
Conditions
VCC (V)
IIN = −18 mA
4.5
Min
Typ
TA = −555C to +1255C
Max
Min
−1.2
Max
Unit
−1.2
V
VIK
Clamp Diode Voltage
VIH
High−Level Input Voltage
(Control)
4.0 to 5.5
VIL
Low−Level Input Voltage
(Control)
4.0 to 5.5
0.8
0.8
V
IIN
Input Leakage Current
0 ≤ VIN ≤ 5.5 V
5.5
±0.1
±1.0
mA
IOFF
Power Off Leakage Current
VI/O = 0 to 5.5 V
0
±0.1
±1.0
mA
ICC
Quiescent Supply Current
IO = 0, VIN =
VCC or 0 V
5.5
±0.1
±1.0
mA
DICC
Increase in Supply Current
(Control Pin)
One input at 3.4
V; Other inputs
at VCC or GND
5.5
2.5
mA
RON
Switch ON Resistance
VI/O = 0,
II/O = 64 mA
II/O = 30 mA
4.5
VI/O = 2.4,
II/O = 15 mA
4.5
VI/O = 2.4,
II/O = 15 mA
4.0
2.0
2.0
V
W
3
3
7
7
7
7
6
15
15
10
20
20
Table 4. AC ELECTRICAL CHARACTERISTICS
TA = −555C
to +1255C
TA = 255C
Symbol
Parameter
VCC (V)
Test Condition
See Figure 3
Min
Typ
Max
Min
Max
Unit
0.25
ns
tPD
Propagation Delay,
A to B or B to A
4.0 to 5.5
tEN
Output Enable Time
4.5 to 5.5
0.8
2.5
4.2
0.8
4.2
4.0
0.8
3.0
4.6
0.8
4.6
4.5 to 5.5
0.8
3.1
4.8
0.8
4.8
4.0
0.8
2.9
4.4
0.8
4.4
tDIS
CIN
Output Disable Time
0.25
0.25
Control Input Capacitance
5.0
CIO(ON)
Switch On Capacitance
5.0
CIO(OFF)
Switch Off Capacitance
5.0
VIN = 3 V or 0
0.25
ns
ns
2.0
pF
Switch ON
10
pF
Switch OFF
3.5
pF
http://onsemi.com
3
7SB385
AC Loading and Waveforms
TEST
S1
tPD
tPLZ/tPZL
tPHZ/tPZH
Open
7V
GND
7V
500 W
From Output
Under Test
CL = 50 pF
(see Note A)
S1
Open
GND
500 W
Output
Waveform 1
S1 at 7 V
(see Note B)
3V
Input
1.5 V
1.5 V
0V
tPHL
tPLH
Output
Waveform 2
S1 at Open
(see Note B)
VOH
1.5 V
1.5 V
Output
3V
Output
Control
LOAD CIRCUIT
VOL
VOLTAGE WAVEFORMS
PROPAGATION DELAY TIMES
1.5 V
1.5 V
0V
tPZL
tPLZ
1.5 V
3.5 V
VOL + 0.3 V
tPZH
VOL
tPHZ
1.5 V
VOH − 0.3 V
VOH
0V
VOLTAGE WAVEFORMS
ENABLE AND DISABLE TIMES
A. CL includes probe and jig capacitance.
B. Waveform 1 is for an output with internal conditions such that the output is low, except when disabled by the output control.
Waveform 2 is for an output with internal conditions such that the output is high, except when disabled by the output control.
C. All input pulses are supplied by generators having the following characteristics: PRR ≤ 10 MHz, ZO = 50 W, tr ≤ 2.5 ns, tf ≤ 2.5 ns.
D. The output is measured with one input transition per measurement.
E. tPLZ and tPHZ are the same as tdis.
F. tPZL and tPZH are the same as ten.
G. tPLH and tPHL are the same as tpd.
Figure 4. Load Circuit and Voltage Waveforms
DEVICE ORDERING INFORMATION
Package
Shipping†
7SB385DTT1G
TSOP−5
(Pb−Free)
3000 / Tape & Reel
7SB385DFT2G
SC−88A
(Pb−Free)
3000 / Tape & Reel
7SB385AMX1TCG
ULLGA6 − 0.5 mm Pitch
(Pb−Free)
3000 / Tape & Reel
7SB385BMX1TCG
ULLGA6 − 0.4 mm Pitch
(Pb−Free)
3000 / Tape & Reel
7SB385CMX1TCG
ULLGA6 − 0.35 mm Pitch
(Pb−Free)
3000 / Tape & Reel
UDFN6 − 0.4 mm Pitch
(Pb−Free)
3000 / Tape & Reel
Device
7SB385MUTCG
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
http://onsemi.com
4
7SB385
PACKAGE DIMENSIONS
SC−88A, SOT−353, SC−70
CASE 419A−02
ISSUE J
A
G
5
4
−B−
S
1
2
DIM
A
B
C
D
G
H
J
K
N
S
3
D 5 PL
0.2 (0.008)
M
B
M
N
J
C
H
NOTES:
1. DIMENSIONING AND TOLERANCING
PER ANSI Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. 419A−01 OBSOLETE. NEW STANDARD
419A−02.
4. DIMENSIONS A AND B DO NOT INCLUDE
MOLD FLASH, PROTRUSIONS, OR GATE
BURRS.
K
http://onsemi.com
5
INCHES
MIN
MAX
0.071
0.087
0.045
0.053
0.031
0.043
0.004
0.012
0.026 BSC
--0.004
0.004
0.010
0.004
0.012
0.008 REF
0.079
0.087
MILLIMETERS
MIN
MAX
1.80
2.20
1.15
1.35
0.80
1.10
0.10
0.30
0.65 BSC
--0.10
0.10
0.25
0.10
0.30
0.20 REF
2.00
2.20
7SB385
PACKAGE DIMENSIONS
TSOP−5
CASE 483−02
ISSUE H
D
NOTE 5
2X
0.10 T
2X
0.20 T
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. MAXIMUM LEAD THICKNESS INCLUDES
LEAD FINISH THICKNESS. MINIMUM LEAD
THICKNESS IS THE MINIMUM THICKNESS
OF BASE MATERIAL.
4. DIMENSIONS A AND B DO NOT INCLUDE
MOLD FLASH, PROTRUSIONS, OR GATE
BURRS.
5. OPTIONAL CONSTRUCTION: AN
ADDITIONAL TRIMMED LEAD IS ALLOWED
IN THIS LOCATION. TRIMMED LEAD NOT TO
EXTEND MORE THAN 0.2 FROM BODY.
5X
0.20 C A B
M
5
1
4
2
L
3
B
S
K
DETAIL Z
G
A
DIM
A
B
C
D
G
H
J
K
L
M
S
DETAIL Z
J
C
0.05
SEATING
PLANE
H
T
MILLIMETERS
MIN
MAX
3.00 BSC
1.50 BSC
0.90
1.10
0.25
0.50
0.95 BSC
0.01
0.10
0.10
0.26
0.20
0.60
1.25
1.55
0_
10 _
2.50
3.00
SOLDERING FOOTPRINT*
0.95
0.037
1.9
0.074
2.4
0.094
1.0
0.039
0.7
0.028
SCALE 10:1
mm Ǔ
ǒinches
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
http://onsemi.com
6
7SB385
PACKAGE DIMENSIONS
UDFN6 1.2x1.0, 0.4P
CASE 517AA−01
ISSUE C
EDGE OF PACKAGE
PIN ONE
REFERENCE
2X
0.10 C
L1
ÉÉÉ
ÉÉÉ
E
DETAIL A
Bottom View
(Optional)
TOP VIEW
2X
(A3)
0.10 C
A1
A
0.08 C
A3
DETAIL B
Side View
(Optional)
5X
MILLIMETERS
MIN
MAX
0.45
0.55
0.00
0.05
0.127 REF
0.15
0.25
1.20 BSC
1.00 BSC
0.40 BSC
0.30
0.40
0.00
0.15
0.40
0.50
MOUNTING FOOTPRINT*
6X
6X
0.42
C
A1
DIM
A
A1
A3
b
D
E
e
L
L1
L2
MOLD CMPD
SEATING
PLANE
SIDE VIEW
1
ÉÉÉ
ÉÉÉ
EXPOSED Cu
0.10 C
10X
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. DIMENSION b APPLIES TO PLATED TERMINAL
AND IS MEASURED BETWEEN 0.25 AND
0.30 mm FROM TERMINAL.
4. COPLANARITY APPLIES TO THE EXPOSED
PAD AS WELL AS THE TERMINALS.
A
B
D
0.22
L
3
L2
6X
b
0.10 C A B
0.05 C
6
0.40
PITCH
4
e
NOTE 3
1.07
DIMENSIONS: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
BOTTOM VIEW
http://onsemi.com
7
7SB385
PACKAGE DIMENSIONS
A
B
D
PIN ONE
REFERENCE
0.10 C
ÉÉ
ÉÉ
0.10 C
ULLGA6 1.0x1.0, 0.35P
CASE 613AD−01
ISSUE A
E
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. DIMENSION b APPLIES TO PLATED TERMINAL
AND IS MEASURED BETWEEN 0.15 AND
0.30 mm FROM THE TERMINAL TIP.
4. A MAXIMUM OF 0.05 PULL BACK OF THE
PLATED TERMINAL FROM THE EDGE OF THE
PACKAGE IS ALLOWED.
DIM
A
A1
b
D
E
e
L
L1
TOP VIEW
0.05 C
A
6X
0.05 C
SEATING
PLANE
SIDE VIEW
MOUNTING FOOTPRINT
SOLDERMASK DEFINED*
C
A1
MILLIMETERS
MIN
MAX
−−−
0.40
0.00
0.05
0.12
0.22
1.00 BSC
1.00 BSC
0.35 BSC
0.25
0.35
0.30
0.40
5X
0.48
e
5X
L
NOTE 4
3
1
1.18
L1
0.53
6
4
6X
1
PKG
OUTLINE
b
0.05 C
0.35
PITCH
DIMENSIONS: MILLIMETERS
0.10 C A B
BOTTOM VIEW
6X
0.22
NOTE 3
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
http://onsemi.com
8
7SB385
PACKAGE DIMENSIONS
ULLGA6 1.2x1.0, 0.4P
CASE 613AE−01
ISSUE A
PIN ONE
REFERENCE
0.10 C
ÉÉ
ÉÉ
ÉÉ
0.10 C
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. DIMENSION b APPLIES TO PLATED TERMINAL
AND IS MEASURED BETWEEN 0.15 AND
0.30 mm FROM THE TERMINAL TIP.
4. A MAXIMUM OF 0.05 PULL BACK OF THE
PLATED TERMINAL FROM THE EDGE OF THE
PACKAGE IS ALLOWED.
A
B
D
E
DIM
A
A1
b
D
E
e
L
L1
TOP VIEW
0.05 C
A
6X
0.05 C
SEATING
PLANE
SIDE VIEW
MOUNTING FOOTPRINT
SOLDERMASK DEFINED*
C
A1
MILLIMETERS
MIN
MAX
−−−
0.40
0.00
0.05
0.15
0.25
1.20 BSC
1.00 BSC
0.40 BSC
0.25
0.35
0.35
0.45
5X
0.49
e
5X
L
NOTE 4
3
1
1.24
L1
0.53
6
4
6X
b
0.05 C
1
PKG
OUTLINE
0.40
PITCH
DIMENSIONS: MILLIMETERS
0.10 C A B
BOTTOM VIEW
6X
0.26
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
NOTE 3
http://onsemi.com
9
7SB385
PACKAGE DIMENSIONS
ULLGA6 1.45x1.0, 0.5P
CASE 613AF−01
ISSUE A
PIN ONE
REFERENCE
0.10 C
NOTES:
1. DIMENSIONING AND TOLERANCING PER
ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. DIMENSION b APPLIES TO PLATED TERMINAL
AND IS MEASURED BETWEEN 0.15 AND
0.30 mm FROM THE TERMINAL TIP.
4. A MAXIMUM OF 0.05 PULL BACK OF THE
PLATED TERMINAL FROM THE EDGE OF THE
PACKAGE IS ALLOWED.
A
B
D
ÉÉÉ
ÉÉÉ
ÉÉÉ
E
DIM
A
A1
b
D
E
e
L
L1
TOP VIEW
0.10 C
0.05 C
A
6X
0.05 C
MOUNTING FOOTPRINT
SOLDERMASK DEFINED*
SEATING
PLANE
SIDE VIEW
5X
C
A1
e
5X
L
MILLIMETERS
MIN
MAX
−−−
0.40
0.00
0.05
0.15
0.25
1.45 BSC
1.00 BSC
0.50 BSC
0.25
0.35
0.30
0.40
0.49
NOTE 4
3
1
1.24
L1
0.53
6
4
BOTTOM VIEW
6X
0.30
6X
b
0.10 C A B
0.05 C
NOTE 3
1
PKG
OUTLINE
0.50
PITCH
DIMENSIONS: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice
to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability
arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages.
“Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All
operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights
nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications
intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer
purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates,
and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal
Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5773−3850
http://onsemi.com
10
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
7SB385/D