DIODE MODULE DD160KB UL;E76102 （M） Power Diode Module DD160KB Series are designed for various rectifier circuits. DD160KB has two diode chips connected in series and the mounting base is electrically isolated from elements for simple heatsink construction. Wide voltage rating up to, 1600V is available for various input voltages. ● Isolated mounting base ● Two elements in a package for simple (single and three phase) bridge connections ● Highly reliable glass passivated chips ● High surge current capability 93.5max 30max 1 23 23 3-M5 21 16.5 （Applications） ● Various rectifiers, Battery chargers, DC motor drives 2-φ6.5 2 13 26max 80 3 Unit：㎜ ■Maximum Ratings Symbol （Tj＝25℃ unless otherwise specified） Item Ratings DD160KB40 DD160KB80 DD160KB120 DD160KB160 Unit VRRM Repetitive Peak Reverse Voltage 400 800 1200 1600 V VRSM Non-Repetitive Peak Reverse Voltage 480 960 1300 1700 V Symbol Item Ratings Unit IF（AV） Conditions Average Forward Current Single phase, half wave, 180℃ conduction, Tc=90℃ IF（RMS） R.M.S. Forward Current Single phase, half wave, 180℃ conduction, Tc=90℃ IFSM Surge Forward Current 1 ／2cycle, It It Value for one cycle of surge current Tj Operating Junction Temperature 2 2 Tstg Storage Temperature VISO Isolation Breakdown Voltage（R.M.S.） Mounting Torque 60HZ, peak value, non-repetitive A.C. 1minute 160 A 250 A 3200 A 42600 A2S −40 to ＋150 ℃ −40 to ＋125 ℃ 2500 V Mounting（M6） Recommended Value 2.5-3.9（25-40） 4.7（48） Terminal（M5） Recommended Value 1.5-2.5（15-25） 2.7（28） N･m （㎏f･B） 170 g Ratings Unit Mass Typical Value ■Electrical Characteristics Symbol Item IRRM Repetitive Peak Reverse Current, max. Tj＝150℃，VR＝VRRM 30 mA VFM Forward Voltage Drop, max. Forward current 500A, Inst measurement 1.35 V Junction to case 0.30 ℃/W Rth（j-c） Thermal Impedance, max. SanRex Conditions ® 50 Seaview Blvd. Port Washington, NY 11050-4618 PH.(516)625-1313 FAX(516)625-8845 E-mail: [email protected] DD160KB ３５０ Power Dissipation Pav（W） １ ０ ０００ Maximum Forward Characteristics Forward Current（A） ５ ００ ０ ３００ ２ ００ ０ Ｔ ｊ=２５℃ ５０ ０ Per one element Three Phase １５０ １ ００ ２ ０ １ ０ ０． ６ ０． ８ １． ０ １． ２ １． ４ １． ６ １． ８ Per one element １００ Maximum ５ ０ ５０ ０ ０ ２． ０ ５０ １００ １５０ ２００ ２５０ ３００ Forward Voltage Drop（V） Average Forward Current（A） Average Forward Current vs. Allowable Case Temperature Cycle Surge Forward Current Rating （Non-Repetitive） ３５００ Surge Forward Current（A） Allowable Case Temperature Tc（℃） Single Phase ２００ ２０ ０ ３０００ １２０ Per one element ２５００ Per one element Tj＝25℃ start ２０００ ９０ ６０Hz １５００ １０００ ６０ Single Phase Three Phase ３０ ０ ５０ １００ １５０ D.C. ２００ ２５０ ３００ ０． ４ Ｔ ｊ=２５℃ Start ５００ ０ １ ２ ５ １０ ２０ ５０ １００ Time（Cycles） Average Forward Current（A） Transient Thermal Impedance θj-c（℃/W） D.C. ２５０ １０００ １５０ Average Forward Current vs. Power Dissipation Transient Thermal Impedance Junction to Case Per one element ０． ３ ０． ２ ０． １ ０ ０． ００１０． ００ ２ ０． ００ ５０． ０１０． ０２ ０． ０５ ０． １ ０． ２ ２ ５ １０ ２０ ５０ ０． ５ １ ２ Time t（sec） SanRex 50 Seaview Blvd. Port Washington, NY 11050-4618 PH.(516)625-1313 FAX(516)625-8845 E-mail: [email protected]