SEOUL NB104

Pb Free
*Customer:
SPECIFICATION
Preliminary
ITEM
MODEL
Revision Date
CHIP LED DEVICE
SSC-NB104
Std(070426)
[Contents]
1. Features
2. Absolute maximum ratings
3. Electro-optical characteristics
4. Characteristic diagram
5. Soldering profile
6. Outline dimension
7. Packing
8. Reel packing structure
9. Precaution for use
10. Rank Division
Customer
Approved by
Approved by
Approved by
Supplier
Drawn by
SSC-QP-0401-06(REV.0)
Checked by
Approved by
SEOUL SEMICONDUCTOR CO,. LTD.
148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea
TEL: 82-2-3281-6269 FAX: 82-2-858-5537
- 1/9 -
4
Seoul SSC-NB10
Semiconductor
1. Features
Package : 1.6×0.8×0.4 mm
Untinted, Diffused flat mold
Wavelength : 472 nm
2. Absolute Maximum Ratings
(Ta=25℃)
Parameter
Symbol
Value
Unit
Power Dissipation
Pd
64
㎽
Forward Current
IF
20
㎃
Peak Forward Current
IFM*1
50
㎃
Reverse Voltage
VR
5
V
Operating Temperature
Topr
-30 ~ 85
℃
Storage Temperature
Tstg
-40 ~ 100
℃
*1 IFM conditions: Pulse width Tw≤ 0.1ms and Duty ratio≤ 1/10
3. Electro-Optical Characteristics
(Ta=25℃)
Parameter
Symbol
Condition
Min
Typ
Max
Unit
Forward Voltage
VF
IF=5㎃
2.7
3.05
3.2
V
Reverse Current
IR
VR=5V
-
-
10
㎂
Luminous Intensity*2
IV
IF=5㎃
11
35
55
mcd
D
IF=5㎃
460
472
480
㎚
Δλ
IF=5㎃
-
30
-
㎚
2θ
IF=5㎃
-
120
-
˚
Wavelength
Spectral Bandwidth
Viewing angle*3
λ
1/2
*2 The luminous intensity IV is measured at the peak of the spatial pattern which may not be aligned with the mechanical axis of the LED package.
*3 θ
1/2
is the off-axis where the luminous intensity is 1/2 the peak intensity.
[Note] All products confirm to the listed minimum and maximum specifications for electric and optical characteristics, when operated at 5mA within
the maximum ratings shown above. All measurements were made under the standardized environment of SSC.
(Tolerance : Iv ±10 %, λD ±2 nm, VF ±0.1 V)
SSC-QP-0401-06(REV.0)
SEOUL SEMICONDUCTOR CO,. LTD.
148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea
TEL: 82-2-3281-6269 FAX: 82-2-858-5537
- 2/9 -
SSC-NB104
4. Characteristic Diagrams
Forward Current vs Forward Voltage
Luminous Intensity vs Forward Current
400
350
Relative Intensity IV [%]
Forward Current IF(mA)
300
250
10
200
150
100
50
1
2.9
3.0
3.1
3.2
3.3
3.4
0
3.5
5
10
15
20
25
30
Forward Current IF [mA]
Forward Voltage VF(V)
Forward Current Derating Curve
Radiation Diagram
25
Forward current IF(mA)
20
15
10
5
0
-25
0
25
50
75
100
Ambient temperature Ta(℃)
SSC-QP-0401-06(REV.0)
SEOUL SEMICONDUCTOR CO,. LTD.
148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea
TEL: 82-2-3281-6269 FAX: 82-2-858-5537
- 3/9 -
SSC-NB104
5. Soldering Profile
Reflow Soldering Conditions/ Profile
(1) Lead Solder
-Preliminary heating to be at 150℃max. for 2 minutes max.
-Soldering heat to be at 240℃max. for 5 seconds max.
LED Surface temperature
°C
Operation heating
240
150
Pre-heating
Temperature
rise: 5°C/sec.
Cooling:
-5°C/sec.
~
120
0
60 to 120 sec.
5sec. max
(2) Lead-Free Solder
-Preliminary heating to be at 150℃max. for 2 minutes max.
-Soldering heat to be at 260℃max. for 10 seconds max.
LED Surface temperature
°C
Operation heating
260
150
Pre-heating
Temperature
rise: 5°C/sec.
Cooling:
-5°C/sec.
~
120
0
60 to 120 sec.
10 sec.
(3) Hand Soldering conditions
-Not more than 3 seconds @MAX280℃, under Soldering iron.
[Note] In case the soldered products are reused in soldering process, we don’t guarantee the products.
SSC-QP-0401-06(REV.0)
SEOUL SEMICONDUCTOR CO,. LTD.
148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea
TEL: 82-2-3281-6269 FAX: 82-2-858-5537
- 4/9 -
SSC-NB104
6. Outline Dimension
Tolerance: ±0.1,
0.3
0.12
Polarity Mark
0.8
1.1
1.2
2.4
Cathode
Resin
1.6
Unit: ㎜
PCB
0.4 ±0.05
Anode
0.3
0.8
0.8
[Recommended Solder Pattern]
7. Packing
±0.1
±0.05
8.0
±0.2
±0.05
0.95
±0.05
1.85
0.5 ±0.08
4.0 ±0.1
±0.05
0.2
1.75
2.0 ±0.05
3.5
1.5
±0.1
0.5
(2.75)
4.0
+0.1
-0
±0.05
11.4
180 +0
-3
9
±0.3
60
+0.2
-0
2 ±0.2
22
13
±0.2
Label
Tolerance: ±0.2,
Unit: ㎜
(1) Quantity : 4,000pcs/Reel
(2) Cumulative Tolerance : Cumulative Tolerance/10 pitches to be ±0.2mm
(3) Adhesion Strength of Cover Tape : Adhesion strength to be 0.1-0.7N when the cover tape is turned off
from the carrier tape at 10˚ angle to be the carrier tape.
(4) Package : P/N, Manufacturing data Code No. and quantity to be indicated on a damp proof Package.
SSC-QP-0401-06(REV.0)
SEOUL SEMICONDUCTOR CO,. LTD.
148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea
TEL: 82-2-3281-6269 FAX: 82-2-858-5537
- 5/9 -
SSC-NB104
8. Reel Packing Structure
Reel
#
#
#
#
#
#
#
#
#
#
:
N
/
P
###
제품명 SSC-NB104-70
#
#
#
#
#
#
#
#
#
o
N
t
o
L
수량 :4000
Aluminum Vinyl Bag
#
#
#
#
#
#
#
#
#
#
:
N
/
P
###
제품명 SSC-NB104-70
#
#
#
#
#
#
#
#
#
o
N
t
o
L
수량 : 4000
Outer Box
*Material: Paper(SW3B(B))
SIZE(mm)
TYPE
a
7inch 245
b
220
c
142
c
CHIP LED
PART : SSC-NB104-70
CODE :
Q'YT : 40,000EA
CHIP LED
b
a
LOT NO :
DATE :
SEOUL SEMICONDUCTOR CO.,LTD
SSC-QP-0401-06(REV.0)
SEOUL SEMICONDUCTOR CO,. LTD.
148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea
TEL: 82-2-3281-6269 FAX: 82-2-858-5537
- 6/9 -
SSC-NB104
9. Precaution for use
(1) Storage
In order to avoid the absorption of moisture, it is recommended to store in the dry box (or desiccator)
with a desiccant. Otherwise, to store them in the following environment is recommended.
Temperature : 5℃~30℃
Humidity : 60%HR max.
(2) Attention after opened
However LED is corresponded SMD, when LED be soldered dip, interfacial separation may affect the
light transmission efficiency, causing the light intensity to drop. Attention in followed.
a. After opened and mounted, the soldering shall be quickly.
b. Keeping of a fraction
Temperature : 5 ~ 40℃
Humidity : less than 30%
(3) In case of more than 1 week passed after opening or change color of indicator on desiccant
components shall be dried 10-12hr. at 60±5℃.
(4) In case of supposed the components is humid, shall be dried dip-solder just before.
100Hr at 80±5℃ or 12Hr at 100±5℃.
(5) Any mechanical force or any excess vibration shall not be accepted to apply during cooling process to
normal temp. after soldering.
(6) Quick cooling shall not be avoid.
(7) Components shall not be mounted on warped direction of PCB.
(8) Anti radioactive ray design is not considered for the products listed here in.
(9) Gallium arsenide is used in some of the products listed in this publication. These products are
dangerous if they are burned or smashed in the process of disposal. It is also dangerous to drink the
liquid or inhale the gas generated by such products when chemically disposed.
(10) This device should not be used in any type of fluid such as water, oil, organic solvent and etc. When
washing is required, IPA should be used.
(11) When the LEDs are illuminating, operating current should be decided after considering the ambient
maximum temperature.
(12) LEDs must be stored to maintain a clean atmosphere. If the LEDs are stored for 3 months or more
after being shipped from SSC, a sealed container with a nitrogen atmosphere should be used for storage.
(13) The LEDs must be soldered within seven days after opening the moisture-proof packing.
(14) Repack unused products with anti-moisture packing, fold to close any opening and then store in a dry
place.
(15) The appearance and specifications of the product may be modified for improvement without notice.
SSC-QP-0401-06(REV.0)
SEOUL SEMICONDUCTOR CO,. LTD.
148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea
TEL: 82-2-3281-6269 FAX: 82-2-858-5537
- 7/9 -
SSC-NB104
10 . Rank Division
NB104-60
NB104-65
NB104-70
SSC-QP-0401-06(REV.0)
VF[V]
IV[mcd]
λD[nm]
BIN
at IF=5[mA]
2.70~2.80(A)
2.80~2.90(B)
2.90~3.00(C)
3.00~3.10(D)
3.10~3.20(E)
2.70~2.80(A)
2.80~2.90(B)
2.90~3.00(C)
3.00~3.10(D)
3.10~3.20(E)
2.70~2.80(A)
2.80~2.90(B)
2.90~3.00(C)
3.00~3.10(D)
3.10~3.20(E)
at IF=5[mA]
11~23(A)
11~23(A)
11~23(A)
11~23(A)
11~23(A)
23~38(B)
23~38(B)
23~38(B)
23~38(B)
23~38(B)
38~55(C)
38~55(C)
38~55(C)
38~55(C)
38~55(C)
at IF=5[mA]
460.0~465.0(A)
460.0~465.0(A)
460.0~465.0(A)
460.0~465.0(A)
460.0~465.0(A)
460.0~465.0(A)
460.0~465.0(A)
460.0~465.0(A)
460.0~465.0(A)
460.0~465.0(A)
460.0~465.0(A)
460.0~465.0(A)
460.0~465.0(A)
460.0~465.0(A)
460.0~465.0(A)
AAA
BAA
CAA
DAA
EAA
ABA
BBA
CBA
DBA
EBA
ACA
BCA
CCA
DCA
ECA
2.70~2.80(A)
2.80~2.90(B)
2.90~3.00(C)
3.00~3.10(D)
3.10~3.20(E)
2.70~2.80(A)
2.80~2.90(B)
2.90~3.00(C)
3.00~3.10(D)
3.10~3.20(E)
2.70~2.80(A)
2.80~2.90(B)
2.90~3.00(C)
3.00~3.10(D)
3.10~3.20(E)
11~23(A)
11~23(A)
11~23(A)
11~23(A)
11~23(A)
23~38(B)
23~38(B)
23~38(B)
23~38(B)
23~38(B)
38~55(C)
38~55(C)
38~55(C)
38~55(C)
38~55(C)
465.0~470.0(B)
465.0~470.0(B)
465.0~470.0(B)
465.0~470.0(B)
465.0~470.0(B)
465.0~470.0(B)
465.0~470.0(B)
465.0~470.0(B)
465.0~470.0(B)
465.0~470.0(B)
465.0~470.0(B)
465.0~470.0(B)
465.0~470.0(B)
465.0~470.0(B)
465.0~470.0(B)
AAB
BAB
CAB
DAB
EAB
ABB
BBB
CBB
DBB
EBB
ACB
BCB
CCB
DCB
ECB
2.70~2.80(A)
2.80~2.90(B)
2.90~3.00(C)
3.00~3.10(D)
3.10~3.20(E)
2.70~2.80(A)
2.80~2.90(B)
2.90~3.00(C)
3.00~3.10(D)
11~23(A)
11~23(A)
11~23(A)
11~23(A)
11~23(A)
23~38(B)
23~38(B)
23~38(B)
23~38(B)
470.0~475.0(C)
470.0~475.0(C)
470.0~475.0(C)
470.0~475.0(C)
470.0~475.0(C)
470.0~475.0(C)
470.0~475.0(C)
470.0~475.0(C)
470.0~475.0(C)
AAC
BAC
CAC
DAC
EAC
ABC
BBC
CBC
DBC
SEOUL SEMICONDUCTOR CO,. LTD.
148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea
TEL: 82-2-3281-6269 FAX: 82-2-858-5537
- 8/9 -
SSC-NB104
NB104-75
SSC-QP-0401-06(REV.0)
3.10~3.20(E)
2.70~2.80(A)
2.80~2.90(B)
2.90~3.00(C)
3.00~3.10(D)
3.10~3.20(E)
23~38(B)
38~55(C)
38~55(C)
38~55(C)
38~55(C)
38~55(C)
470.0~475.0(C)
470.0~475.0(C)
470.0~475.0(C)
470.0~475.0(C)
470.0~475.0(C)
470.0~475.0(C)
EBC
ACC
BCC
CCC
DCC
ECC
2.70~2.80(A)
2.80~2.90(B)
2.90~3.00(C)
3.00~3.10(D)
3.10~3.20(E)
2.70~2.80(A)
2.80~2.90(B)
2.90~3.00(C)
3.00~3.10(D)
3.10~3.20(E)
2.70~2.80(A)
2.80~2.90(B)
2.90~3.00(C)
3.00~3.10(D)
3.10~3.20(E)
11~23(A)
11~23(A)
11~23(A)
11~23(A)
11~23(A)
23~38(B)
23~38(B)
23~38(B)
23~38(B)
23~38(B)
38~55(C)
38~55(C)
38~55(C)
38~55(C)
38~55(C)
475.0~480.0(D)
475.0~480.0(D)
475.0~480.0(D)
475.0~480.0(D)
475.0~480.0(D)
475.0~480.0(D)
475.0~480.0(D)
475.0~480.0(D)
475.0~480.0(D)
475.0~480.0(D)
475.0~480.0(D)
475.0~480.0(D)
475.0~480.0(D)
475.0~480.0(D)
475.0~480.0(D)
AAD
BAD
CAD
DAD
EAD
ABD
BBD
CBD
DBD
EBD
ACD
BCD
CCD
DCD
ECD
SEOUL SEMICONDUCTOR CO,. LTD.
148-29 Kasan-Dong, Keumchun-Gu, Seoul, Korea
TEL: 82-2-3281-6269 FAX: 82-2-858-5537
- 9/9 -
SSC-NB104