FEATURES PROFESSIONAL LED INDICATORS Ø13mm Mounting 528 SERIES PACK QUANTITY = 10 PIECES l Robust stainless steel housing l Low profile styling, sunlight readable LEDs l Sealed to IP67 l Flying lead terminations available l Suitable for high vibration applications l Internal reverse protection diode fitted as standard in all voltage models. SPECIFICATION Ordering Information & Typical Technical Characteristics (Ta = 25°C) Mean Time Between Failure = 100,000 Hours. PART NUMBER COLOUR Luminous intensity figures refer to the unmodified discrete LED. LENS VOLTAGE DC (Vdc) Vopr CURRENT DC (mA) lopr LUMINOUS INTENSITY lv@20mA (mcd) WAVE OPERATING STORAGE LENGTH TEMP TEMP λp (nm) Topr Tstg HIGH INTENSITY 528-501-21 Red Colour Diffused 12 19 11000 643 -40 ~ +95^ -40 ~ +100 Yes 528-521-21 Yellow Colour Diffused 12 19 16000 591 -40 ~ +95^ -40 ~ +100 Yes 528-532-21 Green Colour Diffused 12 20 23000 527 -40 ~ +95^ -40 ~ +100 Yes 528-930-21 Blue Colour Diffused 12 20 7000 470 -40 ~ +95^ -40 ~ +100 Yes 528-997-21 Cool White Colour Diffused 12 20 14000 *see below -40 ~ +95^ -40 ~ +100 Yes 528-501-23 Red Colour Diffused 24-28 20 11000 643 -40 ~ +95^ -40 ~ +100 Yes 528-521-23 Yellow Colour Diffused 24-28 20 16000 591 -40 ~ +95^ -40 ~ +100 Yes 528-532-23 Green Colour Diffused 24-28 20 23000 527 -40 ~ +95^ -40 ~ +100 Yes 528-930-23 Blue Colour Diffused 24-28 20 7000 470 -40 ~ +95^ -40 ~ +100 Yes 528-997-23 Cool White Colour Diffused 24-28 20 14000 *see below -40 ~ +95^ -40 ~ +100 Yes Vdc mA mcd nm °C °C UNITS Other voltages AC/DC available. Please contact our Technical Sales. ^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs. 997F-C *Typical emission colour cool white 0.245 0.361 0.356 0.264 y 0.229 0.385 0.351 0.220 x Intensities (lv) and colour shades of white (x,y co-ordinates) may vary between LEDs within a batch. How to Order: website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2008 : DS 037/06 Issue 4 SAMPLES AVAILABLE BS EN ISO 9001:2000 Approved Manufacturer Page 1 of 3 528 Series Mounting Hole + on rear of header denotes anode +ve. Dimensions in mm (Typical) Mounting hole to be clean and burr free Not to scale MATERIALS PUSH-ON CONNECTORS Body Stainless steel grade 303 Nut Stainless steel grade 303 Panel Seal Viton Termination Brass to BS 2874 CZ108 Copper flash undercoat with silver flash finish Lock Washer Stainless steel Fresnel lens Polycarbonate Encapsulation PC5430 resin Header Nylon 6 A82 925-000-00 is brass tin plated. For use with 528 series lamps. Dimensions in mm (Typical) Not to scale TECHNICAL CHARACTERISTICS SERIES MAXIMUM MAXIMUM POWER DISSIPATION 528 PANEL REVERSE CUTOUT VOLTAGE 825 1000 mw Vdc * = current version NUT MOUNTING TORQUE MINIMUM MOUNTING CENTRES MIN/MAX. PANEL THICKNESS 13.0 1.0 x,y=26.0 2.0-10.0 mm Nm mm mm • = voltage version OPTIONAL FLYING LEAD TERMINATIONS ORDER CODE SUFFIX SUPPLY WIRE VOLTAGE WIRE COLOUR LENGTH 15 DC Products Red-anode / Black-cathode 150mm 15 AC Products Brown-live / Blue-neutral 150mm 19 DC Products Red-anode / Black-cathode 1000mm 19 AC Products Brown-live / Blue-neutral 1000mm NO/DIAMETER DIAMETER CONDUCTORS INSULATION 19/0.15mm 1.2mm OF OVER COMMENTS Customised lengths available website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2008 : DS 037/06 Issue 4 SAMPLES AVAILABLE BS EN ISO 9001:2000 Approved Manufacturer Page 2 of 3 DERATING INFORMATION 501 & 521 532, 930 & 997 ALSO AVAILABLE Part numbers also available in the 528 Series: PART NO. COLOUR VOLTAGE DC PART NO. COLOUR (Vdc) Vopr 528-000-00-50 125 VDC 528-501-04 Red 20mA 528-501-21-15 Red 12 VDC 528-501-21-19 Red 12 VDC 528-501-22 Red 24 VDC 528-501-22-15 Red 24 VDC 528-501-22-19 Red 24 VDC 528-501-22-50 Red 24 VDC 528-501-23-15 Red 28 VDC 528-501-24-19 Red 48 VDC 528-501-25 Red 110 VDC 528-501-72 Red 24 VAC 528-501-75 Red 110 VAC 528-501-76 Red 230 VAC 528-501-76-15 Red 230 VAC 528-501-76-50 Red 230 VAC 528-501-86 Red 115 VAC 528-506-23 Orange 28 VDC 528-512-21-15 Green 12 VDC 528-512-22-15 Green 24 VDC 528-512-76 Green 230 VAC 528-521-04 Yellow 20mA 528-521-21-19 Yellow 12 VDC 528-521-22 Yellow 24 VDC 528-521-22-15 Yellow 24 VDC 528-521-22-19 Yellow 24 VDC 528-521-22-50 Yellow 24 VDC UNITS VOLTAGE DC PART NO. COLOUR (Vdc) Vopr 528-521-23-15 528-521-23-50 Yellow Yellow 28 VDC 28 VDC 528-521-53 Yellow 50 VDC 528-521-72 Yellow 24 VAC 528-521-75 Yellow 110 VAC 528-521-76 Yellow 230 VAC 528-521-76-50 Yellow 230 VAC 528-521-86 Yellow 115 VAC 528-532-04 Green 20mA 528-532-20 Green 5/6 VDC 528-532-21-19 Green 12 VDC 528-532-22 Green 24 VDC 528-532-22-19 Green 24 VDC 528-532-22-50 Green 24 VDC 528-532-24 Green 48 VDC 528-532-25 Green 110 VDC 528-532-42 Green 15 VDC 528-532-72 Green 24 VAC 528-532-74 Green 48 VAC 528-532-75 Green 110 VAC 528-532-76 Green 230 VAC 528-532-76-19 Green 230 VAC 528-532-76-21 Green 230 VAC 528-532-76-50 Green 230 VAC 528-532-86 Green 115 VAC 528-930-04 Blue 20mA 528-930-04-15 Blue 20mA VOLTAGE DC (Vdc) Vopr 528-930-04-50 Blue 20mA 528-930-04-51 Blue 20mA 528-930-21-19 Blue 12 VDC 528-930-22 Blue 24 VDC 528-930-25 Blue 110 VDC 528-930-75 Blue 110 VAC 528-930-76 Blue 230 VAC 528-997-04 White 20mA 528-997-21-19 White 12 VDC 528-997-22 White 24 VDC 528-997-22-19 White 24 VDC 528-997-22-50 White 24 VDC 528-997-24 White 48 VDC 528-997-72 White 24 VAC 528-997-75 White 110 VAC 528-997-76 White 230 VAC 528-997-76-19 White 230 VAC 528-997-76-50 White 230 VAC 528-997-86 White 115 VAC UNITS UNITS The products listed above illustrate all of the options available to order. These products may have custom modifications that alter their operation beyond the generic information contained within this datasheet. Please contact sales for further information. website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2008 : DS 037/06 Issue 4 SAMPLES AVAILABLE BS EN ISO 9001:2000 Approved Manufacturer Page 3 of 3