FEATURES PROFESSIONAL LED INDICATORS Ø25.4mm Mounting 672 SERIES l Black anodised aluminium housing PACK QUANTITY = 1 PIECE l RIA 12 approved versions available l Sealed to IP67 l Internal reverse protection diode fitted as standard in all voltage models. l Large LED indication l AC Version available upon request SPECIFICATION Ordering Information & Typical Technical Characteristics (Ta = 25°C) Mean Time Between Failure = 100,000 Hours. Luminous intensity figures refer to the unmodified discrete LED. PART NUMBER COLOUR LENS VOLTAGE DC (Vdc) Vopr CURRENT DC (mA) lopr LUMINOUS WAVE INTENSITY LENGTH lv@20mA (mcd) λp (nm) OPERATING TEMP Topr STORAGE TEMP Tstg -40 ~ +85^ -40 ~ +85 STANDARD INTENSITY 672-290-22 672-291-22 Red Yellow Colour Diffused 24 Colour Diffused 24 19 19 20 Colour Diffused 110vac/dc 19 30 672-292-22 Green Colour Diffused 24 672-291-75 Yellow Colour Diffused 110vac/dc 19 672-290-75 Red 30 19 625 Yes 590 -40 ~ +85^ -40 ~ +85 Yes 625 -40 ~ +85^ -40 ~ +85 Yes 200 565 -40 ~ +85^ 20 200 590 565 -40 ~ +85^ -40 ~ +85 Yes Green Colour Diffused 110vac/dc 10 672-289-22 Red Colour Diffused 24 19 400 660 -40 ~ +85^ -40 ~ +85 Yes 672-294-22 Blue Colour Diffused 24 19 19 468 -40 ~ +85^ -40 ~ +85 Yes 672-293-22 672-295-22 672-289-75 672-293-75 672-294-75 672-295-75 UNITS Yellow Cool White Red Yellow Blue Cool White Colour Diffused 24 Colour Diffused 24 19 19 820 890 Colour Diffused 110vac/dc 10 400 Colour Diffused 110vac/dc 10 19 Colour Diffused 110vac/dc 10 Colour Diffused 110vac/dc 10 Vdc mA 820 890 mcd 590 -40 ~ +85^ -40 ~ +85 Yes 672-292-75 HIGH INTENSITY -40 ~ +85^ -40 ~ +85 -40 ~ +85 Yes Yes see below -40 ~ +85^ -40 ~ +85 Yes 590 -40 ~ +85^ -40 ~ +85 Yes 660 468 see below nm -40 ~ +85^ -40 ~ +85^ -40 ~ +85^ °C -40 ~ +85 -40 ~ +85 -40 ~ +85 °C Yes Yes Yes Other voltages AC/DC available. Please contact our Technical Sales. ^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs. Appropriate LED numbers shown - Refer to page 2. The -75 products will operate at 110Vac or 110DC. Intensities (lv) and colour shades of white (x,y co-ordinates) may vary between LEDs within a 295 *Typical emission colour cool white batch. x 0.248 0.391 0.380 0.280 y 0.286 0.436 0.381 0.284 How to Order: website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service. © MARL INTERNATIONAL LTD 2007 : DS 049/06 Issue 2 SAMPLES AVAILABLE Page 1 of 2 672 Series Mounting Hole Anode termination indicated by colour dot. Mounting hole to be clean and burr free. Dimensions in mm (Typical) Not to scale MATERIALS PUSH-ON CONNECTORS Body Black Anodised Aluminium Nut Aluminium Panel Seal Neoprene Termination Tags Tin Plated Brass Lens Epoxy Encapsulation PC5430 resin Lock Washer Spring Washer 926-000-00 is brass tin plated, vinyl insulation. For use with 672 series lamps. Dimensions in mm (Typical) Not to scale TECHNICAL CHARACTERISTICS SERIES 672 UNITS MAXIMUM POWER DISSIPATION 2500 mW PANEL CUTOUT 25.4 Vdc NUT MOUNTING TORQUE 1.2 mm MINIMUM MOUNTING CENTRES x,y = 41.0 Nm MIN/MAX. PANEL THICKNESS 2.0-10.0 mm DERATING INFORMATION 289, 290, 291, 293, 294 & 295 292 website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply for products or service. © MARL INTERNATIONAL LTD 2007 : DS 049/06 Issue 2 BS EN ISO 9001:2000 Approved Manufacturer Page 2 of 2