ECO-PACTM 2 PSDI 33/06 Three Phase Rectifier Bridge with IGBT and Fast Recovery Diode for Braking System IC25 VCES IFAV25 VRRM = 44 A = 600 V = 18 A = 1200 V Preliminary Data Sheet X IGBT KEG V P S MA Symbol Test Conditions VCES VGES IC25 IC80 RBSOA TVJ = 25 °C to 150 °C Maximum Ratings 600 V continuous ±20 V 1 A NTC optional TC = 25 °C 44 TS = 80 °C 30 A VCE = 600 V, RG = 10 Ω, TVJ = 125 °C ICM = 100 A clamped inductive load, L = 100 µH VCEK≤VCES VCE = 600 V, VGE = ±15 V, RG = 10 Ω, tSC 10 3 µs TVJ = 125 °C, non-repetitive Symbol Test Conditions Characteristic Values TVJ = 25 °C, unless otherwise specified VCE(sat) VCE(sat) VCE(sat) VGE(th) VGE(th) ICES ICES IGES td(on) tr td(off) tf Eon Eoff Cies QGon RthJC RthJH VGE = 15 V, IC = 10 A, TVJ = 25 °C max. 1.8 V VGE = 15 V, IC = 10 A, TVJ = 25 °C typ. 1.5 V TVJ = 125 °C typ. 1.6 V TVJ TJM Tstg Visol Md Weight High level of integration - only one power semiconductor module required for the whole braking system module Isolation voltage 3600 V∼ Planar glass passivated chips Ultrafast freewheel diode min. 3 V VGE = VCE, IC = 1 mA max. 5 V VCE = VCES, VGE = 0 V, TVJ = 25 °C max. 0.04 mA 1 mA max. 100 nA typ. 31 ns typ. 50 ns typ. 291 ns typ. 70 ns Applications typ. 0.60 mJ typ. 0.31 mJ • typ. 1600 pF VCE = 0 V, VGE = ±20 V } Symbol • VGE = VCE, IC = 1 mA TVJ = 125 °C typ. Module Features inductive load, TVJ = 125 °C VCE = 400 V, IC = 10 A VGE = ±15 V, RG = 10 Ω VCE = 25 V, f = 1 MHz, VGE = 0 V VCE = 480 V, IC = 10 A, VGE = 15 V typ. Test Conditions 140 nC max. 0.96 K/W max. tbd K/W Maximum Ratings -40...+150 °C 150 °C -40...+150 °C 50/60 Hz t = 1 min 3000 V∼ Iisol ≤ 1 mA t=1s 3600 V∼ 1.5-2.0 Nm 24 g Mounting torque (M 4) typ. • • • • • Leads suitable for PC board soldering Thermistor (optional) Drive inverters with brake system Advantages • • • • • Easy to mount with two screws Space and weight savings high temperature and power cycling capability Small and light weight 2 functions in one package Caution: These Devices are sensitive to electrostatic discharge. Users should observe proper ESD handling precautions. Data according to IEC 60747 refer to a single diode unless otherwise stated 2005 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20 ECO-PACTM 2 Fast Recovery Diode Symbol Test Conditions VRRM IF25 IF80 TVJ = 25 °C to 150 °C Symbol Test Conditions Maximum Ratings 600 V TC = 25 °C 30 A TC = 80 °C 19 A Package style and outline Dimensions in mm (1mm = 0.0394“) Characteristic Values TVJ = 25 °C, unless otherwise specified VF IF = 10 A, TVJ = 25 °C max. 3.2 V TVJ = 25 °C typ. 2.2 V TVJ = 125 °C max. 2.4 V TVJ = 25 °C max. 0.1 mA TVJ = 125 °C typ. IR VR = VRRM, 0.1 mA IRM trr RthJC RthJH IF = 10 A, diF/dt = -400 A/µs, TVJ = 125 °C tbd A VR = 400 V tbd ns 1.15 K/W tbd K/W max. with heat transfer paste Rectifier Diodes Symbol VRRM IFAV25 IFAV80 IFSM Symbol Test Conditions Maximum Ratings 1200 V TC = 25 °C, sine 180 ° 41 A TC = 80 °C, sine 180 ° 28 A TVJ = 25 °C, 75 A T = 10 ms (50Hz) Test Conditions Characteristic Values TVJ = 25 °C, unless otherwise specified VF IF = 10 A, TVJ = 25 °C max. 1.8 V TVJ = 25 °C typ. 1.4 V TVJ = 125 °C typ. 1.6 V TVJ = 25 °C max. 0.05 mA TVJ = 125 °C IR VR = VRRM, typ. 0.5 mA trr RthJC RthJH VR = 100 V, IF = 10 A, -di/dt = 5 A/µs typ. 1 µs 2.5 K/W tbd K/W per diode with heat transfer paste max. Module Symbol Test Conditions ds dA a R25* Creeping distance on surface Creeping distance in air Max. allowable acceleration NTC @ 25 °C Characteristic Values 11.2 5 50 470.000 mm mm m/s² Ω *NTC will be changed in future to 5.000 Ω. 2005 POWERSEM reserves the right to change limits, test conditions and dimensions POWERSEM GmbH, Walpersdorfer Str. 53 D - 91126 Schwabach Phone: 09122 - 9764 - 0 FAX: 09122 - 9764 - 20