AND5BB Ultra Bright LED Lamps Weight: 2.0 mg Unit: mm Cathode Index 3.2±0.2 ø1.8±0.1 2.2±0.1 R0.9±0.1 Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product. AND5BB InGaN Ultra Bright Blue Light Emission Surface Mount Package Features • RoHS Compliant • Small package size (12mm tape on 7" diameter reel) • Compatible with automatic placement equipment • Compatible with infrared & vapor phase reflow solder process • Mono-color type 0.5±0.1 0.5±0.1 2.4±0.1 2.5±0.2 2.0 Maximum Ratings (Ta = 25°C) Polarity Characteristics Symbol Rating Unit Forward Current IF 30 mA Reverse Voltage VR 5 V Power Dissipation PD 120 mW Operating Temperature Range TOpr -20 to 80 °C Storage Temperature Range TStg -30 to 90 °C Electro-Optical Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Minimum Typical Maximum Unit Forward Voltage VF IF = 20 mA – 3.5 4.0 V Reverse Current IR VR = 5 V – – 10 µA Luminous Intensity IV IF = 20 mA 118 150 – mcd Peak Emission Wavelength lP IF = 20 mA – 468 – nm Spectral Line Half Width ∆l IF = 20 mA – 40 – nm Dominant Wavelength ld IF = 20 mA – 470 – nm Full Viewing Angle θ IV = 1/2 Peak – 30 – degree Precaution Please be careful of the following: 1. Manual soldering: maximum temperature of iron tip: 260°C max. Soldering time: within 5 sec. per solder-land Soldering portion of lead: up to 1.6 mm from the body of the device 2. Reflow solder: recommended condition is as follows: 3. Absolute secure counter measures against static electricity and surge should be taken when handling these products. It is recommended to use wrist band or antistatic gloves when handling these LEDs. Temperature 10 sec. max. 140 - 160°C 230°C max. more than 2 min. 4°C/sec. max. Time Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] www.purdyelectronics.com 06-01-02 AND5BB InGaN Ultra Bright Blue Light Emission Surface Mount Package IV — IF IF — VF 1000 50 Ta = 25°C Ta = 25°C Luminous Intensity IV (mcd) Forward Current IF (mA) Ultra Bright LED 40 30 20 100 10 0 1.8 10 2.4 3.0 3.6 4.2 4.8 5.4 10 Forward Current IF (mA) 1 6.0 Forward Voltage VF (V) IV — TC Relative Luminous Intensity — Wavelength 1000 1.0 Relative Luminous Intensity Relative Luminous Intensity 100 100 10 1 -20 0 20 40 60 IF = 20 mA Ta = 25°C 0.8 0.6 0.4 0.2 0 80 390 Case Temperature TC (°C) Radiation Pattern 430 510 470 550 Wavelength λ (nm) 590 IF — Ta 20° 10° 0° 10° Ta = 25°C 20° 30° 30° 40° 40° 50° 50° 60° 60° 70° 70° 80° 80° Allowable Forward Current IF (mA) 40 30 20 10 90° 90° 0 0.2 0.4 0.6 0.8 0 0 20 40 60 80 Ambient Temperature Ta (°C) Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] www.purdyelectronics.com 100 06-01-02