AND6GA Ultra Bright LED Lamps: Type 2 Weight: 2.0 mg Unit: mm AND6GA InGaN Ultra Bright Green Top LEDS Features • P-LLC-2 package with optical indicator • RoHS Compliant • Low (2mA) current operation • Wide viewing angle • Inter reflector • Suitable for vapor phase refow, infrared reflow, and wave solder processes • Compatible w/automatic placement equipment • Ideal for (LCD) backlight and light pipe applications Maximum Ratings (Ta = 25°C) Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product. Characteristics Symbol Rating Unit Forward Current IF 30 mA Reverse Voltage VR 5 V Power Dissipation PD 120 mW Operating Temp. Range TOpr -40 to 85 °C Storage Temp. Range TStg -40to 90 °C Electro-Optical Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Minimum Typical Maximum Unit Forward Voltage VF IF = 20 mA 3.1 3.5 3.8 V Reverse Current IR VR = 5 V – – 10 µA Luminous Intensity IV IF = 20 mA 110 170 – mcd Peak Emission Wavelength lP IF = 20 mA – 525 – nm Spectral Line Half Width ∆l IF = 20 mA – 45 – nm Dominant Wavelength ld IF = 20 mA – 530 – nm 2 q 1/2 IF = 20 mA – 120 – degree Full Viewing Angle Precaution 3. Absolute secure counter measures against Please be careful of the following: static electricity and surge should be taken 1. Manual soldering: maximum temperature of iron tip: 260°C max. when handling these products. It is Soldering time: within 5 sec. per solder-land recommended to use wrist band or antistatic Soldering portion of lead: up to 1.6 mm from the body of the device gloves when handling these LEDs. 2. Reflow solder: recommended condition is as follows: Temperature 10 sec. max. 140 - 160°C 230°C max. more than 2 min. 4°C/sec. max. Time Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] www.purdyelectronics.com 7/18/07 AND6GA InGaN Ultra Bright Green Top LEDS Ultra Bright LED Lamps: Type 2 IF – VF IV – IF 50 1000 Luminous Intensity IV (mcd) Ta = 25°C Forward Current IF (mA) 40 30 20 100 10 1 2.5 3.5 3.0 4.0 1 4.5 3 5.0 10 5 30 50 Forward Current IF (mA) 100 Forward Voltage VF (V) Relative Luminous Intensity – Wavelength IV – TC 1000 1.0 IF = 20 mA Ta = 25°C Relative Luminous Intensity Relative Luminous Intensity Ta = 25°C 100 10 1 0.8 0.6 0.4 0.2 0 -20 0 20 40 80 60 500 Case Temperature TC (°C) Radiation Pattern 550 650 600 700 Wavelength λ (nm) 750 IF – Ta 20° 10° 0° 10° Ta = 25°C 20° 30° 30° 40° 40° 50° 50° 60° 60° 70° 70° 80° 80° Allowable Forward Current IF (mA) 40 30 20 10 90° 90° 0 0.2 0.4 0.6 0.8 0 0 20 40 60 80 Ambient Temperature Ta (°C) Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] www.purdyelectronics.com 100 7/18/07