CEL UPG2159T5K

PRELIMINARY DATA SHEET
GaAs INTEGRATED CIRCUIT
uPG2159T5K
L,S-BAND MINIATURE SPDT SWITCH
DESCRIPTION
The uPG2159T5K is a GaAs MMIC L,S-band SPDT (Single Pole Double Throw) switch designed for
mobile phone and the other L,S-band applications.
This device can operate from frequency 0.05GHz to 3.0GHz, with low insertion loss and high isolation
This device is housed in a 6-pin TSSON (Thin Shrink Small Out-line Non-Leaded) package, and is suitable
for high-density surface mounting.
FEATURES
㹺 Switch Control Voltage
㹺 Low Insertion Loss
㹺 High Isolation
㹺 Power Handling
㹺 High-density surface mounting
: Vcont㸝H㸞= 1.8 to 3.3V㸝2.7V TYP.㸞
: Vcont㸝L㸞 = -0.2 to 0.2V㸝0V TYP.㸞
: Lins1 = 0.20dB [email protected] f = 0.05 to 0.5GHz, Vcont(H) = 2.7V, Vcont(L) = 0V
: Lins2 = 0.21dB [email protected] f = 0.5 to 1.0GHz, Vcont(H) = 2.7V, Vcont(L) = 0V
: Lins3 = 0.23dB [email protected] f = 1.0 to 2.0GHz, Vcont(H) = 2.7V, Vcont(L) = 0V
: Lins4 = 0.25dB [email protected] f = 2.0 to 2.5GHz, Vcont(H) = 2.7V, Vcont(L) = 0V
: Lins5 = 0.27dB [email protected] f = 2.5 to 3.0GHz, Vcont(H) = 2.7V, Vcont(L) = 0V
: ISL1 = 27dB TYP. @ f = 0.05 to 0.5GHz, Vcont(H) = 2.7V, Vcont(L) = 0V
: ISL2 = 27dB TYP. @ f = 0.5 to 1.0GHz, Vcont(H) = 2.7V, Vcont(L) = 0V
: ISL3 = 27dB TYP. @ f = 1.0 to 2.0GHz, Vcont(H) = 2.7V, Vcont(L) = 0V
: ISL4 = 27dB TYP. @ f = 2.0 to 2.5GHz, Vcont(H) = 2.7V, Vcont(L) = 0V
: ISL5 = 27dB TYP. @ f = 2.5 to 3.0GHz, Vcont(H) = 2.7V, Vcont(L) = 0V
: Pin㸝1dB㸞= +25.5dBm [email protected] f = 0.5 to 3.0GHz, Vcont(H) = 2.7V, Vcont(L) = 0V
: Pin㸝0.1dB㸞= +22.0dBm [email protected] f = 0.5 to 3.0GHz, Vcont(H) = 2.7V, Vcont(L) = 0V
: 6-pin TSSON package㸝1.0 ™ 1.0 ™ 0.37 mm㸞
APPLICATIONS:
㹺 L,S-band digital cellular or cordless telephone
㹺 W-LAN, Bluetooth , ZigBee, etc.
TM
ORDERING INFORMATION
Part Number
Order Number
Package
Marking
Supplying Form
uPG2159T5K-E2
uPG2159T5K-E2-A
6-pin plastic TSSON
䟺Pb-Free䟻
G3
䡗 Embossed tape 8mm wide
䡗 Pin 1, 6 face the perforation side of the tape
䡗 Qty 5 kpcs/reel
Remark To order evaluation samples, contact your nearby sales office.
Part number for sample order : uPG2159T5K-A
Caution Observe precautions when handling, because these devices are sensitive to electrostatic discharge.
The information in this document is subject to change without notice.Before using this document,please
confirm that this is the latest version.
Document No. PG*****EJW5V0PDS ( 5nd edition )
Date Published November 2007 CP(K)
C NEC Elect䡄onics Corporation 2007
uPG2159T5K
PIN CONNECTIONS AND INTERNAL BLOCK DIAGRAM
㸝Top View㸞
1
G3
2
3
㸝Top View㸞
㸝Bottom View㸞
6
1
6
6
1
5
2
5
5
2
4
3
4
4
3
Pin No.
Pin Name
1
OUTPUT1
2
GND
3
OUTPUT2
4
Vcont2
5
INPUT
6
Vcont1
SW TRUTH TABLE
Vcont1
Vcont2
INPUT-OUTPUT1
INPUT-OUTPUT2
Low
High
OFF
ON
High
Low
ON
OFF
ASOLUTE MAXIMUM RATINGS㸝Unless otherwise specified, TA = +25Υ㸞
Parameter
Switch Control Voltage
Note1
Symbol
Ratings
Unit
Vcont
+6.0
V
Input Power
Note2
Pin
+26.0
dBm
Input Power
Note3
Pin
+8+Vcont䟼20/3
dBm
Operating Ambient Temperature
TA
-45 to +85
Υ
Storage Temperature
Tstg
-55 to +150
Υ
Note1 㹱Vcont1 – Vcont2㹱ӌ6.0V
Note2 2.7䍱㹱 Vcont1 – Vcont2 䡎ӌ3.3V
Note3 1.8䍱䡎 Vcont1 – Vcont2 䡎䍱2.7V
Absolute MAX_Pin 䛀䠶Bm䛁
Absolute MAX_Pin V.S. Vcont
RECOMMENDED OPERATING RANGE㸝 Unless otherwise specified, TA = +25Υ㸞
Parameter
2
Symbol
MIN.
TYP.
MAX.
Unit
Switch Control Voltage㸝H㸞
Vcont㸝H㸞
1.8
2.7
3.3
V
Switch Control Voltage㸝L㸞
Vcont㸝L㸞
-0.2
0
0.2
V
Preliminary Data Sheet
uPG2159T5K
ELECTRICAL CHARACTERISTICS1
㸝 TA = +25Υ, Vcont(H) = 2.7V, Vcont(L) = 0V,DC blocking capacitors = 56pF,Unless otherwise specified 㸞
Parameter
Symbol
Test Conditions
MIN.
TYP.
MAX.
Unit
Insertion Loss1
Lins1
f = 0.05 to 0.5GHzNote1
-
0.20
0.35
dB
Insertion Loss2
Lins2
f = 0.5 to 1.0GHz
-
0.21
0.35
dB
Insertion Loss3
Lins3
f = 1.0 to 2.0GHz
-
0.23
0.40
dB
Insertion Loss4
Lins4
f = 2.0 to 2.5GHz
-
0.25
0.42
dB
Insertion Loss5
Lins5
f = 2.5 to 3.0GHz
-
0.27
0.45
dB
24
27
-
dB
0.5GHzNote1
Isolation1
ISL1
f = 0.05 to
Isolation2
ISL2
f = 0.5 to 1.0GHz
24
27
-
dB
Isolation3
ISL3
f = 1.0 to 2.0GHz
24
27
-
dB
Isolation4
ISL4
f = 2.0 to 2.5GHz
24
27
-
dB
Isolation5
ISL5
f = 2.5 to 3.0GHz
24
27
-
dB
Input Return Loss1
RLin1
f = 0.05 to 0.5GHzNote1
15
20
-
dB
Input Return Loss2
RLin2
f = 0.5 to 3.0GHz
15
20
-
dB
Output Return Loss1
RLout1
f = 0.05 to 0.5GHzNote1
15
20
-
dB
Output Return Loss2
RLout2
f = 0.5 to 3.0GHz
15
20
-
dB
+20.0
+22.0
-
dBm
f = 0.5 to 3.0GHz
-
+22.0
-
dBm
f = 0.5 to 3.0GHz
-
+25.5
-
dBm
0.1dB Loss Compression
Input PowerNote2
Pin㸝0.1dB㸞
1dB Loss Compression
Input PowerNote3
Pin㸝1dB㸞
f = 2.0GHz/2.5GHz
2nd Harmonics
2f0
f = 2.0GHz/2.5GHz,
Pin=+10dBm
65
77
-
dBc
3rd Harmonics
3f0
f = 2.0GHz/2.5GHz,
Pin=+10dBm
60
80
-
dBc
Input Intercept Point
IIP3
f = 0.5 to 3.0GHz, 2tone
5MHz spacing
-
+49.0
-
dBm
Switch Control Current
Icont
-
0.2
1.0
uA
Switch Control Speed
tSW
-
20
200
ns
50䟸 CTL to 90/10䟸
Note1. DC blocking capacitors = 1000pF 0.05 to 0.5GHz
Note2. Pin㸝0.1dB㸞is the measured input power level when the insertion loss increases 0.1dB more than that of linear range.
Note3. Pin㸝1dB㸞is the measured input power level when the insertion loss increases 1dB more than that of linear range.
Preliminary Data Sheet
3
uPG2159T5K
ELECTRICAL CHARACTERISTICS2
㸝 TA = +25Υ, Vcont(H) = 1.8V, Vcont(L) = 0V,DC blocking capacitors = 56pF,Unless otherwise specified 㸞
Parameter
Symbol
Test Conditions
MIN.
TYP.
MAX.
Unit
Insertion Loss6
Lins6
f = 0.05 to 0.5GHzNote1
-
0.21
0.36
dB
Insertion Loss7
Lins7
f = 0.5 to 1.0GHz
-
0.22
0.37
dB
Insertion Loss8
Lins8
f = 1.0 to 2.0GHz
-
0.24
0.41
dB
Insertion Loss9
Lins9
f = 2.0 to 2.5GHz
-
0.26
0.43
dB
Insertion Loss10
Lins10
f = 2.5 to 3.0GHz
-
0.28
0.46
dB
23
26
-
dB
0.5GHzNote1
Isolation6
ISL6
f = 0.05 to
Isolation7
ISL7
f = 0.5 to 1.0GHz
23
26
-
dB
Isolation8
ISL8
f = 1.0 to 2.0GHz
23
26
-
dB
Isolation9
ISL9
f = 2.0 to 2.5GHz
23
26
-
dB
Isolation10
ISL10
f = 2.5 to 3.0GHz
23
26
-
dB
Input Return Loss3
RLin3
f = 0.05 to 0.5GHzNote1
15
20
-
dB
Input Return Loss4
RLin4
f = 0.5 to 3.0GHz
15
20
-
dB
Output Return Loss3
RLout3
f = 0.05 to 0.5GHzNote1
15
20
-
dB
Output Return Loss4
RLout4
f = 0.5 to 3.0GHz
15
20
-
dB
f = 2.0GHz/2.5GHz
12
+15.5
-
dBm
f = 0.5 to 3.0GHz
-
+15.5
-
dBm
f = 0.5 to 3.0GHz
-
+19.5
-
dBm
0.1dB Loss Compression
Input PowerNote2
Pin㸝0.1dB㸞
1dB Loss Compression
Input PowerNote3
Pin㸝1dB㸞
Switch Control Current
Icont
RF None
-
0.2
1.0
uA
Switch Control Speed
tSW
50䟸 CTL to 90/10䟸 RF
-
20
200
ns
Note1. DC blocking capacitors = 1000pF 0.05 to 0.5GHz
Note2. Pin㸝0.1dB㸞is the measured input power level when the insertion loss increases 0.1dB more than that of linear range.
Note3. Pin㸝1dB㸞is the measured input power level when the insertion loss increases 1dB more than that of linear range.
4
Preliminary Data Sheet
uPG2159T5K
EVALUATION CIRCUIT
Vcont1 INPUT Vcont2
C0
1000pF
1000pF
6
4
5
C0 : f = 0.05 to 0.5GHz 1000pF
f = 0.5 to 3.0GHz 56pF
1
2
C0
3
C0
OUTPUT1
OUTPUT2
The application circuits and their parameters are for reference only and are not intended for use in actual
design-ins.
Preliminary Data Sheet
5
uPG2159T5K
MOUNTING PAD AND SOLDER MASK LAYOUT DIMENSIONS
6-PIN PLASTIC TSSON 䟺UNIT: mm䟻
MOUNTING PAD
0.15
0.275
0.275
0.275
0.15
0.15
0.15
0.60
0.15
0.45
0.275
0.15
0.15
0.60
0.65
0.225
0.35
0.275
0.325
0.125
0.60
0.60
SOLDER MASK
0.13
0.13
0.45
0.15
0.13
0.13
0.20
0.075
0.13
0.60
0.13
0.60
0.20
0.225
0.60
0.375
0.60
Solder thickness:0.08 mm
Remark
6
The mounting pad and solder mask layouts in this document are for reference only.
Preliminary Date Sheet
uPG2159T5K
6-PIN TSSON㸝UNIT: mm㸞
Preliminary Data Sheet
7
uPG2159T5K
RECOMMENDED SOLDERING CONDITIONS
This product should be soldered and mounted under the following recommended conditions. For soldering methods and
conditions other than those recommended below, contact your nearby sales office.
Soldering Method
Soldering Conditions
Condition Symbol
Infrared Reflow
Peak temperature㸝package surface temperature㸞
Time at peak temperature
Time at temperature of 220Υ or higher
Preheating time at 120 to 180Υ
Maximum number of reflow processes
Maximum chlorine content of rosin flux㸝㸚 mass㸞
: 260Υ or below
: 10 seconds or less
: 60 seconds or less
: 120s30 seconds
: 3 times
: 0.2 㸚㸝Wt.㸞or below
IR260
Wave soldering
Peak temperature㸝molten solder temperature㸞
: 260Υ or below
Time at peak temperature
: 10 seconds or less
Preheating temperature㸝package surface temperature㸞 : 120Υ or below
Maximum number of reflow processes
: 1 time
Maximum chlorine content of rosin flux㸝㸚 mass㸞
: 0.2 㸚㸝Wt.㸞or below
WS260
Partial Heating
Peak temperature㸝pin temperature㸞
Soldering time㸝per side of device㸞
Maximum chlorine content of rosin flux㸝㸚 mass㸞
HS350
: 350Υ or below
: 3 seconds or less
: 0.2 㸚㸝Wt.㸞or below
Caution Do not use different soldering methods together㸝except for partial heating㸞.
8
Preliminary Data Sheet
uPG2159T5K
Preliminary Data Sheet
9
uPG2159T5K
SAFETY INFORMATION ON THIS PRODUCT
Caution
10
GaAs products
The product contains gallium arsenide, GaAs.
GaAs vapor and powder are hazardous to human health if inhaled or ingested.
㹺 Do not destroy or burn the product.
㹺 Do not cut or cleave off any part of the product.
㹺 Do not crush or chemically dissolve the product.
㹺 Do not put the product in the mouth.
Follow related laws and ordinances for disposal. The product should be from general
industrial waste or household garbage.
Preliminary Data Sheet
4590 Patrick Henry Drive
Santa Clara, CA 95054-1817
Telephone: (408) 919-2500
Facsimile: (408) 988-0279
Subject: Compliance with EU Directives
CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant
with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous
Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive
2003/11/EC Restriction on Penta and Octa BDE.
CEL Pb-free products have the same base part number with a suffix added. The suffix –A indicates
that the device is Pb-free. The –AZ suffix is used to designate devices containing Pb which are
exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals.
All devices with these suffixes meet the requirements of the RoHS directive.
This status is based on CEL’s understanding of the EU Directives and knowledge of the materials that
go into its products as of the date of disclosure of this information.
Restricted Substance
per RoHS
Concentration Limit per RoHS
(values are not yet fixed)
Concentration contained
in CEL devices
-A
Not Detected
Lead (Pb)
< 1000 PPM
Mercury
< 1000 PPM
Not Detected
Cadmium
< 100 PPM
Not Detected
Hexavalent Chromium
< 1000 PPM
Not Detected
PBB
< 1000 PPM
Not Detected
PBDE
< 1000 PPM
Not Detected
-AZ
(*)
If you should have any additional questions regarding our devices and compliance to environmental
standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance
content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information
provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better
integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate
information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL
suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for
release.
In no event shall CEL’s liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to
customer on an annual basis.
See CEL Terms and Conditions for additional clarification of warranties and liability.