UPG2159T6R

GaAs INTEGRATED CIRCUIT
PG2159T6R
D
L, S-BAND SPDT SWITCH
UE
DESCRIPTION
The PG2159T6R is a GaAs MMIC for L, S-band SPDT (Single Pole Double Throw) switch which was developed
for mobile phone and another L, S-band applications.
This device can operate 2 control switching by control voltage 1.8 to 3.3 V. This device can operate frequency
from 0.05 GHz to 3.0 GHz, having the low insertion loss and high isolation.
This device is housed in a 6-pin plastic TSSON (Thin Shrink Small Out-line Non-leaded) (T6R) package. And this
package is able to high-density surface mounting.
FEATURES
• Switch control voltage
•
•
•
APPLICATIONS
Vcont (H) = 1.8 to 3.3 V (2.7 V TYP.)
Vcont (L) = 0.2 to 0.2 V (0 V TYP.)
Lins1 = 0.20 dB TYP. @ f = 0.05 to 0.5 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V
Lins2 = 0.21 dB TYP. @ f = 0.5 to 1.0 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V
Lins3 = 0.23 dB TYP. @ f = 1.0 to 2.0 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V
Lins4 = 0.25 dB TYP. @ f = 2.0 to 2.5 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V
Lins5 = 0.27 dB TYP. @ f = 2.5 to 3.0 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V
ISL1 = 27 dB TYP. @ f = 0.05 to 0.5 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V
ISL2 = 27 dB TYP. @ f = 0.5 to 1.0 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V
ISL3 = 27 dB TYP. @ f = 1.0 to 2.0 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V
ISL4 = 27 dB TYP. @ f = 2.0 to 2.5 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V
ISL5 = 27 dB TYP. @ f = 2.5 to 3.0 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V
Pin (1 dB) = +25.5 dBm TYP. @ f = 0.5 to 3.0 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V
Pin (0.1 dB) = +22.0 dBm TYP. @ f = 0.5 to 3.0 GHz, Vcont (H) = 2.7 V, Vcont (L) = 0 V
6-pin plastic TSSON (T6R) package (1.0  1.0  0.37 mm)
O
NT
IN
•
:
:
Low insertion loss
:
:
:
:
:
High isolation
:
:
:
:
:
Handling power
:
:
High-density surface mounting :
• L, S-band digital cellular or cordless telephone
TM
• W-LAN and Bluetooth
SC
ORDERING INFORMATION
Part Number
Order Number
PG2159T6R-E2
PG2159T6R-E2-A
Package
6-pin plastic TSSON
(T6R) (Pb-Free)
Marking
G7
Supplying Form
 Embossed tape 8 mm wide
 Pin 1, 6 face the perforation side of the tape
 Qty 5 kpcs/reel
Remark To order evaluation samples, contact your nearby sales office.
DI
Part number for sample order: PG2159T6R-A
Caution: Observe precautions when handling because these devices are sensitive to electrostatic discharge
Document No. PG10710EJ01V0DS (1st edition)
Date Published June 2008 NS
PG2159T6R
PIN CONNECTIONS AND INTERNAL BLOCK DIAGRAM
Pin Name
1
OUTPUT1
2
GND
3
OUTPUT2
4
Vcont2
5
INPUT
6
Vcont1
UE
D
Pin No.
Remark Exposed pad : GND
TRUTH TABLE
Vcont1
Vcont2
INPUTOUTPUT1
INPUTOUTPUT2
Low
High
OFF
ON
High
Low
ON
O
NT
IN
OFF
ABSOLUTE MAXIMUM RATINGS (T A = +25C, unless otherwise specified)
Parameter
Switch Control Voltage
Input Power
Symbol
Vcont
Pin
Input Power
Pin
Ratings
6.0
+26.0
Unit
Note1
V
Note2, 4
+8 + Vcont  20/3
Note3, 4
dBm
dBm
Operating Ambient Temperature
TA
45 to +85
C
Storage Temperature
Tstg
55 to +150
C
Vcont1  Vcont2  6.0 V
2.7 V  Vcont1  Vcont2  3.3 V
1.8 V  Vcont1  Vcont2  2.7 V
Please refer to following chart.
DI
SC
Notes 1.
2.
3.
4.
Remark The graph indicates nominal characteristics.
2
Data Sheet PG10710EJ01V0DS
PG2159T6R
Parameter
Symbol
MIN.
TYP.
MAX.
Unit
Switch Control Voltage (H)
Vcont (H)
1.8
2.7
3.3
V
Switch Control Voltage (L)
Vcont (L)
0.2
0
+0.2
V
D
RECOMMENDED OPERATING RANGE (T A = +25C, unless otherwise specified)
ELECTRICAL CHARACTERISTICS 1
(T A = +25C, Vcont (H) = 2.7 V, Vcont (L) = 0 V, DC cut capacitors = 56 pF, unless otherwise specified)
Symbol
Test Conditions
Lins1
f = 0.05 to 0.5 GHz
Insertion Loss 2
Lins2
f = 0.5 to 1.0 GHz
Insertion Loss 3
Lins3
f = 1.0 to 2.0 GHz
Insertion Loss 4
Lins4
f = 2.0 to 2.5 GHz
Insertion Loss 5
Lins5
f = 2.5 to 3.0 GHz
Note1
TYP.
MAX.
Unit

0.20
0.35
dB

0.21
0.35
dB

0.23
0.40
dB

0.25
0.42
dB
Note1

0.27
0.45
dB
24
27

dB
f = 0.05 to 0.5 GHz
ISL2
f = 0.5 to 1.0 GHz
24
27

dB
ISL3
f = 1.0 to 2.0 GHz
24
27

dB
ISL4
f = 2.0 to 2.5 GHz
24
27

dB
ISL5
f = 2.5 to 3.0 GHz
24
27

dB
15
20

dB
15
20

dB
15
20

dB
15
20

dB
+20.0
+22.0

dBm
f = 0.5 to 3.0 GHz

+22.0

dBm
f = 0.5 to 3.0 GHz

+25.5

dBm
2f0
f = 2.0 GHz/2.5 GHz, Pin = +10 dBm
65
77

dBc
Isolation 1
Isolation 2
Isolation 3
Isolation 4
Isolation 5
Input Return Loss 1
Input Return Loss 2
Output Return Loss 1
Output Return Loss 2
O
NT
IN
ISL1
SC
Insertion Loss 1
MIN.
UE
Parameter
RLin1
f = 0.05 to 0.5 GHz
RLin2
f = 0.5 to 3.0 GHz
RLout1
f = 0.05 to 0.5 GHz
RLout2
f = 0.5 to 3.0 GHz
0.1 dB Loss Compression
Note2
Input Power
Pin (0.1 dB)
1 dB Loss Compression
Note3
Input Power
Pin (1 dB)
2nd Harmonics
Note1
Note1
f = 2.0 GHz/2.5 GHz
3rd Harmonics
3f0
f = 2.0 GHz/2.5 GHz, Pin = +10 dBm
60
80

dBc
Input 3rd Order Intercept Point
IIP3
f = 0.5 to 3.0 GHz, 2 tone

+49.0

dBm

0.2
1.0
A

20
200
ns
Switch Control Current
Icont
Switch Control Speed
tSW
5 MHz spacing
50% CTL to 90/10%
DI
Notes 1. DC cut capacitors = 1 000 pF at f = 0.05 to 0.5 GHz
2. Pin (0.1 dB) is measured the input power level when the insertion loss increases more 0.1 dB than that of
linear range.
3. Pin
(1 dB)
is measured the input power level when the insertion loss increases more 1 dB than that of
linear range.
Caution This device is used it is necessary to use DC cut capacitors.
Data Sheet PG10710EJ01V0DS
3
PG2159T6R
ELECTRICAL CHARACTERISTICS 2
(T A = +25C, Vcont (H) = 1.8 V, Vcont (L) = 0 V, DC cut capacitors = 56 pF, unless otherwise specified)
Symbol
Test Conditions
Note1
MIN.
TYP.
MAX.
Unit

0.21
0.36
dB
0.22
0.37
dB
Insertion Loss 6
Lins6
f = 0.05 to 0.5 GHz
Insertion Loss 7
Lins7
f = 0.5 to 1.0 GHz

Insertion Loss 8
Lins8
f = 1.0 to 2.0 GHz

Insertion Loss 9
Lins9
f = 2.0 to 2.5 GHz

Insertion Loss 10
Lins10
f = 2.5 to 3.0 GHz
0.28
0.46
dB
UE
dB
Note1
26

dB
23
26

dB
23
26

dB
23
26

dB
15
20

dB
15
20

dB
15
20

dB
15
20

dB
+12
+15.5

dBm
f = 0.5 to 3.0 GHz

+15.5

dBm
f = 0.5 to 3.0 GHz

+19.5

dBm
f = 0.5 to 1.0 GHz
Isolation 8
ISL8
f = 1.0 to 2.0 GHz
Isolation 9
ISL9
f = 2.0 to 2.5 GHz
Isolation 10
ISL10
f = 2.5 to 3.0 GHz
f = 0.05 to 0.5 GHz
Note1
O
NT
IN
Output Return Loss 4
0.43
23
ISL7
Output Return Loss 3
0.26
dB
Isolation 7
RLin4
dB

f = 0.05 to 0.5 GHz
Input Return Loss 4
0.41
26
ISL6
RLin3
0.24
23
Isolation 6
Input Return Loss 3

D
Parameter
f = 0.5 to 3.0 GHz
RLout3
f = 0.05 to 0.5 GHz
RLout4
f = 0.5 to 3.0 GHz
Note1
0.1 dB Loss Compression
Note2
Input Power
Pin (0.1 dB)
f = 2.0 GHz/2.5 GHz
1 dB Loss Compression
Note3
Input Power
Pin (1 dB)
Switch Control Current
Icont
RF None

0.2
1.0
A
Switch Control Speed
tSW
50% CTL to 90/10% RF

20
200
ns
Notes 1. DC cut capacitors = 1 000 pF at f = 0.05 to 0.5 GHz
2. Pin (0.1 dB) is measured the input power level when the insertion loss increases more 0.1 dB than that of
linear range.
3. Pin
(1 dB)
is measured the input power level when the insertion loss increases more 1 dB than that of
SC
linear range.
DI
Caution This device is used it is necessary to use DC cut capacitors.
4
Data Sheet PG10710EJ01V0DS
PG2159T6R
O
NT
IN
UE
D
EVALUATION CIRCUIT
Remark C0 : 0.05 to 0.5 GHz 1 000 pF
: 0.5 to 3.0 GHz 56 pF
DI
SC
The application circuits and their parameters are for reference only and are not intended for use in actual design-ins.
Data Sheet PG10710EJ01V0DS
5
PG2159T6R
MOUNTING PAD AND SOLDER MASK LAYOUT DIMENSIONS
DI
SC
O
NT
IN
UE
D
6-PIN PLASTIC TSSON (T6R) (UNIT: mm)
Remark The mounting pad and solder mask layouts in this document are for reference only.
6
Data Sheet PG10710EJ01V0DS
PG2159T6R
PACKAGE DIMENSIONS
DI
SC
O
NT
IN
UE
D
6-PIN PLASTIC TSSON (T6R) (UNIT: mm)
Remark A > 0
Data Sheet PG10710EJ01V0DS
7
PG2159T6R
RECOMMENDED SOLDERING CONDITIONS
This product should be soldered and mounted under the following recommended conditions.
For soldering
methods and conditions other than those recommended below, contact your nearby sales office.
Soldering Method
Wave Soldering
: 260C or below
Time at peak temperature
: 10 seconds or less
Time at temperature of 220C or higher
: 60 seconds or less
Preheating time at 120 to 180C
: 12030 seconds
Maximum number of reflow processes
: 3 times
Maximum chlorine content of rosin flux (% mass)
: 0.2%(Wt.) or below
Peak temperature (molten solder temperature)
: 260C or below
: 120C or below
Maximum number of flow processes
: 1 time
Maximum chlorine content of rosin flux (% mass)
: 0.2%(Wt.) or below
Peak temperature (terminal temperature)
: 350C or below
: 3 seconds or less
O
NT
IN
Maximum chlorine content of rosin flux (% mass)
: 0.2%(Wt.) or below
DI
SC
Caution Do not use different soldering methods together (except for partial heating).
8
Data Sheet PG10710EJ01V0DS
WS260
: 10 seconds or less
Preheating temperature (package surface temperature)
Soldering time (per side of device)
IR260
D
Peak temperature (package surface temperature)
Time at peak temperature
Partial Heating
Condition Symbol
UE
Infrared Reflow
Soldering Conditions
HS350
PG2159T6R
Caution GaAs Products
This product uses gallium arsenide (GaAs).
GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the
following points.
• Follow related laws and ordinances when disposing of the product. If there are no applicable laws
and/or ordinances, dispose of the product as recommended below.
D
1. Commission a disposal company able to (with a license to) collect, transport and dispose of
materials that contain arsenic and other such industrial waste materials.
2. Exclude the product from general industrial waste and household garbage, and ensure that the
product is controlled (as industrial waste subject to special control) up until final disposal.
• Do not burn, destroy, cut, crush, or chemically dissolve the product.
DI
SC
O
NT
IN
UE
• Do not lick the product or in any way allow it to enter the mouth.
Data Sheet PG10710EJ01V0DS
9