CREE LP377PWN1-60G

Cree® P4 LED
Model # LP377PWN1-60G
Data Sheet
60-degree, 7.6 x 7.6 mm LED lamp in white color with water-transparent lens and stopper
Applications
•
•
Indicators
Illuminations
Absolute Maximum Ratings (TA = 25°C)
Items
Symbol
Absolute Maximum Rating
Unit
IF
30
mA
IFP
100
mA
Reverse Voltage
VR
5
V
Power Dissipation
PD
132
mW
Operation Temperature
Topr
-40 ~ +95
°C
Storage Temperature
Tstg
-40 ~ +100
°C
Lead Soldering Temperature
Tsol
Forward Current
Peak Forward Current
Note
Max. 260°C for 3 sec. max.
(3 mm from the base of the epoxy bulb)
Note: Pulse width ≤0.1 msec, duty ≤1/10.
Typical Electrical & Optical Characteristics (TA = 25°C)
Characteristics
Symbol
Condition
Unit
Forward Voltage
VF
IF = 30 mA
V
Reverse Current
IR
VR = 5 V
μA
Luminous Intensity
IV
IF = 30 mA
mcd
Luminous Flux
ΦV
IF = 30 mA
mlm
x
IF = 30 mA
0.31
y
IF = 30 mA
0.32
2θ½H-H
IF = 30 mA
Chromaticity
Coordinates
deg
Typical
Maximum
3.6
4.4
100
770
1800
2000
70
D-CT124.000
Data Sheet: CL
50% Power Angle
Minimum
Subject to change without notice.
www.cree.com/ledlamps
Standard Bins for LP377PWN1-60G (IF = 30 mA)
Lamps are sorted to luminous intensity (IV), VF and chromaticity coordinates (x,y) bins shown.
Orders for LP377PWN1-60G may be filled with any or all bins contained as below.
All luminous intensity (IV), VF and chromaticity coordinates (x,y) values shown and specified are at IF = 30 mA.
Luminous Intensity (IV)
A1
A2
B1
B2
c
W or
above
3000 mcd
V
2130 mcd
U
1520 mcd
T
1100 mcd
S
770 mcd
Chromaticity Coordinates (x,y)
Rank
Chromaticity x
Coordinates y
A1
A2
B1
0.245
0.264
0.280
0.264
0.264
0.283
0.296
0.280
0.283
0.307
0.313
0.296
0.229
0.267
0.248
0.220
0.267
0.305
0.276
0.248
0.305
0.337
0.297
0.276
Rank
B2
Chromaticity x
Coordinates y
c
0.307
0.330
0.330
0.313
0.330
0.361
0.356
0.330
0.337
0.360
0.318
0.297
0.360
0.385
0.351
0.318
Forward Voltage (VF)
Rank
Voltage
V7
V8
V9
V10
V11
V12
V13
V14
2.8-3.0 V
3.0-3.2 V
3.2-3.4 V
3.4-3.6 V
3.6-3.8 V
3.8-4.0 V
4.0-4.2 V
4.2-4.4 V
Important Notes:
1. All ranks will be included per delivery; rank ratio will be based on the dice distribution.
2. Pb content <1000 ppm.
3. Tolerance of measurement of luminous intensity is ±15%.
4. Tolerance of measurement of the chromaticity coordinates is ±0.01.
5. Tolerance of measurement of VF is ±0.05 V.
6. Packaging methods are available for selection; please refer to the “Cree LED Lamp Packaging Standard” document.
7. Please refer to the “Cree LED Lamp Reliability Test Standards” document for reliability test conditions.
8. Please refer to the “Cree LED Lamp Soldering & Handling” document for information about how to use this LED product safely.
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.
CLD-CT124.000
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
CIE Chromaticity Diagram
CIE
CIE Chromaticity Diagram
0.90
520
530
0.80
540
510
550
0.70
560
0.60
570
490
0.50
Y
580
590
0.40
600
c
610
620
630
B2
0.30
B1
480
A2
A1
0.20
470
0.10
460
0.00
0.00
0.10
0.20
0.30
X
4/5
0.40
0.50
0.60
0.70
Format #: COTCO-D-074 REV.4
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.
CLD-CT124.000
0.80
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Document No. SPE/LP377PWN1-60G
Rev. No.
04
Graphs
Graphs
Items
Signatures
Date
Prepared by
LiuZM
2007-04-26
Rev. No
Checked by
HuangJD
2007-04-26
02
2005-08-31 Change 2T½H-H from 60deg to 70deg.
Approved by
David
2007-04-26
03
2005-10-18 Release.
04
2007-04-26 Change tolerance of CIE(x,y) from +/-0.015 to +/-0.01
FCN#
FCN20070432
Revision History
Date
Change Description
Data is subject to change without prior notice; please refer to COTCO Website for the latest version.
[email protected] Cotco International Ltd.
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.
CLD-CT124.000
5/5
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Format #: COTCO-D-074 REV.4
Mechanical Dimensions
Document No. SPE/LP377PWN1-60G
Rev. No.
04
All dimensions are in mm. Tolerance is ±0.25 mm unless otherwise noted.
An epoxy meniscus may extend about 1.5 mm down the leads.
Dimension Drawing
Burr around bottom of epoxy may be 0.5 mm max.
= 25°C
Absolute maximum
Rating
Unit
30
mA
100
mA
5
V
132
mW
-40 ~ +95
°C
-40 ~ +100
°C
Max.260°C for 3 sec Max.
mm from the base of the epoxy bulb)
Notes
cteristics ( Ta = 25°C)
RoHS Compliance
The levels of environmentally sensitive, persistent biologically toxic (PBT), persistent organic pollutants (POP), or
otherwise restricted materials in this product are below the maximum concentration values (also referred to as the
Condition
Min.for such substances,
Typ. or are usedMax.
Unit
threshold
limits) permitted
in an exempted application,
in accordance with EU Directive 2002/95/EC on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(RoHS), as amended through April 21, 2006.
IF = 30mA
---
3.6
4.4
V
VR = 5V
---
---
100
PA
IF = 30mA
770
1800
---
mcd
Vision Advisory Claim
Users should be cautioned not to stare at the light of this LED product. The bright light can damage the eye.
IF = 30mA
--2000
--mlm
Copyright
© 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.
CLD-CT124.000
IF = 30mA
---
0.31
---
---
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps
Kit Number System
Cree LED lamps are tested and sorted into performance bins. A bin is specified by ranges of color, forward voltage,
and brightness. Sorted LEDs are packaged for shipping in various convenient options. Please refer to the “Cree LED
Lamp Packaging Standard” document for more information about shipping and packaging options.
Cree LEDs are sold by order codes in combinations of bins called kits. Order codes are configured in the following
manner:
Standard/Custom
0: Standard
C: Custom
VF
0: Full forward voltage distribution
1~9, A~Z . . . : special request *
Wd/Color
1: Full-color distribution
2~9, A~Z . . . : special request *
aaaaaaaaa-aaa-aa- x x x x x
IV
0: Full luminous intensity distribution
1~9, A~Z . . . : special request *
Packing type
0: Standard = tube pack
1~9, A~Z . . . : special request *
Product P/N
* Contact your Cree sales representative for ordering information.
Standard Available Kits*
Kit Number
Description
LP377PWN1-60G-00001
P4 60 White, FULL RANK, Tube Pack
LP377PWN1-60G-00002
P4 60 White, A1, A2, B1, B2, Tube Pack
* Please contact your Cree representative about the availability of non-standard kits.
Copyright © 2007 Cree, Inc. All rights reserved. The information in this document is subject to change without notice. Cree and the
Cree logo are registered trademarks of Cree, Inc.
CLD-CT124.000
Cree, Inc.
4600 Silicon Drive
Durham, NC 27703
USA Tel: +1.919.313.5300
Fax: +1.919.313.5778
www.cree.com/ledlamps