ANTENNA PRODUCTS WIDE BAND MULTILAYER CERAMIC ANTENNA FOR 850~950MHz Product Specification QUICK REFERENCE DATA Size 16.5*14*0.9 mm Working Frequency 850~950MHz Gain 1.5 dBi Max VSWR 2 max Polarization Linear Azimuth Omni-directional Impedance 50Ω Operating Temperature -55~85 o C Termination Ni/Sn (Environmentally-Friendly Leadless) o 433MHz Ceramic Antenna 260 C, 10 Chip sec. Resistance to soldering heats Special Environmental Concerns- Green Products Design: The foil making process is using environmentally friendly aqueous solvent technology. Termination is lead free and packing materials can be re-cycled Sep, 2005, V3 Print date 05/09/07 15th, Aug, 05 Multilayer Ceramic Antenna for 433 MHz (small size) CAN4313 129 200431B 30th, Aug,05 7th, Sep,05 Dennis Liu spec.doc C.T.Lee 7th ,Sep, 05 Page 1 sheet 190-1 A4 MULTILAYER CERAMIC ANTENNA (LINEAR POLARIZATION MODE) FOR 400MHz~500MHz Product Specification1 QUICK REFERENCE DATA __________________________________________________________________________ Working Frequency* 400~500MHz Bandwidth 20 MHz (Min) Gain 0.5 dBi (Max) VSWR 3.0 max Polarization Linear Azimuth Omni-directional Impedance 50Ω Operating Temperature -40~85 o C Termination Ni/Sn (Environmentally-Friendly Leadless) o Resistance to soldering heat 260 C, 10 sec. Special Environmental Concerns- Green Products Design: The foil making process is using environmentally friendly aqueous solvent technology. Termination is lead free and packing materials can be re-cycled 1. APPLICATION 1 All the technical data and information contained herein are subject to change without prior notice Print date 05/09/07 15th, Aug, 05 Multilayer Ceramic Antenna for 433 MHz (small size) CAN4313 129 200431B 30th, Aug,05 7th, Sep,05 Dennis Liu spec.doc C.T.Lee 7th ,Sep, 05 Page 2 sheet 190-2 A4 RFModule Top Side 40 50 ohm transmission line 60 mm Back Side Cleanness Circuits space Back side all ground plan ( But under antenna should avoid ground ) plane ) Print date 05/09/07 15th, Aug, 05 Multilayer Ceramic Antenna for 433 MHz (small size) CAN4313 129 200431B 30th, Aug,05 7th, Sep,05 Dennis Liu spec.doc C.T.Lee 7th ,Sep, 05 Page 3 sheet 190-3 A4 2. SOLDER LAND PATTERN FOR ANTENNA Figure Dimensions W Remark w 0.85 ± 0.3 mm Feed Pad F 4.20 ± 0.3 mm Feed Pad F 1 Print date 05/09/07 15th, Aug, 05 Multilayer Ceramic Antenna for 433 MHz (small size) CAN4313 129 200431B 30th, Aug,05 7th, Sep,05 Dennis Liu spec.doc C.T.Lee 7th ,Sep, 05 Page 4 sheet 190-4 A4 3. MECHANICAL DATA Figure Dimension L Port W 4±0.5mm Feed termination L 12±0.5mm Solder termination T 1.5±0.3mm W 1 T 4. TEST BOARD DIMENSION FOR S11 (RETURN LOSS) AND RADIATION PATTERN MEASURNMENT 60 mm 40 50 ohm transmission FR-4 PCB thickness = 0.8 mm The length of transmission line = 60 mm ( depends on PCB thickness) Print date 05/09/07 15th, Aug, 05 Multilayer Ceramic Antenna for 433 MHz (small size) CAN4313 129 200431B 30th, Aug,05 7th, Sep,05 Dennis Liu spec.doc C.T.Lee 7th ,Sep, 05 Page 5 sheet 190-5 A4 5. S11 RETURN LOSS Print date 05/09/07 15th, Aug, 05 Multilayer Ceramic Antenna for 433 MHz (small size) CAN4313 129 200431B 30th, Aug,05 7th, Sep,05 Dennis Liu spec.doc C.T.Lee 7th ,Sep, 05 Page 6 sheet 190-6 A4 RELIABILITY DATA (Reference to IEC Specification) IEC IEC 384-10/ CECC 32 100 CLAUSE 6006868-2 TEST METHOD TEST 4.4 Mounting 4.5 4.6.1 Visual inspection and dimension check Antenna 4.8 Adhesion 4.9 Bond strength of plating on end face PROCEDURE REQUIREMENTS The antenna can be mounted on printedcircuit boards or ceramic substrates by applying wave soldering, reflow soldering (including vapour phase soldering) or conductive adhesive Any applicable method using × 10 magnification Central Frequency at 20 oC No visible damage In accordance with specification (no chip off 3 mm) Standard test board in page 4 A force of 5 N applied for 10 s to the line joining the terminations and in a plane parallel to the substrate Mounted in accordance with CECC 32 100, paragraph 4.4 No visible damage Conditions: bending 0.25 mm at a rate of 1mm/s, radius jig. 340 mm,1 mm warp on FR4 board of 90 mm length No visible damage No visible damage Print date 05/09/07 15th, Aug, 05 Multilayer Ceramic Antenna for 433 MHz (small size) CAN4313 129 200431B 30th, Aug,05 7th, Sep,05 Dennis Liu spec.doc C.T.Lee 7th ,Sep, 05 Page 7 sheet 190-7 A4 IEC IEC 384-10/ CECC 32 100 CLAUSE 6006868-2 TEST METHOD 4.10 Tb TEST Resistance to soldering heat PROCEDURE REQUIREMENTS 260 ± 5 °C for 10 ± 0.5 s in a static solder bath The terminations shall be well tinned after recovery and Central Freq. Change ± 6% Resistance to leaching 4.11 Ta Solderability 260 ± 5 °C for 30 ± 1 s in a static solder bath Using visual enlargement of × 10, dissolution of the termination shall not exceed 10% Zero hour test, and test The termination must after storage (20 to 24 be well tinned, at months) in original least 75% is well atmosphere; un-mounted tinned at termination chips completely immersed for 2 ± 0.5 s in 235 ± 5°C. Print date 05/09/07 15th, Aug, 05 Multilayer Ceramic Antenna for 433 MHz (small size) CAN4313 129 200431B 30th, Aug,05 7th, Sep,05 Dennis Liu spec.doc C.T.Lee 7th ,Sep, 05 Page 8 sheet 190-8 A4 ORDERING INFORMATION: The antenna may be ordered by using the ordering code. These code numbers can be determined by the following rules: CAN43 13 1 29 20 043 1B F C M S T A T F. Family Code CAN43 = Antenna C. Packing Type Code 13 = Bulk M. Materials Code 1 = High Frequency Material S. Size Code 29 =12* 4 * 1.5 mm T. Tolerance 20 = 20M Hz Band Width A. Working Frequency 043 = 400~500MHz CAN43 Product CAN43= Antenna 13 Packing type Bulk CAN4311129200431B (Clear Text Code Example) 1 29 20 043 Material Size Type Working Frequency LTCC 29=12*4mm 20= 043=433MHz material 20MHz 1 Quantities 1= 1K pcs B Packing Bulking packing Print date 05/09/07 15th, Aug, 05 Multilayer Ceramic Antenna for 433 MHz (small size) CAN4313 129 200431B 30th, Aug,05 7th, Sep,05 Dennis Liu spec.doc C.T.Lee 7th ,Sep, 05 Page 9 sheet 190-9 A4 Revision Control: Revision Date th Content Remark 1 15 , Aug. 2005 New Issued 2 30th, Aug. 2005 Modification of end-termination’s appearance 3 th 7 , Sep. 2005 Modification of 12nc and packing type Print date 05/09/07 15th, Aug, 05 Multilayer Ceramic Antenna for 433 MHz (small size) CAN4313 129 200431B 30th, Aug,05 7th, Sep,05 Dennis Liu spec.doc C.T.Lee 7th ,Sep, 05 Page 10 sheet 190-10 A4