ETC AOP8

DATA
ACQUISITION CARDS
AOP-8
8 Channel 12 Bit Analogue Output card
This AOP provides 8 analogue outputs in the
range 0-10V, at up to 10mA per channel.
It is designed to drive external devices such as
controllers and motors and can be used where an
analogue control voltage at up to 10mA is
needed.
8 independent analogue outputs
12 Bit resolution
0-10Volts, progammable output
1.5µS settling time
Non-linearity ± 1 bit
Available with DLL for Windows
Options
50 way IDC connector
50 way screw terminal adapter
Technical Specification
1 metre cable with IDC connector
Analogue output channels:
8 independent output
Windows 3.1 DLL driver
Maximum output voltage:
10 V DC
Maximum load current:
10mA DC
Resolution:
12 Bit monotonic
Accuracy:
Non-linearity ± 1 bit
Gain Time:
±6 bit
Settling time:
1.5µS
Data Transfer:
Via I/O port
Power requirement:
5 Volts DC 350mA typical
Height:
107mm
Length:
Connectors:
132mm
50 way male IDC header
3
YEAR
WARRANTY
BS EN ISO 9001
Certificate No 33069
Chowley Oak, Tattenhall, Chester, Cheshire, CH 9EX, UK
Tel: +44 (0) 1829 772000
Facsimile: +44 (0) 1829 772001
E-mail: sales@bluechiptechnology.co.uk
Web: http://www.bluechiptechnology.co.uk
All trademarks and registered trademarks are acknowledged as the property of their respective owners. Specifications are
subject to change without notice. All information is believed to be accurate and reliable however Blue Chip Technology
accept no liability whatsoever for any event or action resulting from its use.