ETC IRGC5B120UB

PD - 94315
IRGC5B120UB
IRGC5B120UB IGBT Die in Wafer Form
Features
•
•
•
•
•
GEN5 Non Punch Through (NPT) Technology
UltraFast
10µs Short Circuit Capability
Square RBSOA
Positive VCE(on) Temperature Coefficient
1200 V
IC(nom) = 5A
VCE(on) typ. = 4.01V @
IC(nom) @ 25°C
UltraFast IGBT
Short Circuit Rated
150mm Wafer
C
Benefits
•
•
•
•
•
Benchmark Efficiency above 20KHz
Optimized for Welding, UPS, and Induction Heating
Rugged with UltraFast Performance
Excellent Current Sharing in Parallel Operation
Qualified for Industrial Market
G
E
Electrical Characteristics ( Wafer Form )
Parameter
VCE (on)
V(BR)CES
VGE(th)
ICES
IGES
Description
Guaranteed (Min/Max)
Collector-to-Emitter Saturation Voltage
2.54V Min., 3.64V Max.
Collector-to-Emitter Breakdown Voltage
1200V Min.
Gate Threshold Voltage
4.4V Min., 6.0V Max.
Zero Gate Voltage Collector Current
5.0 µA Max.
Gate-to-Emitter Leakage Current
± 1.1 µA Max.
Test Conditions
IC = 2.5A, TJ = 25°C, VGE = 15V
TJ = 25°C, ICES = 100µA, VGE = 0V
VGE = VCE , TJ =25°C, IC =125µA
TJ = 25°C, VCE = 1200V
TJ = 25°C, VGE = +/- 20V
Mechanical Data
Norminal Backmetal Composition, Thickness:
Norminal Front Metal Composition, Thickness:
Dimensions:
Wafer Diameter:
Wafer thickness:
Relevant Die Mechanical Dwg. Number
Minimum Street Width
Reject Ink Dot Size
Ink Dot Location
Recommended Storage Environment:
Recommended Die Attach Conditions
Al-Ti-NiV-Ag ( 1kA-1kA-4kA-6kA )
99% Al, 1% Si (4 microns)
0.112" x 0.150"
150mm, with std. < 100 > flat
185 +/- 15 Microns
01-5428
100 Microns
0.25mm Diameter Minimum
Consistent throughout same wafer lot
Store in original container, in dessicated
nitrogen, with no contamination
For optimum electrical results, die attach
temperature should not exceed 300C
Die Outline
2.845
[.112]
1.454
[.057]
NOTES:
1. ALL DIMENSIONS ARE SHOWN IN MILLIMET ERS [INCHES].
2. CONTROLLING DIMENSION: [INCH].
3. LET TER DESIGNAT ION:
3.810
[.150]
0.646
[.025]
S = SOURCE
SK = SOURCE KELVIN
G = GAT E
IS = CURRENT SENS E
E = EMITT ER
4. DIMENSIONAL T OLERANCES:
EMIT TE R
BONDING PADS :
2.325
[.091]
WIDTH
&
LENGTH
< 0.635 T OLERANCE = + /- 0.013
< [.0250] TOLERANCE = + /- [.0005]
> 0.635 T OLERANCE = + /- 0.025
> [.0250] TOLERANCE = + /- [.0010]
G
OVERALL DIE:
0.617
[.024]
< 1.270 T OLERANCE = + /- 0.102
WIDTH
< [.050] T OLE RANCE = + /- [.004]
&
> 1.270 T OLERANCE = + /- 0.203
LENGTH
> [.050] T OLE RANCE = + /- [.008]
10/02/01