66143 Mii QUAD CHANNEL, HERMETIC 20 PIN LCC, OPTICALLY COUPLED ISOLATOR OPTOELECTRONIC PRODUCTS DIVISION Features: Applications: • • • • • • • • • • • High Reliability Base lead provided for conventional transistor biasing Very high gain, high voltage transistor Stability over wide temperature range. +1kVdc electrical isolation Screening available Eliminate ground loops Level shifting Line receiver Switching power supplies Motor control DESCRIPTION The Mii 66143 -002, -003 and -004 are optically coupled isolators, consisting of four GaAlAs LEDs and four silicon phototransistors mounted and coupled in a miniature surface mount hermetic leadless chip carrier. All electrical characteristics of each channel are identical to the JEDEC registered 4N47 (-002), 4N48 (-003) and 4N49 (-004). Each unit contains four channels. These solid state couplers are ideal for designs where board space and device weight are important design considerations. ABSOLUTE MAXIMUM RATINGS Input-to-output Voltage (see Note 1).....................................................................................................................................+1kV Collector-Base Voltage ...........................................................................................................................................................45V Collector-Emitter Voltage (Value applies to emitter-base open-circuited & the input-diode equal to zero) ..........................40V Emitter-Base Voltage ................................................................................................................................................................7V Input Diode Reverse Voltage ...................................................................................................................................................3V Input Diode Continuous Forward Current at (or below) 65°C Free-Air Temperature (see note 2).....................................40mA Input Diode Power Dissipation........................................................................................................................................... 60mW Continuous Collector Current...............................................................................................................................................50mA Continuous Transistor Power Dissipation at (or below) 25°C Free-Air Temperature (see Note 3)................................ 300mW Storage Temperature ........................................................................................................................................ -65°C to +150°C Operating Free-Air Temperature Range............................................................................................................ -55°C to +125°C Lead Solder Temperature (1/16” (1.6mm) from case for 10 seconds)...............................................................................240°C Notes: 1. Measured with Inputs shorted together and outputs shorted together. 2. Derate linearly to 125°C free-air temperature at the rate of 0.67 mA/°C above 65°C. 3. Derate linearly to 125°C free-air temperature at the rate of 3 mW/°C. Package Dimensions 0.350 [8.89] +0.010 [0.25] -.005[0.13] SQ. Schematic Diagram A 8 11 C A 3 6 C K 7 10 E 9 B K 2 5 E 4 B A 13 16 C A 17 1 C K 12 15 E 14 B K 18 20 E 19 B .003 0.066 [1.68] 0.200 [5.08]SQ. 0.240 [6.10]SQ. .002 0.025 [0.64] 0.020 [0.51] .020 X 45° 0.200 [5.08] TYP 0.053 [1.34] .002 0.025 ±.003 0.314 [7.98] ±.004 [0.10] SQ. 0.250 [6.35] ±.006 [0.15] SQ. Mii 66171 XXXXX NO. 1 LEAD 0.075 [1.91] NO. 1 LEAD .040 X 45 ° (3 PL) R0.008 [R0.20]TYP 0.075 [1.91] REF 0.050 [1.27] TYP ALL DIMENSIONS ARE IN INCHES [MILLIMETERS] MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E.Walnut Str., Garland, TX 75040 • (972)272-3571 • Fax (972)487-6918 www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM 66143 SINGLE CHANNEL, 20 PIN LCC, EQUIVALENT TO 4N47, 4N48 and 4N49 ELECTRICAL CHARACTERISTICS TA = 25°C unless otherwise specified. PARAMETER SYMBOL Input Diode Static Reverse Current Input Diode Forward Voltage MIN TYP IR -55°C +25°C +100°C MAX UNITS TEST CONDITIONS NOTE 100 µA VR = 3V 1 1.7 1.5 1.3 V V V IF = 10mA IC = 100µA, IB = 0, IF = 0 VF VF VF 1.0 0.8 0.7 Collector-Base Breakdown Voltage V(BR)CBO 45 V Collector-Emitter Breakdown Voltage V(BR)CEO 40 V IC = 1mA, IB = 0, IF = 0 Emitter-Base Breakdown Voltage V(BR)EBO 7 V IC = 0mA, IE = 100µA, IF = 0 mA mA mA VCE = 5V, IB = 0, IF = 1mA VCE = 5V, IB = 0, IF = 1mA VCE = 5V, IB = 0, IF = 1mA OUTPUT TRANSISTOR TA = 25°C unless otherwise specified. COUPLED CHARACTERISTICS TA = 25°C unless otherwise specified. On State Collector Current Ta = +25°C -002 -003 -004 IC(ON) 0.5 1.0 2.0 5 10 On State Collector Current Ta = -55°C -002 -003 -004 IC(ON) 0.7 1.4 2.8 mA mA mA VCE = 5V, IB = 0, IF = 2mA VCE = 5V, IB = 0, IF = 2mA VCE = 5V, IB = 0, IF = 2mA On State Collector Current Ta = +100°C -002 -003 -004 IC(ON) 0.5 1.0 2.0 mA mA mA VCE = 5V, IB = 0, IF = 2mA VCE = 5V, IB = 0, IF = 2mA VCE = 5V, IB = 0, IF = 2mA On-State Collector Base Current ICB(ON) 30 µA VCB = 5V, IE = 0, IF = 10mA Off State Collector Current IC(OFF) 100 nA VCE = 20V, IB = 0, IF = 0mA 1 Off State Collector Current, Ta = +100°C IC(OFF) 100 µA VCE = 20V, IB = 0, IF = 0mA 1 Collector-Base Dark Current ICB(OFF) 10 nA VCB = 20V, IE = 0, IF = 0 VCE(SAT) VCE(SAT) VCE(SAT) 0.3 0.3 0.3 V V V IF = 2mA, IC = 0.5mA, IB = 0 IF = 2mA, IC = 1mA, IB = 0 IF = 2mA, IC = 2mA, IB = 0 Ω VIN-OUT = 1kV, tw = 100µs, duty cycle < 1% 5 pF F = 1MHz, VIN-OUT = 0 20 20 25 µs Collector-Emitter Saturation Voltage -002 -003 -004 Input to Output Resistance RIO Input to Output Capacitance 11 10 CIO Rise Time (Phototransistor Operation) or Fall Time -002 -003 -004 tr or tf 10 10 10 µs µs VCC = 10V, IF = 5mA, RL = 100Ω Rise Time (Photodiode Operation) tr 0.85 3 or 0.85 3 or VCC = 10V, IF = 5mA, µs Fall Time 0.85 3 tf RL = 100Ω NOTES: 1. Parameter applies to all part numbers. 2. These parameters are measured between all phototransistor leads shorted together and with both input diode leads shorted together. RECOMMENDED OPERATING CONDITIONS: PARAMETER. 2 SYMBOL MIN MAX Input Current, Low Level IFL 0 100 UNITS µA Input Current, High Level IFH 1 10 mA Supply Voltage VCC 5.0 20 V MICROPAC INDUSTRIES, INC. OPTOELECTRONIC PRODUCTS DIVISION • 725 E.Walnut Str., Garland, TX 75040 • (972)272-3571 • Fax (972)487-6918 www.micropac.com E-MAIL: OPTOSALES @ MICROPAC.COM 1