ETC 74ALVC16245MTDX

Revised October 2001
74ALVC16245
Low Voltage 16-Bit Bidirectional Transceiver
with 3.6V Tolerant Inputs and Outputs
General Description
Features
The ALVC16245 contains sixteen non-inverting bidirectional buffers with 3-STATE outputs and is intended for bus
oriented applications. The device is byte controlled. Each
byte has separate 3-STATE control inputs which can be
shorted together for full 16-bit operation. The T/R inputs
determine the direction of data flow through the device.
The OE inputs disable both the A and B ports by placing
them in a high impedance state.
■ 1.65V–3.6V VCC supply operation
The 74ALVC16245 is designed for low voltage (1.65V to
3.6V) VCC applications with I/O compatibility up to 3.6V.
■ Power-down high impedance inputs and outputs
The 74ALVC16245 is fabricated with an advanced CMOS
technology to achieve high speed operation while maintaining low CMOS power dissipation.
■ Uses patented noise/EMI reduction circuitry
■ 3.6V tolerant inputs and outputs
■ tPD
3.0 ns max for 3.0V to 3.6V VCC
3.5 ns max for 2.3V to 2.7V VCC
6.0 ns max for 1.65V to 1.95V VCC
■ Supports live insertion/withdrawal (Note 1)
■ Latchup conforms to JEDEC JED78
■ ESD performance:
Human body model > 2000V
Machine model >200V
■ Also packaged in plastic Fine-Pitch Ball Grid Array
(FBGA) (Preliminary)
Note 1: To ensure the high-impedance state during power up or power
down, OE should be tied to VCC through a pull-up resistor; the minimum
value of the resistor is determined by the current-sourcing capability of the
driver.
Ordering Code:
Order Number
74ALVC16245GX
(Note 2)
Package Number
BGA54A
(Preliminary)
74ALVC16245MTD
(Note 3)
MTD48
Package Description
54-Ball Fine-Pitch Ball Grid Array (FBGA), JEDEC MO-205, 5.5mm Wide
[TAPE and REEL]
48-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 6.1mm Wide
Note 2: BGA package available in Tape and Reel only.
Note 3: Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code.
Logic Symbol
© 2001 Fairchild Semiconductor Corporation
DS500678
www.fairchildsemi.com
74ALVC16245 Low Voltage 16-Bit Bidirectional Transceiver with 3.6V Tolerant Inputs and Outputs
October 2001
74ALVC16245
Connection Diagrams
Pin Descriptions
Pin Assignment of TSSOP
Pin Names
Description
OEn
Output Enable Input (Active LOW)
T/Rn
Transmit/Receive Input
A0–A15
Side A Inputs or 3-STATE Outputs
B0–B15
Side B Inputs or 3-STATE Outputs
NC
No Connect
FBGA Pin Assignments
1
2
3
4
5
6
A
B0
NC
T/R1
OE1
NC
A0
B
B2
B1
NC
NC
A1
A2
C
B4
B3
VCC
VCC
A3
A4
D
B6
B5
GND
GND
A5
A6
E
B8
B7
GND
GND
A7
A8
F
B10
B9
GND
GND
A9
A10
A12
G
B12
B11
VCC
VCC
A11
H
B14
B13
NC
NC
A13
A14
J
B15
NC
T/R2
OE2
NC
A15
Truth Tables
Pin Assignment for FBGA
Inputs
T/R1
OE1
Outputs
L
L
L
H
Bus B0–B7 Data to Bus A0–A7
Bus A0–A7 Data to Bus B0–B7
H
X
HIGH Z State on A0–A7, B0–B7
Inputs
OE2
Outputs
L
L
L
H
Bus B8–B15 Data to Bus A8–A15
Bus A8–A15 Data to Bus B8–B15
H
X
HIGH Z State on A8–A15, B8–B15
H = HIGH Voltage Level
L = LOW Voltage Level
X = Immaterial (HIGH or LOW, inputs and I/O’s may not float)
Z = High Impedance
(Top Thru View)
Logic Diagram
www.fairchildsemi.com
T/R2
2
Recommended Operating
Conditions (Note 6)
−0.5V to +4.6V
Supply Voltage (VCC)
−0.5V to 4.6V
DC Input Voltage (VI)
Output Voltage (VO) (Note 5)
Power Supply
−0.5V to VCC +0.5V
Operating
DC Input Diode Current (IIK)
VI < 0V
−50 mA
0V to VCC
Output Voltage (VO)
DC Output Diode Current (IOK)
0V to VCC
Free Air Operating Temperature (TA)
VO < 0V
−50 mA
−40°C to +85°C
Minimum Input Edge Rate (∆t/∆V)
VIN = 0.8V to 2.0V, VCC = 3.0V
DC Output Source/Sink Current
±50 mA
(IOH/IOL)
±100 mA
Supply Pin (ICC or GND)
10 ns/V
Note 4: The Absolute Maximum Ratings are those values beyond which
the safety of the device cannot be guaranteed. The device should not be
operated at these limits. The parametric values defined in the Electrical
Characteristics tables are not guaranteed at the Absolute Maximum Ratings. The “Recommended Operating Conditions” table will define the conditions for actual device operation.
DC VCC or GND Current per
Storage Temperature Range (TSTG)
1.65V to 3.6V
Input Voltage
−65°C to +150°C
Note 5: IO Absolute Maximum Rating must be observed.
Note 6: Floating or unused control inputs must be held HIGH or LOW.
DC Electrical Characteristics
Symbol
VIH
VIL
VOH
VOL
Parameter
Conditions
HIGH Level Input Voltage
LOW Level Input Voltage
HIGH Level Output Voltage
LOW Level Output Voltage
IOH = −100 µA
VCC
(V)
Min
1.65 - 1.95
0.65 x VCC
2.3 - 2.7
1.7
2.7 - 3.6
2.0
Max
V
1.65 - 1.95
0.35 x VCC
2.3 - 2.7
0.7
2.7 - 3.6
0.8
1.65 - 3.6
V
VCC - 0.2
IOH = −4 mA
1.65
1.2
IOH = −6 mA
2.3
2.0
IOH = −12 mA
2.3
1.7
2.7
2.2
V
3.0
2.4
IOH = −24 mA
3.0
2
IOL = 100 µA
1.65 - 3.6
0.2
1.65
0.45
IOL = 4 mA
Units
IOL = 6 mA
2.3
0.4
IOL = 12 mA
2.3
0.7
2.7
0.4
IOL = 24 mA
3.0
0.55
V
II
Input Leakage Current
0 ≤ VI ≤ 3.6V
3.6
±5.0
µA
IOZ
3-STATE Output Leakage
0 ≤ VO ≤ 3.6V
3.6
±10
µA
ICC
Quiescent Supply Current
VI = V CC or GND, IO = 0
3.6
40
µA
∆ICC
Increase in ICC per Input
VIH = VCC − 0.6V
3 - 3.6
750
µA
3
www.fairchildsemi.com
74ALVC16245
Absolute Maximum Ratings(Note 4)
74ALVC16245
AC Electrical Characteristics
TA = −40°C to +85°C, RL = 500Ω
CL = 50 pF
CL = 30 pF
Units
Symbol
Parameter
Min
Max
Min
Max
Min
Max
Min
Max
tPHL, tPLH
Propagation Delay
1.3
3
1.5
3.5
1.0
3.0
1.5
6.0
ns
tPZL, tPZH
Output Enable Time
1.3
4.3
1.5
5.4
1.0
4.9
1.5
9.3
ns
tPLZ, tPHZ
Output Disable Time
1.3
4.2
1.5
4.7
1.0
4.2
1.5
7.6
ns
VCC = 3.3V ± 0.3V
VCC = 2.7V
VCC = 2.5V ± 0.2V
VCC = 1.8V ± 0.15V
Capacitance
Symbol
Parameter
Conditions
TA = +25°C
VCC
Typical
CIN
Input Capacitance
VI = 0V or VCC
3.3
6
CIO
Input, Output Capacitance
VO = 0V or VCC
3.3
7
CPD
Power Dissipation Capacitance
3.3
20
2.5
20
www.fairchildsemi.com
Outputs Enabled f = 10 MHz, CL = 50 pF
4
Units
pF
pF
pF
TABLE 1. Values for Figure 1
TEST
SWITCH
tPLH, tPHL
Open
tPZL, tPLZ
VL
tPZH, tPHZ
GND
FIGURE 1. AC Test Circuit
TABLE 2. Variable Matrix
(Input Characteristics: f = 1MHz; tr = tf = 2ns; ZO = 50Ω)
Symbol
VCC
3.3V ± 0.3V
2.7V
2.5 ± 0.2V
1.8V ± 0.15V
Vmi
1.5V
1.5V
VCC/2
VCC/2
Vmo
1.5V
1.5V
VCC/2
VCC/2
VX
VOL + 0.3V
VOL + 0.3V
VOL + 0.15V
VOL + 0.15V
VY
VOH − 0.3V
VOH − 0.3V
VOH − 0.15V
VOH − 0.15V
VL
6V
6V
VCC*2
VCC*2
FIGURE 2. Waveform for Inverting and Non-inverting Functions
FIGURE 3. 3-STATE Output High Enable and Disable Times for Low Voltage Logic
FIGURE 4. 3-STATE Output Low Enable and Disable Times for Low Voltage Logic
5
www.fairchildsemi.com
74ALVC16245
AC Loading and Waveforms
74ALVC16245
Physical Dimensions inches (millimeters) unless otherwise noted
54-Ball Fine-Pitch Ball Grid Array (FBGA), JEDEC MO-205, 5.5mm Wide
Package Number BGA54A
www.fairchildsemi.com
6
48-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 6.1mm Wide
Package Number MTD48
Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and
Fairchild reserves the right at any time without notice to change said circuitry and specifications.
LIFE SUPPORT POLICY
FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT
DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD
SEMICONDUCTOR CORPORATION. As used herein:
2. A critical component in any component of a life support
device or system whose failure to perform can be reasonably expected to cause the failure of the life support
device or system, or to affect its safety or effectiveness.
1. Life support devices or systems are devices or systems
which, (a) are intended for surgical implant into the
body, or (b) support or sustain life, and (c) whose failure
to perform when properly used in accordance with
instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the
user.
www.fairchildsemi.com
7
www.fairchildsemi.com
74ALVC16245 Low Voltage 16-Bit Bidirectional Transceiver with 3.6V Tolerant Inputs and Outputs
Physical Dimensions inches (millimeters) unless otherwise noted (Continued)