PANASONIC MA2HD07

Schottky Barrier Diodes (SBD)
MA2HD07
Silicon epitaxial planar type
1.9±0.1
1.85±0.2
2
0.9±0.2
Unit: mm
For high frequency rectification
8°
0.9±0.2
3.2±0.1
• IF(AV) = 1 A rectification is possible
• Half New Mini-power package
3.8±0.2
■ Features
1
■ Absolute Maximum Ratings Ta = 25°C
Symbol
Rating
Unit
VR
30
V
Repetitive peak reverse-voltage
VRRM
30
V
Average forward current
IF(AV)
1
A
Non-repetitive peak forwardsurge-current *
IFSM
25
A
Junction temperature
Tj
125
°C
Storage temperature
Tstg
−40 to +125
°C
8°
1.0±0.2
0 to 0.05
Parameter
Reverse voltage (DC)
0.25+0.1
–0.05
1 : Anode
2 : Cathode
HNMiniP2-J1 Package
Marking Symbol: PQ
Note) *: The peak-to-peak value in one cycle of 50 Hz sine wave (non-repetitive)
■ Electrical Characteristics Ta = 25°C ± 3°C
Parameter
Symbol
Conditions
Min
Typ
Max
Unit
7
mA
Reverse current (DC)
IR
VR = 30 V
Forward voltage (DC)
VF
IF = 1 A
Terminal capacitance
Ct
VR = 10 V, f = 1 MHz
50
pF
Reverse recovery time *
trr
IF = IR = 100 mA
Irr = 10 mA, RL = 100 Ω
15
ns
0.37
V
Note) 1. This product is sensitive to electric shock (static electricity, etc.). Due attention must be paid on the charge of a human body
and the leakage of current from the operating equipment.
2. Rated input/output frequency: 20 MHz
3. *: trr measuring instrument
Input Pulse
Bias Application Unit N-50BU
tp
tr
10%
A
VR
Pulse Generator
(PG-10N)
Rs = 50 Ω
Publication date: August 2001
Wave Form Analyzer
(SAS-8130)
Ri = 50 Ω
SKH00010AED
90%
tp = 2 µs
tr = 0.35 ns
δ = 0.05
Output Pulse
t
IF
trr
t
Irr = 10 mA
IF = 100 mA
IR = 100 mA
RL = 100 Ω
1
MA2HD07
IF  V F
Ta = 125°C
100°C
75°C
10−1
50°C
25°C
10−2
10−3
10−1
10−3
0
0.1
0.2
0.3
0.4
0.5
Forward voltage VF (V)
2
25°C
1
10−2
10−4
10−5
Ta = 50°C
10
Reverse current IR (mA)
Forward current IF (A)
1
IR  V R
102
10
0.6
0
5
10
15
20
25
Reverse voltage VR (V)
SKH00010AED
30
Request for your special attention and precautions in using the technical information
and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the
"Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan.
(2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial
property, the granting of relative rights, or the granting of any license.
(3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances).
Consult our sales staff in advance for information on the following applications:
• Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment,
combustion equipment, life support systems and safety devices) in which exceptional quality and
reliability are required, or if the failure or malfunction of the products may directly jeopardize life or
harm the human body.
• Any applications other than the standard applications intended.
(4) The products and product specifications described in this material are subject to change without
notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to
make sure that the latest specifications satisfy your requirements.
(5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment.
Even when the products are used within the guaranteed values, redundant design is recommended,
so that such equipment may not violate relevant laws or regulations because of the function of our
products.
(6) When using products for which dry packing is required, observe the conditions (including shelf life
and after-unpacking standby time) agreed upon when specification sheets are individually exchanged.
(7) No part of this material may be reprinted or reproduced by any means without written permission
from our company.
Please read the following notes before using the datasheets
A. These materials are intended as a reference to assist customers with the selection of Panasonic
semiconductor products best suited to their applications.
Due to modification or other reasons, any information contained in this material, such as available
product types, technical data, and so on, is subject to change without notice.
Customers are advised to contact our semiconductor sales office and obtain the latest information
before starting precise technical research and/or purchasing activities.
B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but
there is always the possibility that further rectifications will be required in the future. Therefore,
Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material.
C. These materials are solely intended for a customer's individual use.
Therefore, without the prior written approval of Panasonic, any other use such as reproducing,
selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited.
2001 MAR