MCR72−3, MCR72−6, MCR72−8 Preferred Device Sensitive Gate Silicon Controlled Rectifiers Reverse Blocking Thyristors Designed for industrial and consumer applications such as temperature, light and speed control; process and remote controls; warning systems; capacitive discharge circuits and MPU interface. http://onsemi.com SCRs 8 AMPERES RMS 100 thru 600 VOLTS Features • Center Gate Geometry for Uniform Current Density • All Diffused and Glass-Passivated Junctions for Parameter Uniformity and Stability • Small, Rugged Thermowatt Construction for Low Thermal • • G A Resistance, High Heat Dissipation and Durability Low Trigger Currents, 200 mA Maximum for Direct Driving from Integrated Circuits Pb−Free Packages are Available* K MAXIMUM RATINGS (TJ = 25°C unless otherwise noted) Rating Symbol Peak Repetitive Off−State Voltage (Note 1) (TJ = *40 to 110°C, Sine Wave, 50 to 60 Hz, Gate Open) MCR72−3 MCR72−6 MCR72−8 VDRM, VRRM On-State RMS Current (180° Conduction Angles; TC = 83°C) IT(RMS) 8.0 A ITSM 100 A I2t 40 A2s Forward Peak Gate Voltage (t ≤ 10 ms, TC = 83°C) VGM "5.0 V Forward Peak Gate Current (t ≤ 10 ms, TC = 83°C) IGM 1.0 A Forward Peak Gate Power (t ≤ 10 ms, TC = 83°C) PGM 5.0 W PG(AV) 0.75 W TJ −40 to +110 °C Tstg −40 to +150 − 8.0 Peak Non-Repetitive Surge Current (1/2 Cycle, 60 Hz, TJ = 110°C) Circuit Fusing Considerations (t = 8.3 ms) Average Gate Power (t = 8.3 ms, TC = 83°C) Operating Junction Temperature Range Storage Temperature Range Mounting Torque Value Unit V 100 400 600 1 TO−220AB CASE 221A−09 STYLE 3 1 2 3 PIN ASSIGNMENT °C 1 Cathode in. lb. 2 Anode 3 Gate 4 Anode *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. December, 2005 − Rev. 3 3 1 Maximum ratings are those values beyond which device damage can occur. Maximum ratings applied to the device are individual stress limit values (not normal operating conditions) and are not valid simultaneously. If these limits are exceeded, device functional operation is not implied, damage may occur and reliability may be affected. 1. VDRM and VRRM for all types can be applied on a continuous basis. Ratings apply for zero or negative gate voltage; however, positive gate voltage shall not be applied concurrent with negative potential on the anode. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded. © Semiconductor Components Industries, LLC, 20005 2 TO−220AB CASE 221A−07 STYLE 3 MARKING AND ORDERING INFORMATION See detailed marking, ordering, and shipping information in the package dimensions section on page 4 of this data sheet. Preferred devices are recommended choices for future use and best overall value. Publication Order Number: MCR72/D MCR72−3, MCR72−6, MCR72−8 THERMAL CHARACTERISTICS Symbol Max Unit Thermal Resistance, Junction−to−Case Characteristic RqJC 2.2 °C/W Thermal Resistance, Junction−to−Ambient RqJA 60 °C/W TL 260 °C Maximum Lead Temperature for Soldering Purposes 1/8″ from Case for 10 Secs ELECTRICAL CHARACTERISTICS (TC = 25°C unless otherwise noted.) Characteristic Symbol Min Typ Max Unit − − − − 10 500 mA mA ICCH 4 4 mA mA Peak Forward On-State Voltage (ITM = 16 A Peak, Pulse Width p 1 ms, Duty Cycle p 2%) VTM − 1.7 2.0 V Gate Trigger Current (Continuous dc) (Note 3) (VD = 12 V, RL = 100 W) IGT − 30 200 mA Gate Trigger Voltage (Continuous dc) (Note 3) (VD = 12 V, RL = 100 W) VGT − 0.5 1.5 V Gate Non−Trigger Voltage (VD = 12 Vdc, RL = 100 W, TJ = 110°C) VGD 0.1 − − V Holding Current (VD = 12 V, Initiating Current = 200 mA, Gate Open) IH − − 6.0 mA Gate Controlled Turn-On Time (VD = Rated VDRM, ITM = 16 A, IG = 2 mA) tgt − 1.0 − ms dv/dt − 10 − V/ms OFF CHARACTERISTICS Peak Repetitive Forward or Reverse Blocking Current (Note 2) (VAK = Rated VDRM or VRRM; RGK = 1 kW) IDRM, IRRM TJ = 25°C TJ = 110°C High Logic Level Supply Current from VCC ON CHARACTERISTICS DYNAMIC CHARACTERISTICS Critical Rate-of-Rise of Off-State Voltage (VD = Rated VDRM, RGK = 1 kW, TJ = 110°C, Exponential Waveform) 2. Ratings apply for negative gate voltage or RGK = 1 kW. Devices shall not have a positive gate voltage concurrently with a negative voltage on the anode. Devices should not be tested with a constant current source for forward and reverse blocking capability such that the voltage applied exceeds the rated blocking voltage. 3. RGK current not included in measurement. http://onsemi.com 2 MCR72−3, MCR72−6, MCR72−8 Voltage Current Characteristic of SCR + Current Anode + VTM Symbol Parameter VDRM Peak Repetitive Off State Forward Voltage IDRM Peak Forward Blocking Current VRRM Peak Repetitive Off State Reverse Voltage IRRM Peak Reverse Blocking Current VTM Peak On State Voltage IH Holding Current on state IH IRRM at VRRM Reverse Blocking Region (off state) Reverse Avalanche Region + Voltage IDRM at VDRM Forward Blocking Region (off state) P, AV AVERAGE POWER DISSIPATION (WATTS) Anode − ° T C , MAXIMUM CASE TEMPERATURE (C) 110 100 α α = Conduction Angle α = 30° 90 60° 90° 180° 80 dc 70 0 2.0 4.0 6.0 16 dc 12 α 180° α = Conduction Angle 8.0 90° α = 30° 60° 4.0 0 8.0 0 2.0 4.0 6.0 8.0 IT(AV), AVERAGE ON-STATE CURRENT (AMP) IT(AV), AVERAGE ON-STATE CURRENT (AMP) Figure 1. Average Current Derating Figure 2. On−State Power Dissipation VGT , GATE TRIGGER VOLTAGE (VOLTS) NORMALIZED GATE CURRENT 3.0 2.0 VD = 12 Vdc 1.0 0.5 0.3 −40 −20 0 20 40 60 80 90 100 TJ, JUNCTION TEMPERATURE (°C) 120 140 0.7 0.6 VD = 12 Vdc 0.5 0.4 0.3 0.2 0.1 −60 Figure 3. Normalized Gate Current −40 −20 0 20 40 60 80 100 TJ, JUNCTION TEMPERATURE (°C) Figure 4. Gate Voltage http://onsemi.com 3 120 MCR72−3, MCR72−6, MCR72−8 MARKING DIAGRAMS TO−220AB CASE 221A−07 TO−220AB CASE 221A−09 AY WW MCR72−xG AKA AY WW MCR72−6TG AKA A Y WW MCR72−x G AKA = = = = Assembly Location Year Work Week Device Code x = 3, 6, 8, or 8T = Pb−Free Package = Diode Polarity A Y WW MCR72−6T G AKA = Assembly Location = Year = Work Week = Device Code = Pb−Free Package = Diode Polarity ORDERING INFORMATION Device Package MCR72−3 TO−220AB MCR72−3G TO−220AB (Pb−Free) MCR72−6 TO−220AB MCR72−6G TO−220AB (Pb−Free) MCR72−6T TO−220AB MCR72−6TG TO−220AB (Pb−Free) MCR72−8 TO−220AB MCR72−8G TO−220AB (Pb−Free) MCR72−8T TO−220AB MCR72−8TG TO−220AB (Pb−Free) http://onsemi.com 4 Shipping 500 Units / Box 50 Units / Rail 500 Units / Box 50 Units / Rail MCR72−3, MCR72−6, MCR72−8 PACKAGE DIMENSIONS TO−220AB CASE 221A−07 ISSUE AA −T− B F SEATING PLANE C T S 4 Q A 1 2 3 U H K Z R L V J G D N NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. DIM A B C D F G H J K L N Q R S T U V Z INCHES MIN MAX 0.570 0.620 0.380 0.405 0.160 0.190 0.025 0.035 0.142 0.147 0.095 0.105 0.110 0.155 0.014 0.022 0.500 0.562 0.045 0.060 0.190 0.210 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 0.045 −−− −−− 0.080 STYLE 3: PIN 1. 2. 3. 4. MILLIMETERS MIN MAX 14.48 15.75 9.66 10.28 4.07 4.82 0.64 0.88 3.61 3.73 2.42 2.66 2.80 3.93 0.36 0.55 12.70 14.27 1.15 1.52 4.83 5.33 2.54 3.04 2.04 2.79 1.15 1.39 5.97 6.47 0.00 1.27 1.15 −−− −−− 2.04 CATHODE ANODE GATE ANODE TO−220AB CASE 221A−09 ISSUE AA −T− B SEATING PLANE C F T S 4 DIM A B C D F G H J K L N Q R S T U V Z A Q 1 2 3 U H K Z L R V NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. J G D N INCHES MIN MAX 0.570 0.620 0.380 0.405 0.160 0.190 0.025 0.035 0.142 0.147 0.095 0.105 0.110 0.155 0.018 0.025 0.500 0.562 0.045 0.060 0.190 0.210 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 0.045 −−− −−− 0.080 STYLE 3: PIN 1. 2. 3. 4. http://onsemi.com 5 CATHODE ANODE GATE ANODE MILLIMETERS MIN MAX 14.48 15.75 9.66 10.28 4.07 4.82 0.64 0.88 3.61 3.73 2.42 2.66 2.80 3.93 0.46 0.64 12.70 14.27 1.15 1.52 4.83 5.33 2.54 3.04 2.04 2.79 1.15 1.39 5.97 6.47 0.00 1.27 1.15 −−− −−− 2.04 MCR72−3, MCR72−6, MCR72−8 ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: N. American Technical Support: 800−282−9855 Toll Free Literature Distribution Center for ON Semiconductor USA/Canada P.O. Box 61312, Phoenix, Arizona 85082−1312 USA Phone: 480−829−7710 or 800−344−3860 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2−9−1 Kamimeguro, Meguro−ku, Tokyo, Japan 153−0051 Fax: 480−829−7709 or 800−344−3867 Toll Free USA/Canada Phone: 81−3−5773−3850 Email: [email protected] http://onsemi.com 6 ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative. MCR72/D