Model MM4xSMx-10 Model MM4xSMx-14 Double Balanced Mixer Multi-Octave Band : Conditions RF(GHz) 2.0-8.0 2.0-8.0 2.0-8.0 Parameter SSB Conversion loss:(2) (3) Isolation LO to RF: LO to IF: RF to IF: Input 1-dB Compression Point: IF(MHz) DC-500 DC-1000 DC-1500 Min 2.0-8.0 2.0-8.0 Input Third Order Intercept Point: LO Power: LO(GHz) 2.0-8.0 2.0-8.0 2.0-8.0 Specifications (4) 2.0-8.0 2.0-8.0 2.0-8.0 DC-1500 2.0-8.0 2.0-8.0 DC-1500 2.0-8.0 2.0-8.0 DC-1500 Typical 5.0 dB 6.0 dB 7.0 dB 33 dB 37 dB 22 dB +1 dBm +4 dBm +8 dBm +12 dBm +11 dBm +14 dBm +18 dBm +22 dBm +7 dBm +10 dBm +13 dBm +18 dBm Notes: 1. Specifications are guaranteed when tested as a downconverter in a 50 Ohm system at +25˚C with the nominal LO power. Specifications indicated as typical are not guaranteed. Noise figure is typically within ±0.5 dB of conversion loss for IF frequencies greater than 10 MHz. Conversion loss typically degrades less than 0.5 dB at +100˚C and improves less than 0.5 dB at -55˚C. Usable LO drives are up to 2 dB below and 3 dB above nominal. See Application Note M112, for aid in selecting the outline and for mounting and installation information. 2. 3. 4. 5. MM4xSMD-10 MM4xSMx-10: AS SHOWN MM4xSMx-14: RF & LO REVERSED MM4xSMH-10 Outline: SMMC5A: AS SHOWN SMMC5B: RF & LO REVERSED Max 7.0 dB 8.0 dB 9.5 dB LO Power 3 = +7 dBm 4 = +10 dBm 6 = +13 dBm 7 = +18 dBm D = No Cover H = With Cover MM43 MM44 MM46 MM47 MM43 MM44 MM46 MM47 MM43 MM44 MM46 MM47 Typical Performance at 25˚C Mixers Electrical Specifications RF 2.0 to 8.0 GHz (1) Outline: SMMT5A: AS SHOWN SMMT5B: RF & LO REVERSED ECTRU MICROWAVE INC. M SP NOTE: See PC board footprint - FP2 on page 3-64 All dimensions are in inches and [mm]. A Spectrum Control Business SPECTRUM MICROWAVE • 2144 Franklin Drive N.E. • Palm Bay, Florida 32905 • Phone: (888) 553-7531 • Fax: (888) 553-7532 www.specwave.com SPECTRUM CONTROL GmbH • Hansastrasse 6 • 91126 Schwabach, Germany • Phone: (49)-9122-795-0 • Fax: (49)-9122-795-58 609