Oscilent Corporation RF SAW Filter | 802-RF942.5M-B Page 1 of 2 RF SAW Filter Part Number Package Application Last Modified 802-RF942.5M-B 3.0 x 3.0 SMD EGSM Apr. 12 2003 . TYPE : 942.5 MHz RF SAW Filter PART NUMBER : 802-RF942.5M-B . OPERATING CONDITIONS / ELECTRICAL CHARACTERISTICS PARAMETERS Condition Minimum Typical Maximum Units - - 942.5 - MHz 925.0 ~ 960.0 MHz - 2.5 3.0 dB DC Voltage - - - 0 V Input Power - - - 10 dBm Operating Temperature - -30 - +85 °C Storage Temperature - -40 - +85 °C 925.0 ~ 960.0 MHz - 1.25 1.5 dB DC ~ 905.0MHz 17.0 23.0 - dB 905.0 ~ 915.0 MHz 5.0 15.0 - 980.0 ~ 1000.0 MHz 13.0 35.0 - 1000.0 ~ 2000.0 MHz 20.0 25.0 - 925.0 ~ 960.0 MHz - 1.95 2.7 - - - 50 - ohm Center Frequency Insertion Loss Ripple Stopband Attenuation VSWR Teminating Impedance * Maximum Rating (Ta=25°C) ** Custom SAW RF Filters available. Contact Oscilent for assistance. . Pin Layout A Ground B Output C Ground D Ground E Input F Ground Frequency Reponse http://www.oscilent.com/spec_pages/rf_sawfilter/rf_802_rf942_5b.htm 12/28/2005 Oscilent Corporation RF SAW Filter | 802-RF942.5M-B Page 2 of 2 VSWR (S11, S22) Smith Chart Oscilent Corporation - CALL 949.252.0522 17962 Sky Park Circle . Building D . Irvine . CA 92614 . USA Fax: 949.252.0599 . E-Mail: [email protected] Part No.: 802-RF942.5M-B Crystal Oscillators | Quartz Crystal | TCXO | VCXO | IF SAW Filter | RF SAW Filter | Ceramic Resonator Crystal Filter | Ceramic Filter | SAW Filter / SAW Devices | Site Map http://www.oscilent.com/spec_pages/rf_sawfilter/rf_802_rf942_5b.htm 12/28/2005