MICROSEMI APT9F100S

APT9F100B
APT9F100S
1000V, 9A, 1.6Ω Max, trr ≤200ns
N-Channel FREDFET
POWER MOS 8® is a high speed, high voltage N-channel switch-mode power
MOSFET. This 'FREDFET' version has a drain-source (body) diode that has been optimized for high reliability in ZVS phase shifted bridge and other circuits through reduced
trr, soft recovery, and high recovery dv/dt capability. Low gate charge, high gain, and a
greatly reduced ratio of Crss/Ciss result in excellent noise immunity and low switching
loss. The intrinsic gate resistance and capacitance of the poly-silicon gate structure
help control di/dt during switching, resulting in low EMI and reliable paralleling, even
when switching at very high frequency.
TO
-2
47
D3PAK
APT9F100B
APT9F100S
D
Single die FREDFET
G
S
TYPICAL APPLICATIONS
FEATURES
• Fast switching with low EMI
• ZVS phase shifted and other full bridge
• Low trr for high reliability
• Half bridge
• Ultra low Crss for improved noise immunity
• PFC and other boost converter
• Low gate charge
• Buck converter
• Avalanche energy rated
• Single and two switch forward
• RoHS compliant
• Flyback
Absolute Maximum Ratings
Symbol
ID
Parameter
Unit
Ratings
Continuous Drain Current @ TC = 25°C
9
Continuous Drain Current @ TC = 100°C
5
A
IDM
Pulsed Drain Current
VGS
Gate-Source Voltage
±30
V
EAS
Single Pulse Avalanche Energy 2
574
mJ
IAR
Avalanche Current, Repetitive or Non-Repetitive
5
A
1
37
Thermal and Mechanical Characteristics
Characteristic
Min
Typ
Max
Unit
W
PD
Total Power Dissipation @ TC = 25°C
337
RθJC
Junction to Case Thermal Resistance
0.37
RθCS
Case to Sink Thermal Resistance, Flat, Greased Surface
TJ,TSTG
Operating and Storage Junction Temperature Range
TL
Soldering Temperature for 10 Seconds (1.6mm from case)
WT
Package Weight
Torque
Mounting Torque ( TO-247 Package), 6-32 or M3 screw
0.15
-55
150
300
°C/W
°C
0.22
oz
6.2
g
10
in·lbf
1.1
N·m
050-8169 Rev B 05-2009
Symbol
Static Characteristics
TJ = 25°C unless otherwise specified
Symbol
Parameter
Test Conditions
Min
VBR(DSS)
Drain-Source Breakdown Voltage
VGS = 0V, ID = 250μA
1000
∆VBR(DSS)/∆TJ
Drain-Source On Resistance
VGS(th)
Gate-Source Threshold Voltage
∆VGS(th)/∆TJ
VGS = 10V, ID = 5A
3
Zero Gate Voltage Drain Current
IGSS
Gate-Source Leakage Current
Dynamic Characteristics
VDS = 1000V
Forward Transconductance
Ciss
Input Capacitance
Crss
Reverse Transfer Capacitance
Coss
Output Capacitance
Typ
Max
1.15
1.28
4
-10
1.6
5
TJ = 25°C
VGS = 0V
250
1000
±100
TJ = 125°C
VGS = ±30V
Unit
V
V/°C
Ω
V
mV/°C
μA
nA
TJ = 25°C unless otherwise specified
Parameter
gfs
2.5
VGS = VDS, ID = 1mA
Threshold Voltage Temperature Coefficient
IDSS
Symbol
Reference to 25°C, ID = 250μA
Breakdown Voltage Temperature Coefficient
RDS(on)
APT9F100B_S
Min
Test Conditions
VDS = 50V, ID = 5A
VGS = 0V, VDS = 25V
f = 1MHz
Co(cr)
4
Effective Output Capacitance, Charge Related
Co(er)
5
Effective Output Capacitance, Energy Related
Typ
Max
10.0
2606
35
219
Unit
S
pF
85
VGS = 0V, VDS = 0V to 670V
46
Qg
Total Gate Charge
Qgs
Gate-Source Charge
Qgd
Gate-Drain Charge
td(on)
Turn-On Delay Time
Resistive Switching
Current Rise Time
VDD = 670V, ID = 5A
tr
td(off)
tf
Turn-Off Delay Time
80
14
36
25
27
84
24
VGS = 0 to 10V, ID = 5A,
VDS = 500V
RG = 10Ω 6 , VGG = 15V
Current Fall Time
nC
ns
Source-Drain Diode Characteristics
Symbol
IS
ISM
VSD
Parameter
Continuous Source Current
(Body Diode)
Pulsed Source Current
(Body Diode) 1
Diode Forward Voltage
trr
Reverse Recovery Time
Qrr
Reverse Recovery Charge
Irrm
Reverse Recovery Current
dv/dt
Peak Recovery dv/dt
Test Conditions
Min
Typ
D
MOSFET symbol
showing the
integral reverse p-n
junction diode
(body diode)
A
37
S
TJ = 25°C
TJ = 125°C
TJ = 25°C
diSD/dt = 100A/μs
TJ = 125°C
VDD = 100V
TJ = 25°C
Unit
9
G
ISD = 5A, TJ = 25°C, VGS = 0V
ISD = 5A 3
Max
TJ = 125°C
ISD ≤ 5A, di/dt ≤1000A/μs, VDD = 500V,
TJ = 125°C
172
286
.67
1.5
8
11
1.3
200
345
V
ns
μC
A
25
V/ns
1 Repetitive Rating: Pulse width and case temperature limited by maximum junction temperature.
2 Starting at TJ = 25°C, L = 53mH, RG = 25Ω, IAS = 4A.
050-8169 Rev B 05-2009
3 Pulse test: Pulse Width < 380μs, duty cycle < 2%.
4 Co(cr) is defined as a fixed capacitance with the same stored charge as COSS with VDS = 67% of V(BR)DSS.
5 Co(er) is defined as a fixed capacitance with the same stored energy as COSS with VDS = 67% of V(BR)DSS. To calculate Co(er) for any value of
VDS less than V(BR)DSS, use this equation: Co(er) = -3.43E-8/VDS^2 + 1.44E-8/VDS + 5.38E-11.
6 RG is external gate resistance, not including internal gate resistance or gate driver impedance. (MIC4452)
Microsemi reserves the right to change, without notice, the specifications and information contained herein.
APT9F100B_S
30
V
GS
10
= 10V
T = 125°C
J
V
ID, DRIAN CURRENT (A)
ID, DRAIN CURRENT (A)
8
TJ = -55°C
20
15
TJ = 25°C
10
5
0
6
5V
4
2
TJ = 125°C
4.5V
TJ = 150°C
0
0
5
10
15
20
25
30
VDS(ON), DRAIN-TO-SOURCE VOLTAGE (V)
0
3.0
NORMALIZED TO
VGS = 10V @ 5A
2.5
VDS> ID(ON) x RDS(ON) MAX.
250μSEC. PULSE TEST
@ <0.5 % DUTY CYCLE
35
2.0
1.5
1.0
5
10
15
20
25
30
VDS, DRAIN-TO-SOURCE VOLTAGE (V)
Figure 2, Output Characteristics
40
ID, DRAIN CURRENT (A)
RDS(ON), DRAIN-TO-SOURCE ON RESISTANCE
Figure 1, Output Characteristics
0.5
30
25
TJ = -55°C
20
TJ = 25°C
15
TJ = 125°C
10
5
0
0
-55 -25
0
25 50 75 100 125 150
TJ, JUNCTION TEMPERATURE (°C)
Figure 3, RDS(ON) vs Junction Temperature
0
1
2
3
4
5
6
7
8
VGS, GATE-TO-SOURCE VOLTAGE (V)
Figure 4, Transfer Characteristics
4,000
14
12
Ciss
1,000
TJ = -55°C
10
C, CAPACITANCE (pF)
gfs, TRANSCONDUCTANCE
= 6, 7, 8 & 9V
GS
25
TJ = 25°C
8
TJ = 125°C
6
4
100
Coss
Crss
10
2
VGS, GATE-TO-SOURCE VOLTAGE (V)
16
1
2
3
4
5
ID, DRAIN CURRENT (A)
Figure 5, Gain vs Drain Current
200
400
600
800
1000
VDS, DRAIN-TO-SOURCE VOLTAGE (V)
Figure 6, Capacitance vs Drain-to-Source Voltage
12
VDS = 200V
10
VDS = 500V
8
6
VDS = 800V
4
2
0
0
40
ID = 5A
14
0
1
6
20
40
60
80
100
120
Qg, TOTAL GATE CHARGE (nC)
Figure 7, Gate Charge vs Gate-to-Source Voltage
35
30
25
TJ = 25°C
20
TJ = 150°C
15
10
5
0
0
0.3
0.6
0.9
1.2
1.5
VSD, SOURCE-TO-DRAIN VOLTAGE (V)
Figure 8, Reverse Drain Current vs Source-to-Drain Voltage
050-8169 Rev B 05-2009
0
ISD, REVERSE DRAIN CURRENT (A)
0
APT9F100B_S
60
60
IDM
ID, DRAIN CURRENT (A)
ID, DRAIN CURRENT (A)
IDM
10
13μs
100μs
1
1ms
Rds(on)
10ms
0.1
Rds(on)
1
0.1
1ms
10ms
100ms
DC line
Scaling for Different Case & Junction
Temperatures:
ID = ID(T = 25°C)*(TJ - TC)/125
DC line
10
100
1000
VDS, DRAIN-TO-SOURCE VOLTAGE (V)
Figure 9, Forward Safe Operating Area
13μs
100μs
TJ = 150°C
TC = 25°C
100ms
TJ = 125°C
TC = 75°C
1
10
C
1
10
100
1000
VDS, DRAIN-TO-SOURCE VOLTAGE (V)
Figure 10, Maximum Forward Safe Operating Area
D = 0.9
0.35
0.30
0.7
0.25
0.20
0.5
Note:
PDM
ZθJC, THERMAL IMPEDANCE (°C/W)
0.40
0.15
t1
0.3
t2
0.10
t1 = Pulse Duration
SINGLE PULSE
t
Duty Factor D = 1/t2
Peak TJ = PDM x ZθJC + TC
0.1
0.05
0.05
0
10
10-4
10-3
10-2
10-1
RECTANGULAR PULSE DURATION (seconds)
Figure 11. Maximum Effective Transient Thermal Impedance Junction-to-Case vs Pulse Duration
-5
1.0
D3PAK Package Outline
TO-247 (B) Package Outline
15.49 (.610)
16.26 (.640)
Drain
6.15 (.242) BSC
5.38 (.212)
6.20 (.244)
Drain
(Heat Sink)
e1 100% Sn Plated
4.69 (.185)
5.31 (.209)
1.49 (.059)
2.49 (.098)
4.98 (.196)
5.08 (.200)
1.47 (.058)
1.57 (.062)
15.95 (.628)
16.05(.632)
Revised
4/18/95
20.80 (.819)
21.46 (.845)
1.04 (.041)
1.15(.045)
13.79 (.543)
13.99(.551)
13.41 (.528)
13.51(.532)
Revised
8/29/97
11.51 (.453)
11.61 (.457)
3.50 (.138)
3.81 (.150)
0.46 (.018)
0.56 (.022) {3 Plcs}
4.50 (.177) Max.
050-8169 Rev B 05-2009
0.40 (.016)
0.79 (.031)
1.65 (.065)
2.13 (.084)
19.81 (.780)
20.32 (.800)
1.01 (.040)
1.40 (.055)
2.21 (.087)
2.59 (.102)
2.87 (.113)
3.12 (.123)
5.45 (.215) BSC
2-Plcs.
Dimensions in Millimeters and (Inches)
Gate
Drain
Source
0.020 (.001)
0.178 (.007)
2.67 (.105)
2.84 (.112)
1.27 (.050)
1.40 (.055)
1.22 (.048)
1.32 (.052)
1.98 (.078)
2.08 (.082)
5.45 (.215) BSC
{2 Plcs.}
3.81 (.150)
4.06 (.160)
(Base of Lead)
Heat Sink (Drain)
and Leads
are Plated
Source
Drain
Gate
Dimensions in Millimeters (Inches)
Microsemi’s products are covered by one or more of U.S. patents 4,895,810 5,045,903 5,089,434 5,182,234 5,019,522 5,262,336 6,503,786 5,256,583
4,748,103 5,283,202 5,231,474 5,434,095 5,528,058 6,939,743, 7,352,045 5,283,201 5,801,417 5,648,283 7,196,634 6,664,594 7,157,886 6,939,743 7,342,262
and foreign patents. US and Foreign patents pending. All Rights Reserved.