APT9M100B APT9M100S 1000V, 9A, 1.40Ω Max N-Channel MOSFET Power MOS 8™ is a high speed, high voltage N-channel switch-mode power MOSFET. A proprietary planar stripe design yields excellent reliability and manufacturability. Low switching loss is achieved with low input capacitance and ultra low Crss "Miller" capacitance. The intrinsic gate resistance and capacitance of the poly-silicon gate structure help control slew rates during switching, resulting in low EMI and reliable paralleling, even when switching at very high frequency. Reliability in flyback, boost, forward, and other circuits is enhanced by the high avalanche energy capability. TO -24 7 D 3 PAK APT9M100B APT9M100S D Single die MOSFET G S TYPICAL APPLICATIONS FEATURES • Fast switching with low EMI/RFI • PFC and other boost converter • Low RDS(on) • Buck converter • Ultra low Crss for improved noise immunity • Two switch forward (asymmetrical bridge) • Low gate charge • Single switch forward • Avalanche energy rated • Flyback • RoHS compliant • Inverters Absolute Maximum Ratings Symbol ID Parameter Unit Ratings Continuous Drain Current @ TC = 25°C 9 Continuous Drain Current @ TC = 100°C 6 A IDM Pulsed Drain Current VGS Gate-Source Voltage ±30 V EAS Single Pulse Avalanche Energy 2 575 mJ IAR Avalanche Current, Repetitive or Non-Repetitive 5 A 1 37 Thermal and Mechanical Characteristics Typ Max Unit W PD Total Power Dissipation @ TC = 25°C 335 RθJC Junction to Case Thermal Resistance 0.37 RθCS Case to Sink Thermal Resistance, Flat, Greased Surface TJ,TSTG Operating and Storage Junction Temperature Range TL Soldering Temperature for 10 Seconds (1.6mm from case) WT Package Weight Torque Mounting Torque ( TO-247 Package), 6-32 or M3 screw 0.11 -55 150 300 °C/W °C 0.22 oz 6.2 g 10 in·lbf 1.1 N·m 7-2011 Min Rev C Characteristic 050-8108 Symbol Static Characteristics TJ = 25°C unless otherwise specified Symbol Parameter Test Conditions Min VBR(DSS) Drain-Source Breakdown Voltage VGS = 0V, ID = 250μA 1000 ∆VBR(DSS)/∆TJ Drain-Source On Resistance VGS(th) Gate-Source Threshold Voltage ∆VGS(th)/∆TJ VGS = 10V, ID = 5A 3 Zero Gate Voltage Drain Current IGSS Gate-Source Leakage Current Dynamic Characteristics VDS = 1000V VGS = 0V Forward Transconductance Ciss Input Capacitance Crss Reverse Transfer Capacitance Coss Output Capacitance Typ Max 1.15 1.01 4 -10 1.4 5 TJ = 25°C 100 500 ±100 TJ = 125°C VGS = ±30V Unit V V/°C Ω V mV/°C μA nA TJ = 25°C unless otherwise specified Parameter gfs 3 VGS = VDS, ID = 1mA Threshold Voltage Temperature Coefficient IDSS Symbol Reference to 25°C, ID = 250μA Breakdown Voltage Temperature Coefficient RDS(on) APT9M100B_S Min Test Conditions VDS = 50V, ID = 5A VGS = 0V, VDS = 25V f = 1MHz Co(cr) 4 Effective Output Capacitance, Charge Related Co(er) 5 Effective Output Capacitance, Energy Related Typ 10 2605 35 220 Max Unit S pF 90 VGS = 0V, VDS = 0V to 667V 46 Qg Total Gate Charge Qgs Gate-Source Charge Qgd Gate-Drain Charge td(on) Turn-On Delay Time Resistive Switching Current Rise Time VDD = 667V, ID = 5A tr td(off) tf Turn-Off Delay Time 80 14 38 12 11 40 10 VGS = 0 to 10V, ID = 5A, VDS = 500V RG = 4.7Ω 6 , VGG = 15V Current Fall Time nC ns Source-Drain Diode Characteristics Symbol IS ISM Parameter Continuous Source Current (Body Diode) Pulsed Source Current (Body Diode) 1 Test Conditions MOSFET symbol showing the integral reverse p-n junction diode (body diode) Diode Forward Voltage ISD = 5A, TJ = 25°C, VGS = 0V trr Reverse Recovery Time ISD = 5A, VDD = 100V 3 Qrr Reverse Recovery Charge Peak Recovery dv/dt Typ Max Unit 9 A G VSD dv/dt Min D 37 S diSD/dt = 100A/μs, TJ = 25°C ISD ≤ 5A, di/dt ≤1000A/μs, VDD = 667V, TJ = 125°C 1.0 1040 19 V ns μC 10 V/ns 1 Repetitive Rating: Pulse width and case temperature limited by maximum junction temperature. 2 Starting at TJ = 25°C, L = 46.00mH, RG = 4.7Ω, IAS = 5A. 3 Pulse test: Pulse Width < 380μs, duty cycle < 2%. 050-8108 Rev C 7-2011 4 Co(cr) is defined as a fixed capacitance with the same stored charge as COSS with VDS = 67% of V(BR)DSS. 5 Co(er) is defined as a fixed capacitance with the same stored energy as COSS with VDS = 67% of V(BR)DSS. To calculate Co(er) for any value of VDS less than V(BR)DSS, use this equation: Co(er) = -7.56E-8/VDS^2 + 1.33E-8/VDS + 2.58E-11. 6 RG is external gate resistance, not including internal gate resistance or gate driver impedance. (MIC4452) Microsemi reserves the right to change, without notice, the specifications and information contained herein. APT9M100B_S 30 V GS 10 = 10V T = 125°C J V TJ = -55°C ID, DRIAN CURRENT (A) ID, DRAIN CURRENT (A) 8 20 15 TJ = 25°C 10 5 0 6 5V 4 2 TJ = 125°C 4.5V TJ = 150°C 0 0 5 10 15 20 25 30 VDS(ON), DRAIN-TO-SOURCE VOLTAGE (V) 0 3.0 NORMALIZED TO VGS = 10V @ 5A 2.5 VDS> ID(ON) x RDS(ON) MAX. 250μSEC. PULSE TEST @ <0.5 % DUTY CYCLE 35 2.0 1.5 1.0 5 10 15 20 25 30 VDS, DRAIN-TO-SOURCE VOLTAGE (V) Figure 2, Output Characteristics 40 ID, DRAIN CURRENT (A) RDS(ON), DRAIN-TO-SOURCE ON RESISTANCE Figure 1, Output Characteristics 0.5 30 25 TJ = -55°C 20 TJ = 25°C 15 TJ = 125°C 10 5 0 0 -55 -25 0 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (°C) Figure 3, RDS(ON) vs Junction Temperature 0 1 2 3 4 5 6 7 8 VGS, GATE-TO-SOURCE VOLTAGE (V) Figure 4, Transfer Characteristics 4,000 14 12 10 Ciss 1,000 TJ = -55°C C, CAPACITANCE (pF) gfs, TRANSCONDUCTANCE = 6, 7, 8 & 9V GS 25 TJ = 25°C 8 TJ = 125°C 6 4 100 Coss Crss 10 2 2 3 4 5 ID, DRAIN CURRENT (A) Figure 5, Gain vs Drain Current 200 400 600 800 1000 VDS, DRAIN-TO-SOURCE VOLTAGE (V) Figure 6, Capacitance vs Drain-to-Source Voltage VDS = 200V 10 VDS = 500V 6 VDS = 800V 4 2 0 20 40 60 80 100 120 Qg, TOTAL GATE CHARGE (nC) Figure 7, Gate Charge vs Gate-to-Source Voltage 35 30 25 TJ = 25°C 20 TJ = 150°C 15 7-2011 12 8 0 40 ID = 5A 14 0 1 6 10 5 0 0 0.3 0.6 0.9 1.2 1.5 VSD, SOURCE-TO-DRAIN VOLTAGE (V) Figure 8, Reverse Drain Current vs Source-to-Drain Voltage Rev C VGS, GATE-TO-SOURCE VOLTAGE (V) 16 1 050-8108 0 ISD, REVERSE DRAIN CURRENT (A) 0 APT9M100B_S 60 60 IDM ID, DRAIN CURRENT (A) ID, DRAIN CURRENT (A) IDM 10 13μs 100μs 1 1ms Rds(on) 10ms 1 Rds(on) 1 0.1 1ms 10ms 100ms DC line Scaling for Different Case & Junction Temperatures: ID = ID(T = 25°C)*(TJ - TC)/125 DC line 10 100 1000 VDS, DRAIN-TO-SOURCE VOLTAGE (V) Figure 9, Forward Safe Operating Area 13μs 100μs TJ = 150°C TC = 25°C 100ms TJ = 125°C TC = 75°C 0.1 10 C 1 10 100 1000 VDS, DRAIN-TO-SOURCE VOLTAGE (V) Figure 10, Maximum Forward Safe Operating Area 0.35 D = 0.9 0.30 0.7 0.25 0.20 0.5 Note: P DM ZθJC, THERMAL IMPEDANCE (°C/W) 0.40 0.15 t1 0.3 t2 0.10 t1 = Pulse Duration SINGLE PULSE t Duty Factor D = 1 /t2 Peak T J = P DM x Z θJC + T C 0.1 0.05 0.05 0 10 10-4 10-3 10-2 10-1 RECTANGULAR PULSE DURATION (seconds) Figure 11. Maximum Effective Transient Thermal Impedance Junction-to-Case vs Pulse Duration -5 D3PAK Package Outline TO-247 (B) Package Outline e3 100% Sn Plated 15.49 (.610) 16.26 (.640) Drai n 6.15 (.242) BSC 5.38 (.212) 6.20 (.244) Drai n (Heat Sink) e1 SAC: Tin, Silver, Copper 4.69 (.185) 5.31 (.209) 1.49 (.059) 2.49 (.098) 1.0 4.98 (.196) 5.08 (.200) 1.47 (.058) 1.57 (.062) 15.95 (.628) 16.05(.632) Revised 4/18/95 20.80 (.819) 21.46 (.845) 1.04 (.041) 1.15(.045) 13.79 (.543) 13.99(.551) 13.41 (.528) 13.51(.532) Revised 8/29/97 11.51 (.453) 11.61 (.457) 3.50 (.138) 3.81 (.150) 0.46 (.018) 0.56 (.022) {3 Plcs} 050-8108 Rev C 7-2011 4.50 (.177) Max. 0.40 (.016) 1.016 (.040) 1.65 (.065) 2.13 (.084) 19.81 (.780) 20.32 (.800) 1.01 (.040) 1.40 (.055) 2.21 (.087) 2.59 (.102) 2.87 (.113) 3.12 (.123) 5.45 (.215) BSC 2-Plcs. Dimensions in Millimeters (Inches) Gate Drai n Source 0.020 (.001) 0.178 (.007) 2.67 (.105) 2.84 (.112) 1.27 (.050) 1.40 (.055) 1.22 (.048) 1.32 (.052) 1.98 (.078) 2.08 (.082) 5.45 (.215) BSC {2 Plcs. } Source Drain Gate Dimensions in Millimeters (Inches) 3.81 (.150) 4.06 (.160) (Base of Lead) Heat Sink (Drain) and Leads are Plated