FEATURES PCB MOUNTING LEDs - Ø 2mm 101 SERIES l Material conforms to UL94 V-O flammability ratings PACK QUANTITY = 250 PIECES l Side stackable on 2.54mm centres l Sub miniature size saves space l Reverse polarity options available l Product illustrated 101-214-20 l Typically available ex stock SPECIFICATIONS Ordering Information & Typical Technical Characteristics (Ta = 25°C) Mean Time Between Failure up to = 100,000 Hours. PART NUMBER COLOUR Luminous intensity figures refer to the unmodified discrete LED. LENS VOLTAGE DC Vopr CURRENT DC lopr LUMINOUS INTENSITY lv@20mA WAVE OPERATING STORAGE LENGTH TEMP TEMP 627 -55 ~ +100^ -55 ~ +100 λp Topr Tstg STANDARD INTENSITY 101-205-02 Red Colour Diffused 1.8 10 10 Yes 101-211-02 Yellow Colour Diffused 2.0 10 9 590 -55 ~ +100^ -55 ~ +100 Yes 101-214-02 Green Colour Diffused 2.1 10 7 565 -40 ~ +100^ -55 ~ +100 Yes 101-205-20 Red Colour Diffused 5 10 10 635 -55 ~ +100^ -55 ~ +100 Yes 101-211-20 Yellow Colour Diffused 5 10 9 583 -55 ~ +100^ -55 ~ +100 Yes 101-214-20 Green Colour Diffused 5 10 7 565 -40 ~ +100^ -55 ~ +100 Yes Vdc mA mcd nm 0 UNITS C C 0 ^ = Products must be derated according to the derating information. Each derating graph refers to specific LEDs. How to Order: website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2008 : DS 056/07 Issue 3 SAMPLES AVAILABLE BS EN ISO 9001:2000 Approved Manufacturer Page 1 of 3 101 Series 5.3 3.0 typ 0.6 3.2 6.4 7.0 min 5.3 3.2 0.6 2.5 Ø 0.5 Voltage Style 0.5 x 0.2 0.8 0.8 2.54 Voltage Dimensions in mm (Typical) Current Version (-20) Not to scale 2.54 Version (-02) Housing Material Polycarbonate This material offers UL94 V-0 flame retardancy* and a high impact strength. This material has a melt point of 290-340°C and is suitable for use in the majority of automatic soldering processes. *Material test thickness 1.6mm LEDs LED Polarity Anode identification is shown in the dimensional diagram. The long lead of a non-cropped unit can also be used to help identify the anode. For the 2 pin Bi-colour units the standard colour configuration is red anode to the ‘+’ sign. Reverse Polarity This is offered on all PCB units, with the exception of the 125 series, if requested to help overcome the problem of systems with reverse polarity connections. Multiple units can also be supplied in reverse polarity but not with mixed polarities. The 2 pin and 3 pin Bi-colours can be supplied in reverse colour configuration. Lead Cropping Should lead cropping be required Marl offer two standard lengths, either by request or by adding one of the following codes to the end of the part number:- -24 = 3mm -26 = 5mm (E.g 101-205-02-26) Other non-standard lead lengths are available on request. Electro-static Discharge (ESD) Build up of electrostatic discharge occurs in many situations involving people moving and handling products. The range of possible situations is very diverse but voltage levels as high as several thousand volts can and do arise in many individual situations. When an operator charged up to these levels handles a ‘static sensitive device’, there is a very probable likelihood that the device will be irreversibly damaged. It is essential that precautions are taken at all stages during manufacture and assembly of these products. Although LEDs were never considered to be static sensitive devices, changes in manufacturing technology and materials used to produce higher intensity products over a large range of the wavelength spectrum have changed this. Marl has an approved system of ESD control from goods in, through production and into final packing and despatch. We recommend all users of LED based products follow the guidelines of BS 100015. Note: All luminous intensity figures refer to the unmodified discrete LED. How to Order: website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2008 : DS 056/07 Issue 3 SAMPLES AVAILABLE BS EN ISO 9001:2000 Approved Manufacturer Page 2 of 3 DERATING INFORMATION 205, 211 & 214 ALSO AVAILABLE Part numbers also available in the 101 Series: PART NO. COLOUR VOLTAGE DC PART NO. COLOUR 101-000-02-52 Green 10mA 101-214-01 Green 101-000-20-50 Red 5/6Vdc 101-214-03 Green 17mA 101-000-20-51 Yellow 5/6Vdc 101-214-04 Green 20mA 101-000-20-52 Green 5/6Vdc 101-214-20-2 Green 5/6Vdc 101-203-20-50 Red 5/6Vdc 101-214-20-50 Green 5/6Vdc 101-205-00-50 Red 2mA 101-224-01 Red 2mA 101-205-01 Red 2mA UNITS 101-205-02-50 Red 10mA 101-205-04 Red 20mA 101-205-20-2 Red 5/6Vdc 101-205-20-25 Red 5/6Vdc 101-205-20-50 Red 5/6Vdc 101-205-21-24 Red 12Vdc 101-205-22 Red 24Vdc 101-205-30 Red 5/6Vdc RP 101-211-00-50 Yellow 5/6Vdc 101-211-01 Yellow 2mA 101-211-02-50 Yellow 10mA 101-211-04 Yellow 20mA 101-211-20-2 Yellow 5/6Vdc 101-211-20-50 Yellow 5/6Vdc 101-211-30 Yellow 5/6Vdc RP 101-214-00-50 Green 5/6Vdc (Vdc) Vopr VOLTAGE DC (Vdc) Vopr 2mA UNITS The products listed above illustrate all of the options available to order. These products may have custom modifications that alter their operation beyond the generic information contained within this datasheet. Please contact sales for further information. How to Order: website: www.marl.co.uk • email: [email protected] • • Telephone +44 (0)1229 582430 • Fax: +44 (0)1229 585155 The information contained in this datasheet does not constitute part of any order or contract and should not be regarded as a representation relating to either products or service. for products or service. Marl International reserve the right to alter without notice the specification or any conditions of supply © MARL INTERNATIONAL LTD 2008 : DS 056/07 Issue 3 SAMPLES AVAILABLE BS EN ISO 9001:2000 Approved Manufacturer Page 3 of 3