Order this document by VN2410L/D SEMICONDUCTOR TECHNICAL DATA N–Channel — Enhancement 3 DRAIN 2 GATE 1 SOURCE MAXIMUM RATINGS Rating Symbol Value Unit Drain – Source Voltage VDSS 240 Vdc Drain – Gate Voltage VDGR 60 Vdc Gate – Source Voltage – Continuous – Non–repetitive (tp ≤ 50 µs) VGS VGSM ± 20 ± 40 Vdc Vpk Continuous Drain Current ID 200 mAdc Pulsed Drain Current IDM 500 mAdc Power Dissipation @ TC = 25°C Derate above 25°C PD 350 2.8 mW mW/°C TJ, Tstg — °C Characteristic Symbol Max Unit Thermal Resistance, Junction to Ambient RθJA 312.5 °C/W Maximum Lead Temperature for Soldering Purposes, 1/16″ from case for 10 seconds TL 300 °C Operating and Storage Temperature 1 2 3 CASE 29–04, STYLE 22 TO–92 (TO–226AA) THERMAL CHARACTERISTICS ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) Characteristic Symbol Min Max Unit V(BR)DSS 240 — Vdc — — 10 500 STATIC CHARACTERISTICS Drain – Source Breakdown Voltage (VGS = 0, ID = 100 µA) µAdc Zero Gate Voltage Drain Current (VDS = 120 Vdc, VGS = 0) (VDS = 120 Vdc, VGS = 0, TA = 125°C) IDSS Gate– Body Leakage (VDS = 0, VGS = ±15 V) IGSS — ±100 nAdc Gate Threshold Voltage (VDS = VGS, ID = 1.0 mA) On–State Drain Current(1) (VGS = 10 V, VDS ≥ 2.0 VDS(on)) VGS(th) 0.8 2.0 Vdc ID(on) 1.0 — Adc Drain–Source On Resistance(1) (VGS = 2.5 V, ID = 0.1 A) (VGS = 10 V, ID = 0.5 A) Forward Transconductance(1) (VDS = 10 V, ID = 0.5 A) rDS(on) — — 10 10 300 — 1. Pulse Test; Pulse Width < 300 µs, Duty Cycle gfs Ω mS v 2.0%. TMOS is a registered trademark of Motorola, Inc. REV 1 Motorola Small–Signal Transistors, FETs and Diodes Device Data Motorola, Inc. 1997 1 VN2410L ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted) (Continued) Characteristic Symbol Min Max Unit Ciss — 125 pF Coss — 50 pF Crss — 20 pF t(on) — 8.0 ns t(r) — 8.0 ns t(off) — 23 ns t(f) — 34 ns DYNAMIC CHARACTERISTICS Input Capacitance Output Capacitance (VDS = 25 Vdc, Vdc VGS = 0, 0 f = 1.0 MHz) Reverse Transfer Capacitance SWITCHING CHARACTERISTICS Turn–On Time (VDD = 60 Vdc, Vdc ID = 0.4 0 4 A, A RL = 150 Ω, RG = 25 Ω) Turn–Off Time 2 Motorola Small–Signal Transistors, FETs and Diodes Device Data VN2410L PACKAGE DIMENSIONS A NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. CONTOUR OF PACKAGE BEYOND DIMENSION R IS UNCONTROLLED. 4. DIMENSION F APPLIES BETWEEN P AND L. DIMENSION D AND J APPLY BETWEEN L AND K MINIMUM. LEAD DIMENSION IS UNCONTROLLED IN P AND BEYOND DIMENSION K MINIMUM. B R P L F SEATING PLANE K D X X G J H V C SECTION X–X 1 N N CASE 029–04 (TO–226AA) ISSUE AD Motorola Small–Signal Transistors, FETs and Diodes Device Data DIM A B C D F G H J K L N P R V INCHES MIN MAX 0.175 0.205 0.170 0.210 0.125 0.165 0.016 0.022 0.016 0.019 0.045 0.055 0.095 0.105 0.015 0.020 0.500 ––– 0.250 ––– 0.080 0.105 ––– 0.100 0.115 ––– 0.135 ––– MILLIMETERS MIN MAX 4.45 5.20 4.32 5.33 3.18 4.19 0.41 0.55 0.41 0.48 1.15 1.39 2.42 2.66 0.39 0.50 12.70 ––– 6.35 ––– 2.04 2.66 ––– 2.54 2.93 ––– 3.43 ––– STYLE 22: PIN 1. SOURCE 2. GATE 3. DRAIN 3 VN2410L Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution; P.O. Box 5405, Denver, Colorado 80217. 303–675–2140 or 1–800–441–2447 JAPAN: Nippon Motorola Ltd.: SPD, Strategic Planning Office, 4–32–1, Nishi–Gotanda, Shinagawa–ku, Tokyo 141, Japan. 81–3–5487–8488 Mfax: [email protected] – TOUCHTONE 602–244–6609 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, – US & Canada ONLY 1–800–774–1848 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298 INTERNET: http://motorola.com/sps 4 ◊ VN2410L/D Motorola Small–Signal Transistors, FETs and Diodes Device Data