AD ADSY8401

LCD Level Shifters with VCOM,
NRS Buffers, and High Voltage Edge Detector
ADSY8401
FEATURES
Complete suite of level shifters
Eight inverting and three complementary level shifters for
LCD timing
High voltage edge detector
Integrated low offset buffer for VCOM drives high capacitive
loads
MUXed input, low offset buffer for 2-level precharge drives
high capacitive loads
High current buffer for precharge provides high current
drive into large capacitive loads
Low power dissipation: 576 mW
Available in 48-lead 7 mm × 7 mm LFCSP E-pad
FUNCTIONAL BLOCK DIAGRAM
DVCC
DI1
DI2
DI3
DI4
DI5
DI6
DI7
DI8
DI9
DI10
DI11
AVCCL
AVCC
ADSY8401
8
8
DO1
DO2
DO3
DO4
DO5
DO6
DO7
DO8
3
DO9T
DO10T
DO11T
3
DO9C
DO10C
DO11C
3
R
PRODUCT DESCRIPTION
The ADSY8401 provides fast, 3 V to 15 V level shifters for LCD
panel timing signals. An integrated low offset analog buffer is
capable of driving the high capacitive loads. A 2:1 MUX input,
low offset buffer simplifies application of 2-level precharge
signals. A high current buffer provides high slew rates for large
capacitive loads.
The ADSY8401 is fabricated on ADI’s fast, 26 V XFHV process,
providing fast input logic, high voltage level shifters, and
precision drive amplifiers on the same chip.
DTCTI
DTCTO
S
+1
AMPO
AMPI
SEL
MUXA
+1
MUXO
MUXB
The ADSY8401 dissipates 576 mW nominal static power.
+1
BFRO
BFRI
GSW
DGND
AGNDL
AGND
04758-0-001
The ADSY8401 is offered in a 48-lead 7 mm × 7 mm LFCSP
E-pad package and operates over the commercial temperature
range of 0°C to 85°C.
Figure 1.
Rev. 0
Information furnished by Analog Devices is believed to be accurate and reliable.
However, no responsibility is assumed by Analog Devices for its use, nor for any
infringements of patents or other rights of third parties that may result from its use.
Specifications subject to change without notice. No license is granted by implication
or otherwise under any patent or patent rights of Analog Devices. Trademarks and
registered trademarks are the property of their respective owners.
One Technology Way, P.O. Box 9106, Norwood, MA 02062-9106, U.S.A.
Tel: 781.329.4700
www.analog.com
Fax: 781.326.8703
© 2004 Analog Devices, Inc. All rights reserved.
ADSY8401
TABLE OF CONTENTS
Specifications..................................................................................... 3
Applications..................................................................................... 11
Absolute Maximum Ratings............................................................ 6
AMP Channel ............................................................................. 11
Maximum Power Dissipation ..................................................... 6
MUX Channel............................................................................. 11
ESD Caution.................................................................................. 6
Driving NRS................................................................................ 11
Pin Configuration and Function Descriptions............................. 7
BFR Channel ............................................................................... 11
Amplifier Applications..................................................................... 8
Grounded Output Mode ........................................................... 11
Amp Section as VCOM Buffer ................................................... 8
Driving VCOM ........................................................................... 11
MUX and BFR Sections as NRS Buffer ..................................... 8
PCB Design for Optimized Thermal Performance ............... 13
MUX Section as VCOM Buffer .................................................. 8
Power Supply Sequencing ......................................................... 14
Level Shifter Characteristics............................................................ 9
Layout Considerations............................................................... 14
Level Shifter Timing Characteristics ......................................... 9
Total Power Dissipation............................................................. 14
Inverting and Complementary Level Shifter Timing .............. 9
Outline Dimensions ....................................................................... 15
Level Shifting Edge Detector Timing Characteristics ........... 10
Ordering Guide .......................................................................... 15
Level Shifting Edge Detector Timing ...................................... 10
REVISION HISTORY
7/04—Revision 0: Initial Version
Rev. 0 | Page 2 of 16
ADSY8401
SPECIFICATIONS
At 25°C, AVCC = AVCCL = 15.5 V, DVCC = 3.3 V, TA min = 0°C, TA max = 85°C, unless otherwise noted.
Table 1.
Parameter
Amp Section
INPUT/OUTPUT CHARACTERISTICS
Voltage Range
VH
VL
Output Voltage Grounded Mode
Input Current
Output Current
Output Offset Voltage
Output Offset Voltage
PSRR
Gain Error
OUTPUT DYNAMIC PERFORMANCE
−3 dB Bandwidth (Small Signal)
Slew Rate
Settling Time to 0.5%
Overshoot
MUX Section
INPUT/OUTPUT CHARACTERISTICS
Voltage Range
VH
VL
Output Voltage Grounded Mode
Input Current
II MUXA, MUXB
Output Current
Output Offset Voltage
Output Offset Voltage
PSRR
Gain Error
SEL INPUT CHARACTERISTICS
IIH SEL
IIL SEL
VTH SEL
VIH SEL
VIL SEL
OUTPUT DYNAMIC PERFORMANCE
−3 dB Bandwidth (Small Signal)
Slew Rate
Settling Time to 0.5%
Overshoot
OUTPUT DYNAMIC PERFORMANCE
−3 dB Bandwidth (Small Signal)
Slew Rate
Settling Time to 0.5%
Overshoot
Conditions
Min
AVCC − VH
VL − AGND
GSW = LOW
VAMPI = 6 V, TA = 25°C
VAMPI = 6 V, TA min to TA max
AVCC ± 10%, TA min to TA max
VAMPI = 3 V to 10 V, TA min to TA max
TA min to TA max, VO = 5 V step, CL = 1 nF
VO = 0.25 V p-p
Typ
Max
Unit
1.5
1.1
45
100
20
1.5
2.5
1.5
V
V
mV
nA
mA
mV
mV
mV/V
%
0.1
0.07
5.2
13
0.5
0.05
TA min to TA max
AVCC − VH
VL − AGND
GSW = LOW
1.5
1.1
45
100
20
1.5
VMUXA, B = 7.5 V, TA = 25°C
VMUXA, B = 7.5 V, TA min to TA max
AVCC ± 10%, TA min to TA max
VMUXA, B 1.5 V to 12 V, TA min to TA max
0.1
0.07
8
11
0.12
1
2.5
1.5
0.12
0.8
µA
µA
V
V
V
8
11
2
TA min to TA max
VO = 5 V step, CL = 15 pF
VO = 0.25 V p-p
TA min to TA max
Rev. 0 | Page 3 of 16
5.2
13
0.5
0.05
27
13
0.4
0.1
V
V
mV
nA
mA
mV
mV
mV/V
%
0.05
−0.7
1.65
VO = 5 V step, CL = 1 nF
VO = 0.25 V p-p
MHz
V/µs
µs
%
1
0.7
MHz
V/µs
µs
%
MHz
V/µs
µs
%
ADSY8401
Parameter
BFR Section
INPUT/OUTPUT CHARACTERISTICS
Voltage Range
VH
VL
Output Voltage Grounded Mode
Input Current
Output Current
Output Offset Voltage
Output Offset Voltage
PSRR, TA min to TA max
Gain Error, TA min to TA max
OUTPUT DYNAMIC PERFORMANCE
−3 dB Bandwidth (Small Signal)
Slew Rate
Settling Time to 0.5%
Overshoot
MUX and BFR Sections as NRS Buffer
Settling Time to 0.5%
Level Shifter Section
LEVEL SHIFTER LOGIC INPUTS
CIN
IIH
IIL
VIH
VIL
VTH
LEVEL SHIFTER OUTPUTS
VOH
VOL
LEVEL SHIFTER DYNAMIC PERFORMANCE
Output Rise, Fall Times, tr, tf
DO1–DO8, DO9T–DO11T, DO9C–DO11C
DO1–DO8
Propagation Delay times, t11, t12, t13, t14
DO1–DO8, DO9T–DO11T, DO9C–DO11C
DO1–DO8
Propagation Delay Skew, t15, t16
DO1–DO8
Propagation Delay Skew, t15, t16, t17, t18
DO1–DO8, DO9T–DO11T, DO9C–DO11C
Conditions
Min
AVCC − VH
VL − AGND
GSW = LOW
BFRI = 7.5 V, TA = 25°C
BFRI = 7.5 V, TA min to TA max
AVCC ± 10%
BFRI = 1.5 V to 12 V
VO = 6 V step, CL = 10 nF
VO = 0.25 V p-p
Typ
Max
Unit
1.5
1.1
90
0.3
100
6
2.5
1.5
V
V
mV
µA
mA
mV
mV
mV/V
%
1
0.5
1.3
12
0.7
0.3
TA min to TA max
See Figure 4
CL = 10 nF
0.9
20
30
0.65
1
1.5
µs
3
pF
µA
µA
V
V
V
0.05
−0.6
2
0.8
1.65
AVCCL − 0.5
TA min to TA max
10% to 90%
CL = 40 pF
CL = 300 pF
CL = 40 pF
CL = 300 pF
CL = 40 pF
MHz
V/µs
µs
%
AVCCL − 0.25
0.25
0.5
V
V
20
130
30
150
ns
ns
23
60
50
80
ns
ns
2
ns
CL = 40 pF
4
Rev. 0 | Page 4 of 16
ns
ADSY8401
Parameter
Level Shifting Edge Detector Section
Input Low Voltage, VIL
Input High Voltage, VIH
Input Rising Edge Threshold Voltage, VTH LH
Input Falling Edge Threshold Voltage, VTH HL
Output High Voltage, VOH
Output Low Voltage, VOL
Input Current High State, IIH
Input Current, IIL
Input Rising Edge Propagation Delay Time, t19
Input Falling Edge Propagation Delay Time, t20
t20 Variation with Temperature, ∆t20
Output Rise, Fall Time, tr
Grounded-Mode Switch
GSW INPUT CHARACTERISTICS
CIN
RIN
IIH
IIL
VIH
VIL
VTH
Power Supplies
Operating Range, DVCC
Quiescent Current, DVCC
Operating Range, AVCC, AVCCL1, 2, 3
Quiescent Current, AVCCL1
Quiescent Current, AVCCL2
Quiescent Current, AVCCL3
Quiescent Current, AVCCL2
Quiescent Current, AVCCL3
Quiescent Current, AVCC
Operating Temperature
Ambient Temperature Range, TA
Conditions
CL = 10 pF
Min
Typ
Max
Unit
AGND + 1.5
V
V
V
V
V
V
µA
µA
ns
ns
ns
ns
AVCC − 1.5
DVCC − 0.5
−2.5
TA = 25°C to 85°C
10% to 90%
AGND + 3
AVCC − 3
DVCC − 0.25
0.25
1.2
−1.2
15.5
16.5
2
6
0.5
2.5
3
50
0.6
−70
2
0.8
1.65
3
12.5
5.2
5.2
11.5
11.5
10
DI1 − DI11 ≤ VIL
DI1 − DI11 ≤ VIL
DI1 − DI11 ≥ VIH
DI1 − DI11 ≥ VIH
In still air
0
Rev. 0 | Page 5 of 16
3.3
20
pF
kΩ
µA
µA
V
V
V
3.6
25
18
15.5
6.6
6.6
14.3
14.3
12.8
V
mA
V
mA
mA
mA
mA
mA
mA
85
°C
ADSY8401
ABSOLUTE MAXIMUM RATINGS
Table 2.
Parameters
Supply Voltages
AVCC to AGND
AVCCL to AGNDL
AGND to AGNDL
AGND to DGND
DVCC to DGND
Input Voltages
Maximum Digital Input Voltages
Minimum Digital Input Voltages
Maximum Analog Input Voltages
Minimum Analog Input Voltages
Internal Power Dissipation1
LFCSP Package at 25°C, Ambient
Operating Temperature Range
Storage Temperature Range
Lead Temperature Range (Soldering 10 s)
1
Stresses above those listed under Absolute Maximum Ratings
may cause permanent damage to the device. This is a stress
rating only and functional operation of the device at these or
any other conditions above those indicated in the operational
section of this specification is not implied. Exposure to absolute
maximum rating conditions for extended periods may affect
device reliability.
Rating
18 V
18 V
±0.5 V
±0.5 V
4.5 V
MAXIMUM POWER DISSIPATION
DVCC + 0.5 V
DGND − 0.5 V
AVCCx + 0.5 V
AGNDx − 0.5 V
3.8 W
0°C to 85°C
−65°C to +125°C
300°C
48-lead LFCSP package:
θJA = 26°C/W (still air): JEDEC STD, 4-layer PCB, 0 CFM airflow
θJC = 20°C/W
ΨJB =11.0°C/W (still air)
ΨJT =0.4°C/W (still air)
Junction Temperature
The maximum power that can be safely dissipated by the
ADSY8401 is limited by its junction temperature. The
maximum safe junction temperature for plastic encapsulated
devices as determined by the glass transition temperature of the
plastic is approximately 150°C. Exceeding this limit temporarily
might cause a shift in the parametric performance due to a
change in the stresses exerted on the die by the package.
Exceeding a junction temperature of 150°C for an extended
period can result in device failure.
Exposed Paddle
The die paddle must be in good thermal contact with at least a
partial plane for proper operation in high ambient temperature
environments. The partial plane must be in good electrical
contact with AVCC or AGND for reliable electrical operation.
See the PCB Design for Optimized Thermal Performance
section for more information on the use of the exposed paddles
to dissipate excess heat.
ESD CAUTION
ESD (electrostatic discharge) sensitive device. Electrostatic charges as high as 4000 V readily accumulate on
the human body and test equipment and can discharge without detection. Although this product features
proprietary ESD protection circuitry, permanent damage may occur on devices subjected to high energy
electrostatic discharges. Therefore, proper ESD precautions are recommended to avoid performance
degradation or loss of functionality.
Rev. 0 | Page 6 of 16
ADSY8401
DTCTI
DGND
DTCTO
AGND
BFRO
AVCC
BFRI
MUXO
MUXB
MUXA
AMPI
AMPO
PIN CONFIGURATION AND FUNCTION DESCRIPTIONS
48
47
46
45
44
43
42
41
40
39
38
37
36
AVCCL3
GSW 2
35
DO1
SEL 3
34
DO2
AGNDL 4
33
DO3
DO9T 5
32
DO4
31
AGNDL
30
AVCCL2
DO10C 8
29
DO5
DO11T 9
28
DO6
DO11C 10
27
DO7
AVCCL1 11
26
DO8
DI11 12
25
AGNDL
13
14
15
16
17
18
19
20
21
22
23
24
DI7
DI6
DVCC
DGND
DI5
DI4
DI3
DI2
DI1
TOP VIEW
(Not to Scale)
DI8
DO10T 7
DI9
ADSY8401
DI10
DO9C 6
04758-0-002
DVCC 1
Figure 2. Pin Configuration
Table 3. Pin Function Descriptions
Pin No.
1, 18
2
Mnemonic
DVCC
GSW
3, 39–41
SEL, MUXA, MUXB,
MUXO
4, 25, 31
5–10
AGNDL
DO9–11T, DO9–11C
11, 30, 36
12–14
15–17,
20–24
19, 47
26–29,
32–35
AVCCL1, 2, 3
DI9–11
DI1–8
37–38
42, 44
43
45
46
48
DGND
DO1-8
AMPO, AMPI
BFRI, BFRO
AVCC
AGND
DTCTO
DTCTI
Description
Digital Power Supply.
Grounded Mode Switch. When the voltage on the GSW pin is tied to DGND, the AMPO, MUXO, and
BFRO outputs are pulled to near AGND. When the GSW input is left unconnected or tied to DVCC, all
outputs operate normally. The level shifters are not affected by the GSW input.
Analog Precharge. Low offset unity gain amplifier with MUXed inputs. Drives large capacitive loads. For
driving large capacitive loads at high slew rates, connect MUXO to BFRI and the load capacitance to
BFRO.
SEL = HIGH selects MUXA.
Level Shifter Ground.
Complementary Level Shifter Outputs. While the corresponding input voltage of these level shifters is
below the threshold voltage, the voltage at the noninverting output pins is at VOL and the voltage at
the inverting outputs is at VOH. While the corresponding input voltage of these level shifters is above
the threshold voltage, the voltage at the noninverting output pins is at VOH and the voltage at the
inverting outputs is at VOL.
Level Shifter Power Supply.
Complementary Level Shifter Inputs. Low voltage input of the complementary level shifters.
Inverting Level Shifter Inputs. Low voltage input of the inverting level shifters.
Digital Ground. This pin is normally connected to the digital ground plane.
Inverting Level Shifter Outputs. While the corresponding input voltage of these level shifters is below
the threshold voltage, the output voltage at these pins is at VOH. While the corresponding input voltage
of these level shifters is above the threshold voltage, the output voltage at these pins is at VOL.
Analog Amplifier. Low offset unity gain amplifier. Drives large capacitive loads such as VCOM.
Analog Buffer. High current output buffer.
Analog Power Supplies. Analog power supplies for the level shifter and the amplifiers.
Analog Supply Returns. Analog supply returns for the level shifter and the amplifiers.
Edge Detecting Level Shifter Output. Logic output of the inverting level shifting edge detector.
Edge Detecting Level Shifter Input. High voltage input of the inverting level shifting edge detector.
Rev. 0 | Page 7 of 16
ADSY8401
AMPLIFIER APPLICATIONS
AMP SECTION AS VCOM BUFFER
AMPO
+1
VCOM
04758-0-003
VCOMI
GSW
Figure 3. Amp Section as VCOM Buffer
MUX AND BFR SECTIONS AS NRS BUFFER
SEL
BFRO
MUXO
NRSA
NRS
+1
+1
BFRI
GSW
04758-0-004
NRSB
GSW
Figure 4. MUX and BFR Sections as NRS Buffer
MUX SECTION AS VCOM BUFFER
MUXO
+1
VCOM
GSW
Figure 5. MUX Section as VCOM Buffer
Rev. 0 | Page 8 of 16
04758-0-005
VCOMI
ADSY8401
LEVEL SHIFTER CHARACTERISTICS
LEVEL SHIFTER TIMING CHARACTERISTICS
INVERTING
DI9
DI10
DI11
DO9T
DO10T
DO11T
DO9C
DO10C
DO11C
COMPLEMENTARY
04758-0-006
DO1
DO2
DO3
DO4
DO5
DO6
DO7
DO8
DI1
DI2
DI3
DI4
DI5
DI6
DI7
DI8
Figure 6. Level Shifter Timing Characteristics
INVERTING AND COMPLEMENTARY LEVEL SHIFTER TIMING
INPUTS
t11
t12
INVERTING
OUTPUTS
t16
t18
NONINVERTING
OUTPUTS
t13
t14
04758-0-007
t15
t17
Figure 7. Inverting and Complementary Level Shifter Timing
Table 4.
Parameter
LEVEL SHIFTER SECTION
Output Rise, Fall Times, tr, tf
DO1–DO8, DO9T–DO11T, DO9C–DO11C
DO1–DO8
Propagation Delay times, t11, t12, t13, t14
DO1–DO8, DO9T–DO11T, DO9C–DO11C
DO1–DO8
Propagation Delay Skew, t15, t16
DO1–DO8
Propagation Delay Skew, t15, t16, t17, t18
DO1–DO8 to DO9T–DO11T and DO9C–DO11C
Conditions
TA min to TA max
Min
Typ
Max
Unit
CL = 40 pF
CL = 300 pF
20
130
30
150
ns
ns
CL = 40 pF
CL = 300 pF
CL = 40 pF
23
60
50
80
ns
ns
2
ns
CL = 40 pF
4
Rev. 0 | Page 9 of 16
ns
ADSY8401
LEVEL SHIFTING EDGE DETECTOR TIMING CHARACTERISTICS
DTCTO
R
04758-0-008
S
DTCTI
Figure 8. Level Shifting Edge Detector Timing Characteristics
LEVEL SHIFTING EDGE DETECTOR TIMING
AVCCL
DTCTI
DVCC
t19
t20
04758-0-009
AGNDL
DTCTO
DGND
Figure 9. Level Shifting Edge Detector Timing
Table 5.
Parameter
LEVEL SHIFTING EDGE DECTECTOR
Input Low Voltage, VIL
Input High Voltage, VIH
Input Rising Edge Threshold Voltage, VTH LH
Input Falling Edge Threshold Voltage, VTH HL
Output High Voltage, VOH
Output Low Voltage, VOL
Input Current High State, IIH
Input Current, IIL
Input Rising Edge Propagation Delay Time, t19
Input Falling Edge Propagation Delay Time, t20
t20 Variation with Temperature, ∆t20
Output Rise, Fall Time, tr
Conditions
CL = 10 pF
Min
Typ
Max
Unit
AGND + 1.5
V
V
V
V
V
V
µA
µA
ns
ns
ns
ns
AVCC − 1.5
DVCC − 0.5
−2.5
TA = 25°C to 85°C
Rev. 0 | Page 10 of 16
AGND + 3
AVCC − 3
DVCC − 0.25
0.25
1.2
−1.2
15.5
16.5
2
6
0.5
2.5
ADSY8401
APPLICATIONS
BFR CHANNEL
The ADSY8401 is designed as part of a DecDriver® based LCD
driver platform. The level shifters provide an interface between
the image processor and a timing loop, operating at 3.3 V, and
the LCD with high voltage timing input levels. The edge
detecting level shifter provides an interface between the LCD
monitor output at high voltage and a timing loop such as the
AD8389 at 3.3 V. Low offset buffers, AMP and MUX, are
capable of driving high capacitive loads such as VCOM and
NRS without additional buffering. The high current buffer BFR
is capable of 100 mA output current, providing high slew rates
into large capacitive loads, which are often required for the
precharge input, NRS of LCDs.
The BFR channel comprises a high output current buffer. It can
be used to increase the output drive capability of either the
AMP or MUX channels. The BFR channel is most often used in
series with the MUX channel output to realize a high current
drive NRS switch.
GROUNDED OUTPUT MODE
In certain designs it is desirable to pull the amplifier and buffer
outputs to near ground during power-down. When the voltage
on the GSW pin is tied to DGND, the AMPO, MUXO, and
BFRO outputs are pulled to near AGND. When the GSW input
is left unconnected or tied to DVCC, all outputs operate
normally. The level shifters are not affected by the GSW input.
AMP CHANNEL
The AMP channel is a low offset unity gain buffer designed to
drive a wide range of capacitive loads with a clean settling
response. In LCD panel applications, it is most frequently used
as a VCOM buffer.
DRIVING VCOM
The AMP channel comprises a low offset, unity gain buffer. It
can be used to drive a large capacitive load, such as VCOM,
directly with low overshoot. In certain systems, it might be
desirable for a single ADSY8401 to drive the VCOM inputs of
more than one LCD panel. In such cases, the MUX channel can
be used to drive VCOM directly. The MUX’s switching function
is not used, and its output is tied directly to VCOM without the
use of the BFR channel. Offset errors and pulse response are the
same as that of the AMP channel.
MUX CHANNEL
The MUX channel is a 2-input, buffered analog multiplexer. The
overall performance of its buffered output is very similar to that
of the AMP channel. It is ideally suited for driving a wide range
of capacitive loads, from very small up to several nF.
DRIVING NRS
Analog voltage switching capability is provided by the MUX
channel. To achieve rapid settling while driving the capacitive
NRS input, the output of the MUX is buffered by the high
current drive BFR channel.
AD8381/AD8382/AD8383
REFERENCE
VOLTAGES
IMAGE
PROCESSOR
10/12
LCD
VRH, VRL,
V1, V2
DB(0:9/11)
6
VID(0:6)
STSQ, XFR,
CLK, R/L, INV
ADSY8401
DI1–DI8
DY, DIRY, NRG
DO1–DO4
ENBX(1–4)
DO5–DO8
DX, DY, DIRY, NRG
DIRX, CLX,CLY
DXI, CLXI,
ENBX(1–4)I
ENBX(1–4)xO
DXxO
CLXxO
CLK
MONITxI
VCOM
NRS1
NRS2
INV
DI9–DI11
DO9T–DO11T,
DO9C–DO11C
CLX, CLXN
CLY, CLYN
DIRX
DTCTO
DTCTI
MONITOR
AMPI
AMPO
VCOM
BFRI
BFRO
NRS
MUXA
MUXB
MUXO
SEL
Figure 10. Typical Application—One ADSY8401 per Color
Rev. 0 | Page 11 of 16
04758-0-010
1/3 AD8389
ADSY8401
IMAGE
PROCESSOR
RED LCD
ENBXR(1:4)
DI1–DI4
ENBXB(1:4)
DI5–DI8
DO1–DO4
ENBX(1–4)
DO5–DO8
DX
DY
DIRY
DI9–DI10
CLXR, CLYRB
DI11
CLXB
DO9T–DO9C
CLX, CLXN
DO10T–DO10C
CLY, CLYN
DO11T, DO11C
DIRX
BLUE LCD
ENBX(1–4)
DX
DY
DIRY
CLX, CLXN
CLY, CLYN
DO1–DO4
DI1–DI4
DI5–DI7
DVCC
DIRX
DIRX
DO5
DO6
DO7
DI8
DO8
DO9T
DO9C
DI9
DI10–DI11
CLXG, CLYG
GREEN LCD
ENBX(1–4)
DX
DY
DIRY
CLX, CLXN,
CLY, CLYN
DO10T–DO11T
DO11T–DO11C
04758-0-011
ENBXG(1:4)
DX, DY, DIRY
DIRX
Figure 11. Typical Application—Two ADSY8401 per System, Level Shifters
ADSY8401
VCOMR
NRSA
NRSB
SEL
AMPI
BFRI
MUXA
MUXB
SEL
RED LCD
AMPO
VCOM
BFRO
NRS
MUXO
BLUE LCD
VCOM
NRS
ADSY8401
DVCC
AMPI
BFRI
MUXA
MUXB
SEL
AMPO
BFRO
MUXO
GREEN LCD
VCOM
NRS
Figure 12. Typical Application—Two ADSY8401 per System, Amplifiers
Rev. 0 | Page 12 of 16
04758-0-012
VCOMG
DC INPUT ~ AVCC/2
VCOMB
ADSY8401
PCB DESIGN FOR OPTIMIZED THERMAL PERFORMANCE
The total maximum power dissipation of the ADSY8401 is
partly load-dependent. In a typical 60 Hz XGA system, the total
maximum power dissipation is ≈ 1 W. The ADSY8401 package
is designed to provide superior thermal characteristics, partly
through the exposed die paddle on the bottom surface of the
package. To take full advantage of this feature, the exposed
paddle must be in direct thermal contact with the PCB, which
then serves as a heat sink.
Solder Masking
A thermally effective PCB must incorporate a thermal pad and
a thermal via structure. The thermal pad provides a solderable
contact surface on the top surface of the PCB. The thermal via
structure provides a thermal path to the inner and bottom
layers of the PCB to remove heat.
Solder Mask
Top layer
Pads
Thermal vias
To minimize the formation of solder voids due to solder flowing
into the via holes (solder wicking), the via diameter should be
small. Solder masking of the via holes on the top layer of the
PCB plugs the via holes, inhibiting solder flow into the holes. To
optimize the thermal pad coverage, the solder mask diameter
should be no more than 0.1 mm larger than the via diameter.
Table 7. Recommended Solder Mask Dimensions
Bottom layer
Dimensions
Set by customer’s PCB design rules
0.25 mm diameter circular mask centered
on the vias
Set by customer’s PCB design rules
Thermal Pad Design
7mm
7mm
To minimize thermal performance degradation of production
PCBs, the contact area between the thermal pad and the PCB
should be maximized. Therefore, the size of the thermal pad on
the top PCB layer should match the exposed paddle. The second
thermal pad of the same size should be placed on the bottom
side of the PCB. At least one thermal pad should be in direct
thermal contact with an external plane such as AVCC or GND.
Thermal Via Structure Design
Effective heat transfer from the top to the inner and bottom
layers of the PCB requires thermal vias incorporated into the
thermal pad design. Thermal performance increases logarithmically with the number of vias. Near optimum thermal
performance of production PCBs is attained only when tightly
spaced thermal vias are placed on the full extent of the thermal
pad.
LAND PATTERN–TOP LAYER
Table 6. Recommended Land Pattern Dimensions
Land Pattern
Top and Bottom Layers
Pad size
Pad pitch
Thermal pad size
Thermal via structure
Dimensions
0.5 mm × 0.25 mm
0.5 mm
5.25 mm × 5.25 mm
0.25 mm diameter vias on
0.5 mm grid
LAND PATTERN–BOTTOM LAYER
Thermal Pad and Thermal Via Connections
SOLDER MASK–TOP LAYER
Figure 13. PCB Layers
Rev. 0 | Page 13 of 16
04758-0-013
Thermal pads are connected to the AGND or AVCC plane. The
thermal pad on the solder side is connected to a plane. The use
of thermal spokes is not recommended when connecting the
thermal pads or via structure to the plane.
ADSY8401
POWER SUPPLY SEQUENCING
Layout and Grounding
As indicated in the Absolute Maximum Ratings section, the
voltage at any input pin cannot exceed its supply voltage by
more than 0.5 V. To ensure compliance with the absolute
maximum ratings, power-up and power-down sequencing
might be required.
The analog outputs and the digital inputs of the ADSY8401 are
on opposite sides of the package. Keep these sections separated
to minimize crosstalk and coupling of digital inputs into the
analog outputs.
During power-up, initial application of nonzero voltages to any
of the input pins must be delayed until the supply voltage ramps
up to at least the highest maximum operational input voltage.
During power-down, the voltage at any input pin must reach
zero during a period not exceeding the hold-up time of the
power supply.
Failure to comply with the absolute maximum ratings may
result in functional failure or damage to the internal ESD
diodes. Damaged ESD diodes can cause temporary parametric
failures, which can result in image artifacts. Damaged ESD
diodes cannot provide full ESD protection, reducing reliability.
All signal trace lengths should be made as short and direct as
possible to prevent signal degradation due to parasitic effects.
Note that a digital signal should not cross or be routed near
analog signals.
It is imperative to provide a solid analog ground plane under
and around the ADSY8401. All ground pins of the part should
be connected directly to this ground plane with no extra signal
path length. This includes AGND, AGNDL, and DGND. The
return traces for any of the signals should be routed close to the
ground pin for that section to prevent stray signals from
coupling into other ground pins.
Power Supply Bypassing
Power-on sequence:
All power supply pins of the ADSY8401 must be properly
bypassed to the analog ground plane for optimum performance.
1.
Apply power to supplies.
TOTAL POWER DISSIPATION
2.
Apply inputs.
The total power dissipation of the ADSY8401 has three
components:
Power-off sequence:
1.
Remove signal from inputs.
2.
Remove power from supplies.
•
Quiescent power dissipation when all digital inputs are low.
•
Dynamic power dissipation due to the capacitance of
the LCD (typical CL = 200 pF for all the NRG control inputs,
CL = 40 pF for all other control inputs).
•
Average power dissipation due to the toggling inputs.
Power-Off Sequencing Using the GSW Pin
In certain designs it is desirable to pull the amplifier, buffer, and
level shifter outputs to near ground during power-down.
When DI1–DI11 are at digital low, the quiescent power dissipation of the ADSY8401 is 576 mW. When DI1–DI11 are at digital
high, the quiescent power dissipation is 771 mW.
Power-off sequence with GSW:
1.
Apply low to the GSW pin.
2.
Apply high to all level shifter input pins.
3.
Pull the MUXA, MUXB, AMPI, and BFRI inputs to AGND.
4.
Remove AVCC.
5.
Remove DVCC.
LAYOUT CONSIDERATIONS
The ADSY8401 is a mixed-signal, high speed, high accuracy
device. To fully realize its specifications, it is essential to use a
properly designed printed circuit board.
The typical dynamic power dissipation of each of the three
ADSY8401, due to the capacitance of the LCD, is 155 mW in a
typical 60 Hz XGA system, shown in Figure 10. It is 304 mW
and 153 mW, respectively, for the two ADSY8401s in the 60 Hz
XGA system shown in Figure 11.
The average power dissipation of each of the three ADSY8401
due to DI1–DI11 toggling is 23 mW in the system shown in
Figure 10. It is 32 mW and 22 mW, respectively, for the two
ADSY8401 in the system shown in Figure 11.
The total power dissipation of each of the three ADSY8401 in
the XGA system, shown in Figure 10, is 754 mW.
The total power dissipation of the two ADSY8401s in the XGA
system, shown in Figure 12, is 912 mW and 751 mW,
respectively.
Rev. 0 | Page 14 of 16
ADSY8401
OUTLINE DIMENSIONS
7.00
BSC SQ
0.60 MAX
0.60 MAX
37
36
PIN 1
INDICATOR
6.75
BSC SQ
TOP
VIEW
0.30
0.23
0.18
PIN 1
INDICATOR
48
1
5.25
5.10 SQ
4.95
BOTTOM
VIEW
0.50
0.40
0.30
25
24
12
13
0.25 MIN
1.00
0.85
0.80
12° MAX
5.50
REF
0.80 MAX
0.65 TYP
0.05 MAX
0.02 NOM
0.50 BSC
SEATING
PLANE
0.20 REF
COPLANARITY
0.08
COMPLIANT TO JEDEC STANDARDS MO-220-VKKD-2
Figure 14. 48-Lead Lead Frame Chip Scale Package [LFCSP]
(CP-48)
Dimensions shown in millimeters
ORDERING GUIDE
Model
ADSYS8401JPCZ1
1
Temperature Range
0°C to 85°C
Package Description
Lead Frame Chip Scale Package
Z = Pb-free part.
Rev. 0 | Page 15 of 16
Package Option
CP-48
ADSY8401
NOTES
© 2004 Analog Devices, Inc. All rights reserved. Trademarks and
registered trademarks are the property of their respective owners.
D04758–0–7/04(0)
Rev. 0 | Page 16 of 16