Order this document
by MOC8111/D
SEMICONDUCTOR TECHNICAL DATA
[CTR = 20% Min]
GlobalOptoisolator
! !
! "!"!
!
[CTR = 50% Min]
[CTR = 100% Min]
*Motorola Preferred Devices
The MOC8111, MOC8112 and MOC8113 devices consist of a gallium
arsenide infrared emitting diode optically coupled to a monolithic silicon
phototransistor detector. The internal base–to–Pin 6 connection has been
eliminated for improved noise immunity.
STYLE 3 PLASTIC
• To order devices that are tested and marked per VDE 0884 requirements, the
suffix ”V” must be included at end of part number. VDE 0884 is a test option.
Applications
6
• Appliances, Measuring Instruments
• Regulation and Feedback Control
1
STANDARD THRU HOLE
CASE 730A–04
• Programmable Controllers
• Interfacing and coupling systems of different potentials and impedances
• General Purpose Switching Circuits
• High Noise Environments
SCHEMATIC
MAXIMUM RATINGS (TA = 25°C unless otherwise noted)
Rating
Symbol
Value
Unit
Reverse Voltage
VR
6
Volts
Forward Current — Continuous
IF
60
mA
LED Power Dissipation @ TA = 25°C
with Negligible Power in Output Detector
Derate above 25°C
PD
120
mW
1.41
mW/°C
30
Volts
1
6
2
5
3
4
INPUT LED
OUTPUT TRANSISTOR
Collector–Emitter Voltage
VCEO
Emitter–Collector Voltage
VECO
7
Volts
Collector Current — Continuous
IC
150
mA
Detector Power Dissipation @ TA = 25°C
with Negligible Power in Input LED
Derate above 25°C
PD
150
mW
1.76
mW/°C
VISO
7500
Vac(pk)
Total Device Power Dissipation @ TA = 25°C
Derate above 25°C
PD
250
2.94
mW
mW/°C
Ambient Operating Temperature Range(2)
TA
– 55 to +100
°C
Tstg
– 55 to +150
°C
PIN 1.
2.
3.
4.
5.
6.
LED ANODE
LED CATHODE
N.C.
EMITTER
COLLECTOR
N.C.
TOTAL DEVICE
Isolation Surge Voltage(1)
(Peak ac Voltage, 60 Hz, 1 sec Duration)
Storage Temperature Range(2)
TL
260
°C
1. Isolation surge voltage is an internal device dielectric breakdown rating.
1. For this test, Pins 1 and 2 are common, and Pins 4 and 5 are common.
2. Refer to Quality and Reliability Section in Opto Data Book for information on test conditions.
Soldering Temperature (10 sec, 1/16″ from case)
Preferred devices are Motorola recommended choices for future use and best overall value.
GlobalOptoisolator is a trademark of Motorola, Inc.
REV 1
Optoelectronics
Device Data
Motorola
Motorola, Inc.
1995
1
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise noted)(1)
Symbol
Min
Typ(1)
Max
Unit
VF
—
1.15
1.3
1.05
1.5
Volts
Reverse Leakage Current (VR = 6 V)
IR
—
0.05
10
µA
Capacitance (V = 0, f = 1 MHz)
CJ
—
18
—
pF
ICEO
—
1
50
nA
ICEO
—
1
—
µA
Collector–Emitter Breakdown Voltage (IC = 1 mA)
V(BR)CEO
30
45
—
Volts
Emitter–Collector Breakdown Voltage (IE = 100 µA)
V(BR)ECO
7
7.8
—
Volts
Collector–Emitter Capacitance (f = 1 MHz, VCE = 0)
CCE
—
7
—
pF
IC (CTR)(2)
2 (20)
5 (50)
10 (100)
5 (50)
10 (100)
20 (200)
—
—
—
mA (%)
VCE(sat)
—
0.15
0.4
Volts
Turn–On Time (IC = 2 mA, VCC = 10 V, RL = 100 Ω)(3)
ton
—
7.5
20
µs
Turn–Off Time (IC = 2 mA, VCC = 10 V, RL = 100 Ω)(3)
toff
—
5.7
20
µs
tr
—
3.2
—
µs
Characteristic
INPUT LED
Forward Voltage (IF = 10 mA)
TA = 25°C
TA = –55°C
TA = 100°C
OUTPUT TRANSISTOR
Collector–Emitter Dark Current
(VCE = 10 V, TA = 25°C)
(VCE = 10 V, TA = 100°C)
COUPLED
Output Collector Current
(IF = 10 mA, VCE = 10 V)
MOC8111
MOC8112
MOC8113
Collector–Emitter Saturation Voltage (IC = 500 µA, IF = 10 mA)
Rise Time (IC = 2 mA, VCC = 10 V, RL = 100 Ω)(3)
Fall Time (IC = 2 mA, VCC = 10 V, RL = 100 Ω)(3)
tf
—
4.7
—
µs
Isolation Voltage (f = 60 Hz, t = 1 sec)(4)
VISO
7500
—
—
Vac(pk)
Isolation Resistance (V = 500 V)(4)
RISO
1011
—
—
Ω
Isolation Capacitance (V = 0, f = 1 MHz)(4)
CISO
—
0.2
—
pF
1.
2.
3.
4.
Always design to the specified minimum/maximum electrical limits (where applicable).
Current Transfer Ratio (CTR) = IC/IF x 100%.
For test circuit setup and waveforms, refer to Figure 10.
For this test, Pins 1 and 2 are common, and Pins 4 and 5 are common.
2
VF, FORWARD VOLTAGE (VOLTS)
PULSE ONLY
PULSE OR DC
1.8
1.6
1.4
TA = –55°C
1.2
25°C
100°C
1
1
10
100
IF, LED FORWARD CURRENT (mA)
1000
Figure 1. LED Forward Voltage versus Forward Current
2
I C , OUTPUT COLLECTOR CURRENT (NORMALIZED)
TYPICAL CHARACTERISTICS
10
NORMALIZED TO:
IF = 10 mA
1
0.1
0.01
0.5
1
2
5
10
20
IF, LED INPUT CURRENT (mA)
50
Figure 2. Output Current versus Input Current
Motorola Optoelectronics Device Data
24
IF = 10 mA
20
16
5 mA
12
8
2 mA
4
1 mA
0
0
1
2
3
4
5
6
7
8
9
VCE, COLLECTOR–EMITTER VOLTAGE (VOLTS)
10
10
7
5
NORMALIZED TO TA = 25°C
2
1
0.7
0.5
0.2
0.1
–60
–20
0
20
40
60
80
TA, AMBIENT TEMPERATURE (°C)
100
100
NORMALIZED TO:
VCE = 10 V
TA = 25°C
100
VCC = 10 V
50
20
10
VCE = 30 V
10
RL = 1000
5
RL = 100
1
0
20
tf
tf
40
60
80
TA, AMBIENT TEMPERATURE (°C)
1
0.1
100
100
70
50
0.2
10
7
5
100
1
2
5
10
20
IF, LED INPUT CURRENT (mA)
100
70
50
t off , TURN–OFF TIME ( µ s)
RL = 1000
0.5
10
50
100
Figure 6. Rise and Fall Times
(Typical Values)
VCC = 10 V
20
tr
tr
Figure 5. Dark Current versus Ambient Temperature
VCC = 10 V
20
RL = 1000
10
7
5
100
10
2
2
1
0.1
{
{
2
10 V
0.1
t on, TURN–ON TIME ( µs)
–40
Figure 4. Output Current versus Ambient Temperature
t, TIME (µs)
ICEO, COLLECTOR–EMITTER DARK CURRENT
(NORMALIZED)
Figure 3. Collector Current versus
Collector–Emitter Voltage
I C , OUTPUT COLLECTOR CURRENT (NORMALIZED)
IC , COLLECTOR CURRENT (mA)
28
0.2
0.5 0.7 1
2
5 7 10
IF, LED INPUT CURRENT (mA)
20
Figure 7. Turn–On Switching Times
Motorola Optoelectronics Device Data
50 70 100
1
0.1
0.2
0.5 0.7 1
2
5 7 10
IF, LED INPUT CURRENT (mA)
20
50 70 100
Figure 8. Turn–Off Switching Times
3
20
18
CLED
f = 1 MHz
C, CAPACITANCE (pF)
16
14
12
10
8
CCE
6
4
2
0
0.05 0.1
0.2
0.5
1
2
5
V, VOLTAGE (VOLTS)
10
20
50
Figure 9. Capacitances versus Voltage
TEST CIRCUIT
WAVEFORMS
INPUT PULSE
VCC = 10 V
IC
RL = 100 Ω
10%
INPUT
INPUT CURRENT ADJUSTED
TO ACHIEVE IC = 2 mA.
OUTPUT
OUTPUT PULSE
90%
tr
tf
toff
ton
Figure 10. Switching Time Test Circuit and Waveforms
4
Motorola Optoelectronics Device Data
PACKAGE DIMENSIONS
–A–
6
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. DIMENSION L TO CENTER OF LEAD WHEN
FORMED PARALLEL.
4
–B–
1
3
F 4 PL
C
N
–T–
L
K
SEATING
PLANE
J 6 PL
0.13 (0.005)
G
M
E 6 PL
D 6 PL
0.13 (0.005)
M
T A
B
M
M
T B
M
A
M
DIM
A
B
C
D
E
F
G
J
K
L
M
N
M
INCHES
MIN
MAX
0.320
0.350
0.240
0.260
0.115
0.200
0.016
0.020
0.040
0.070
0.010
0.014
0.100 BSC
0.008
0.012
0.100
0.150
0.300 BSC
0_
15 _
0.015
0.100
STYLE 3:
PIN 1.
2.
3.
4.
5.
6.
MILLIMETERS
MIN
MAX
8.13
8.89
6.10
6.60
2.93
5.08
0.41
0.50
1.02
1.77
0.25
0.36
2.54 BSC
0.21
0.30
2.54
3.81
7.62 BSC
0_
15 _
0.38
2.54
ANODE
CATHODE
NC
EMITTER
COLLECTOR
NC
CASE 730A–04
ISSUE G
–A–
6
4
–B–
1
S
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3
F 4 PL
L
H
C
–T–
G
J
K 6 PL
E 6 PL
0.13 (0.005)
D 6 PL
0.13 (0.005)
M
T A
M
B
M
SEATING
PLANE
T B
M
A
M
CASE 730C–04
ISSUE D
Motorola Optoelectronics Device Data
M
DIM
A
B
C
D
E
F
G
H
J
K
L
S
INCHES
MIN
MAX
0.320
0.350
0.240
0.260
0.115
0.200
0.016
0.020
0.040
0.070
0.010
0.014
0.100 BSC
0.020
0.025
0.008
0.012
0.006
0.035
0.320 BSC
0.332
0.390
MILLIMETERS
MIN
MAX
8.13
8.89
6.10
6.60
2.93
5.08
0.41
0.50
1.02
1.77
0.25
0.36
2.54 BSC
0.51
0.63
0.20
0.30
0.16
0.88
8.13 BSC
8.43
9.90
*Consult factory for leadform
option availability
5
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: INCH.
3. DIMENSION L TO CENTER OF LEAD WHEN
FORMED PARALLEL.
–A–
6
4
–B–
1
3
L
N
F 4 PL
C
–T–
SEATING
PLANE
G
J
K
DIM
A
B
C
D
E
F
G
J
K
L
N
INCHES
MIN
MAX
0.320
0.350
0.240
0.260
0.115
0.200
0.016
0.020
0.040
0.070
0.010
0.014
0.100 BSC
0.008
0.012
0.100
0.150
0.400
0.425
0.015
0.040
MILLIMETERS
MIN
MAX
8.13
8.89
6.10
6.60
2.93
5.08
0.41
0.50
1.02
1.77
0.25
0.36
2.54 BSC
0.21
0.30
2.54
3.81
10.16
10.80
0.38
1.02
D 6 PL
E 6 PL
0.13 (0.005)
M
T A
M
B
M
*Consult factory for leadform
option availability
CASE 730D–05
ISSUE D
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding
the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit,
and specifically disclaims any and all liability, including without limitation consequential or incidental damages. “Typical” parameters can and do vary in different
applications. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. Motorola does
not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in
systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of
the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such
unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless
against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death
associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part.
Motorola and
are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer.
How to reach us:
USA / EUROPE: Motorola Literature Distribution;
P.O. Box 20912; Phoenix, Arizona 85036. 1–800–441–2447
JAPAN: Nippon Motorola Ltd.; Tatsumi–SPD–JLDC, Toshikatsu Otsuki,
6F Seibu–Butsuryu–Center, 3–14–2 Tatsumi Koto–Ku, Tokyo 135, Japan. 03–3521–8315
MFAX: [email protected] – TOUCHTONE (602) 244–6609
INTERNET: http://Design–NET.com
HONG KONG: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park,
51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852–26629298
6
◊
*MOC8111/D*
Motorola Optoelectronics MOC8111/D
Device Data