Revised January 1999 CD4019BC Quad AND-OR Select Gate General Description Features The CD4019BC is a complementary MOS quad AND-OR select gate. Low power and high noise margin over a wide voltage range is possible through implementation of N- and P-channel enhancement mode transistors. These complementary MOS (CMOS) transistors provide the building blocks for the 4 “AND-OR select” gate configurations, each consisting of two 2-input AND gates driving a single 2-input OR gate. Selection is accomplished by control bits KA and KB. All inputs are protected against static discharge damage. ■ Wide supply voltage range: ■ High noise immunity: 3.0V to 15V 0.45 VDD (typ.) ■ Low power TTL compatibility: Fan out of 2 driving 74L or 1 driving 74LS Applications • AND-OR select gating • Shift-right/shift-left registers • True/complement selection • AND/OR/EXCLUSIVE-OR selection Ordering Code: Order Number Package Number Package Description CD4019BCM M16A 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150” Narrow CD4019BCSJ M16D 16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide CD4019BCN N16E 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300” Wide Devices also available in Tape and Reel. Specify by appending the suffix letter “X” to the ordering code. Connection Diagram Pin Assignments for DIP, SOIC and SOP Top View © 1999 Fairchild Semiconductor Corporation DS005952.prf www.fairchildsemi.com CD4019BC Quad AND-OR Select Gate October 1987 CD4019BC Schematic Diagram Schematic diagram for 1 of 4 identical stages www.fairchildsemi.com 2 Recommended Operation Conditions (Note 2) −0.5V to +18V Supply Voltage (VDD) Input Voltage (VIN) −65°C to +150°C Storage Temperature Range (TS) 700 mW Small Outline 500 mW Symbol IDD VOL Parameter VIH IOL IOH IIN −40°C Conditions Min +25°C Max Min +85°C Typ Max Min Max Units VDD = 5V 1 0.03 1 7.5 µA Current VDD = 10V 2 0.05 2 15 µA VDD = 15V 4 0.07 4 30 µA LOW Level HIGH Level Output Voltage VIL (Note 3) Quiescent Device Output Voltage VOH Note 2: VSS = 0V unless otherwise specified. 260°C DC Electrical Characteristics −40°C to +85°C Note 1: “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed; they are not meant to imply that the devices should be operated at these limits. The tables of “Recommended Operating Conditions” and “Electrical Characteristics” provide conditions for actual device operation. Lead Temperature (TL) (Soldering, 10 seconds) 0V to VDD V Operating Temperature Range (TA) Power Dissipation (PD) Dual-In-Line +3V to +15V DC Supply Voltage (VDD) −0.5V to VDD +0.5V Input Voltage (VIN) |IO| < 1 µA VDD = 5V 0.05 0 0.05 0.05 V VDD = 10V 0.05 0 0.05 0.05 V VDD = 15V 0.05 0 0.05 0.05 V |IO| < 1 µA VDD = 5V 4.95 4.95 5 4.95 VDD = 10V 9.95 9.95 10 9.95 V VDD = 15V 14.95 14.95 15 14.95 V V LOW Level VDD = 5V, VO = 0.5V or 4.5V 1.5 2 1.5 1.5 Input Voltage VDD = 10V, VO = 1.0V or 9.0V 3.0 4 3.0 3.0 V VDD = 15V, VO = 1.5V or 13.5V 4.0 6 4.0 4.0 V V HIGH Level VDD = 5V, VO = 0.5V or 4.5V 3.5 3.5 3 3.5 Input Voltage VDD = 10V, VO = 1.0V or 9.0V 7.0 7.0 6 7.0 V VDD = 15V, VO = 1.5V or 13.5V 11.0 11.0 9 11.0 V LOW Level Output VDD = 5V, VO = 0.4V 0.52 0.44 1 0.36 mA Current (Note 4) VDD = 10V, VO = 0.5V 1.3 1.1 2.5 0.9 mA mA V VDD = 15V, VO = 1.5V 3.6 3.0 10 2.4 HIGH Level Output VDD = 5V, VO = 4.6V −0.2 −0.16 −0.4 −0.12 mA Current (Note 4) VDD = 10V, VO = 9.5V −0.5 −0.4 −1.0 −0.3 mA VDD = 15V, VO = 13.5V −1.4 Input Current VDD = 15V, VIN = 0V −0.30 −10−5 −0.30 −1.0 µA VDD = 15V, VIN = 15V 0.30 10−5 0.30 1.0 µA −1.2 −3.0 −1.0 mA Note 3: VSS = 0V unless otherwise specified. Note 4: IOH and IOL are tested one output at a time. 3 www.fairchildsemi.com CD4019BC Absolute Maximum Ratings(Note 1) (Note 2) CD4019BC AC Electrical Characteristics (Note 5) TA = 25°C, CL = 50 pF, RL = 200k, unless otherwise specified Typ Max Units tPHL, Symbol Propagation Delay, VDD = 5V 100 300 ns tPLH Input to Output VDD = 10V 50 120 ns VDD = 15V 45 100 ns HIGH-to-LOW Level VDD = 5V 100 200 ns Transition Time VDD = 10V 50 100 ns VDD = 15V 40 80 ns LOW-to-HIGH Level VDD = 5V 150 300 ns Transition Time VDD = 10V 70 140 ns VDD = 15V 50 100 ns All A and B Inputs 5 7.5 pF KA and KB Inputs 10 15 pF tTHL tTLH CIN Parameter Input Capacitance Conditions Note 5: AC Parameters are guaranteed by DC correlated testing. www.fairchildsemi.com 4 Min CD4019BC Physical Dimensions inches (millimeters) unless otherwise noted 16-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150” Narrow Package Number M16A 16-Lead Small Outline Package (SOP), EIAJ TYPE II, 5.3mm Wide Package Number M16D 5 www.fairchildsemi.com CD4019BC Quad AND-OR Select Gate Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 16-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300” Wide Package Number N16E LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support 1. Life support devices or systems are devices or systems device or system whose failure to perform can be reawhich, (a) are intended for surgical implant into the sonably expected to cause the failure of the life support body, or (b) support or sustain life, and (c) whose failure device or system, or to affect its safety or effectiveness. to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the www.fairchildsemi.com user. Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications.