March 2004 LMX4268 Radio Transceiver for DECT 1.0 General description 2.0 Features ■ ■ ■ ■ ■ ■ ■ The LMX4268 integrates a complete transmitter, consisting of a phase locked loop, VCO and PA driver. The receiver ■ contains LNA, quadrature downconverter, polyphase filter, ■ automatic gain control and demodulator. ■ The LMX4268 operates from a single 2.5V supply. The ■ LMX4268 is manufactured in National’s 0.25µm CMOS ■ technology, and is packaged in a 44 pin LLP package. ■ The LMX4268 is a radio transceiver integrated circuit optimized for the Digital Cordless Telecommunications (DCT) system. The transceiver, when combined with a power amplifier and a Tx/Rx switch, implements a complete 2.4GHz ISM band digital radio transceiver compliant with the FCC rules part 15. The LMX4268 interfaces directly to National Semiconductor’s SC144XX DCT family of baseband processors. Fully integrated 2.4 GHz CMOS low-IF transceiver Low power consumption On-chip Voltage Controlled Oscillator (VCO) On-chip low noise amplifier (LNA) Open-loop modulation On chip Modulation Gain Amplifier (MGA) On-chip timing control Four digital (5 mA) output ports 0 dBm PA driver output dual bit rate 0.576 MHz (LRb) / 1.152 MHz (HRb) sensitivity -96 dBm (LRb) / -93 dBm (HRb) 2.5V operation Small 44 pin Leadless Leadframe Package 3.0 Applications ■ (DCT) Digital Cordless Telecommunications 4.0 System Diagram AGC RX DATA DEMOD. BALUN LNA RSSI 0° 90° DATA MICROWIRE PA BALUN PADR MGA PORTS TX DATA © 2004 National Semiconductor Corporation X2 CLOCK LE PLL BIAS R_REF www.national.com LMX4268 Radio Transceiver for DECT ADVANCED INFORMATION LMX4268 5.0 Specifications 5.1 ABSOLUTE MAXIMUM RATINGS Table 1. Absolute Maximum Ratings Parameter Vddmax 1,2 Description Power Supply Voltage Min Typ Max Units -0.3 - 3.0 V (Vdd_shield, Vdd_ADC, Vdd_mix, Vdd_LNA, Vdd_ESD, Vdd_PAdr, Vdd_presc, Vdd_PLL, Vdd_VCO, Vdd_bias, Vdd_dig, Vdd_RSSI) - - 0.3 V Vnmax Absolute difference between power supplies Voltage on any pin -0.3 - Vdd+0.3 V Tstorage Storage Temperature -40 - +150 °C TLead Lead Temp. (solder 4 sec)3 - - +260 °C VHBM ESD - human body model 4 - - 2.0 kV VMM ESD - machine model 4 - - 200 V 1.tbc = To be characterized 2.Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is intended to be functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions, see the Electrical Characteristics. The guaranteed specifications apply only to the test conditions listed. 3.MSL 2 (Moisture Sensitivity Level) is valid when the standard reflow process (235°C) is used. MSL 2 means 1 year shelf life after opening dry-pack. MSL 2(1 year shelf life) is also valid when the leadfree reflow process (260°C) is used. Storage conditions are max. 30°C / 60% rel. humidity. 4.ESD STATEMENT This device is a high performance RF integrated circuit and is ESD sensitive. Handling and assembly of this device should be performed at ESD free workstations. 5.2 ELECTRICAL CHARACTERISTICS Table 2. Recommended Operating Conditions Parameter Description Min Typ Max Units Vdd Power Supply Voltage (Vdd_shield, Vdd_ADC, Vdd_mix, Vdd_LNA, Vdd_ESD, Vdd_PAdr, Vdd_presc, Vdd_PLL, Vdd_VCO, Vdd_bias, Vdd_dig, Vdd_RSSI) 2.25 2.5 2.75 V VTXout PA driver output biasing voltage on pins TXoutZ, TXout - 2.0 - V Ta Operating ambient temperature -20 - +70 °C R_ref Reference resistor connected from pin 31 to Vss (see Table 1) 61 62 63 kΩ www.national.com 2 Datasheet Status Product Status Definition Advance Information Formative or in Design This data sheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This data sheet contains preliminary data. Supplementary data will be published at a later date. National Semiconductor Corporation reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. No Identification Noted Full production This data sheet contains final specifications. National Semiconductor Corporation reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. Obsolete Not in Production This data sheet contains specifications on a product that has been discontinued by National Semiconductor Corporation. The datasheet is printed for reference information only. National Semiconductor reserves the right to make changes without notice to any products herein to improve reliability, function or design. National does not assume any liability arising out of the application or use of any product or circuit described herein; neither does it convey any license under its patent rights, nor the right of others. 3 LMX4268 6.0 Product Status Definitions LMX4268 Radio Transceiver for DECT 7.0 Package Information inches (millimeters) unless otherwise noted Figure 1. 44 pins Leadless Leadframe Package - NS Package Number LQA44 Note: Refer to the application note AN-1187 for relevant soldering information. This document can be downloaded from http://www.national.com/an/AN/AN-1187.pdf LIFE SUPPORT POLICY NATIONAL’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform, when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. BANNED SUBSTANCE COMPLIANCE National Semiconductor certifies that the products and packing materials meet the provisions of the Customer Products Stewardship Specification (CSP-9-111C2) and the Banned Substances and Materials of Interest Specification (CSP-9-111S2) and contain no “Banned Substances” as defined in CSP-9-111S2. National Semiconductor Corporation Tel: 1-800-272-9959 Fax: 1-800-737-7018 Email: [email protected] National Semiconductor Europe Fax: +49 (0) 180-530 85 86 Email: [email protected] Deutsch Tel: +49 (0) 69 9508 6208 English Tel: +44 (0) 870 24 0 2171 Francais Tel: +33 (0) 1 41 91 8790 National Semiconductor Asia Pacific Customer Response Group Tel: 65-254-4466 Fax: 65-250-4466 Email: [email protected] National Semiconductor Japan Ltd. Tel: 81-3-5639-7560 Fax: 81-3-5639-7507 www.national.com National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.