ETC NXA66

NXA66 Series | 66W DC/DC
66 Watt non-isolated DC/DC converters
NXA66 SERIES
Single output, selectable
Transient response from 0A to rated full load (up to 30A/µs), recovery within 100µsec
Democratic current sharing, no need for master/slave configuration
Programmable output voltage
Remote enable pin
Power good signal
True double ended differential remote sense
True output overvoltage protection with on-board fuse
Overcurrent foldback, short circuit protection
Overtemperature protection
Edge tab mount via gold plated fingers for low interconnect voltage drop
Small size 1.375 x 2.75 x 0.588 inches
High power density, small footprint
The NXA66 non-isolated DC/DC converter is
The NXA66 uses gold plated edge tab
targeted at computing applications that
fingers for a convenient, low impedance
require point of load power conversion. The
interconnect scheme. This also allows
NXA66 is designed to meet the precise
system designers to easily accommodate
voltage and fast transient requirements of
future expansion in their systems. The
today’s high performance applications such
NXA66 has been mechanically designed to
as workstations, file servers, desktop
be compatible with integral latch retention
computers, telecommunications equipment,
mechanisms for improved shock and
adapter cards, DSP and data processing.
vibration performance in the application.
Employing synchronous rectification and
democratic current sharing, the NXA66 can
be used in a stand-alone configuration, or
paralleled as a building block to achieve
higher output currents or redundancy. The
current sharing specifications are met during
static conditions and transient conditions.
Patents pending
[ 5 YEAR WARRANTY ]
The advanced democratic current sharing
technique employed by the NXA66 removes
the need for cumbersome master/slave
combinations.
Powered by 1ICminer.com Electronic-Library Service CopyRight 2003
DC/DC
SXA10 Series
| 10W
NXA66 Series
| 66W
DC/DC
66 Watt non-isolated DC/DC converters
Absolute Maximum Ratings
Characteristic
Symbol
Min
Input voltage - continuous
Vin (cont)
Input voltage - peak/surge
or standard/level
Typ
Max
Units
Notes and Conditions
0
13.5
Vdc
Vin(+) - Vin(-)
Vin (peak)
0
13.5
V
Peaks of any duration
Operating temperature
Ta
0
+100
˚C
Ambient temperature.
See derating curves on Page 7
Storage temperature
Tstorage
-40
+100
˚C
Airflow
V air
200
Characteristic
Symbol
Min
Typ
Input voltage - operating
Vin (oper)
10.8
12
Input current - no load
lin
Input current - Quiescent
lin (off)
10
mAdc
Inrush current (I T)
linrush
0.5
A2s
Max
Units
10.4
Vdc
LFM
Either direction, along
connector axis. See derating
curves on Page 7
Max
Units
Notes and Conditions
13.2
Vdc
Input Characteristics
2
100
mAdc
Turn On/Off
Characteristic
Symbol
Input voltage - turn on
Vin (on)
Input voltage - turn off
Vin (off)
Hysteresis
Min
Typ
8.2
Notes and Conditions
Vdc
2.2
Vdc
Turn on delay - enabled,
then power applied
Tdelay
(power)
10
15
msec
With the enable signal asserted,
this is the time from when the
input voltage reaches the
minimum specified operating
voltage until the output voltage
is within the total regulation
band
Turn on delay - power
applied, then enabled
Tdelay
(enable)
10
15
msec
With input voltage greater than
the turn-on voltage, this is the
time from when the enable pin
is de-asserted until the output
voltage is within the total
regulation band
Output overshoot at
turn on/off
Vovershoot
0
1
%
Applies when enable pin is
toggled or when input voltage
is applied
Rise time
Trise
10
msec
From 10% to 90%; full resistive
load, no external capacitance
Powered by ICminer.com Electronic-Library Service CopyRight 2003
2
NXA66 Series | 66W DC/DC
66 Watt non-isolated DC/DC converters
Signal Electrical Interface
Characteristic - Signal Name Symbol
Min
Typ
Max
Units
Notes and Conditions
V
Output is internally pulled up by
a 4.7kΩ resistor to Vo. A high
indicates that the main output is
within ±10% of nominal value.
This signal transitions high within
20ms of the output voltage
coming into power good spec.
13.2
V
Iih = 0µA; open circuit voltage
-25
µA
Allowable leakage current from
signal pin into the open collector
driver
0.8
V
Converter guaranteed off when
OUTEN is less than Vil(max)
Power good output:
High level output voltage
Voh
Output enable - OUTEN:
High level input voltage
Vih
High level input current
Iih
Low level input voltage
ViI
Low level input current
IiI
-1.2
mA
Vil = 0.8V
Low level input current
Iil (max)
-1.3
mA
ViI = 0.0V; maximum source
current with output enable pin
shorted to ground
Voltage select pin - VSP
High level input voltage
Vih
13.2
V
Iih = 0µA; open circuit voltage,
VSP = 1, Vo = 3.3V
High level input current
Iih
-25
µA
Allowable leakage current from
signal pin into the open collector
driver
Low level input voltage
ViI
0.8
V
VSP = 0, Vo = 2.5V when VSP is
less than ViI (max)
Low level input current
IiI
-1.2
mA
ViI = 0.8V
Low level input current
IiI (max)
-1.1
mA
ViI = 0.0V; maximum source
current with VSP pin shorted to
ground
Max
Units
Notes and Conditions
500
mV
True +Sense and -Sense
differential amplifier
Max
Units
Notes and Conditions
Hours
Bellcore TR-332
See Note
10.8
12
0
10.8
12
0
Common Control
Characteristic
Symbol
Min
Typ
Remote sense compensation
Reliability and Service Life
Characteristic
Symbol
Min
Mean time between failure
calculated
MTBF
3,500,000
Powered by ICminer.com Electronic-Library Service CopyRight 2003
3
www.artesyn.com
Typ
SXA10 Series
| 10W
DC/DC
NXA66 Series
| 66W
DC/DC
66 Watt non-isolated DC/DC converters
Other Specifications
Characteristic
Symbol
Switching frequency
Fsw
Min
Typ
Max
300
Weight
Units
Notes and Conditions
kHz
Fixed frequency
42.6
g
Max
Units
Max. temperature shock
(operating)
5
˚C/10 min.
Temperature shock (operating)
10
˚C/hour
Temperature shock
(non-operating)
20
˚C/hour
Humidity (operating)
85
%RH
Humidity (storage)
95
%RH
Environmental Requirements
Characteristic
Symbol
Min
Typ
Altitude (operating)
0
10,000
ft
Altitude (storage)
0
50,000
ft
Shock (operational)
50
Vibration (operational)
0.01
Vibration (non-operational)
0.01
Shock (non-operational)
50
Notes and Conditions
G
11ms half sine wave
0.02
G2/Hz
From 5Hz to 20Hz, maintaining
0.02G2/Hz from 20Hz to 500Hz,
all axes
0.02
G2/Hz
From 5Hz to 20Hz, maintaining
0.02G2/Hz from 20Hz to 500Hz,
all axes
G
11ms half sine wave
Electrostatic discharge
(operating)
ESD
15
kV
Initilization level; ESD event
shall cause no out-of-regulation
conditions
Electrostatic discharge
(non-operating)
ESD
25
kV
Initialization level
Safety Agency Approvals
Characteristic
UL File Number
Approval pending
CSA File Number
Approval pending
VDE File Number
Approval pending
VDE License Number
Approval pending
Standards Compliance List
Standard
Category
EN60950
Plus A1 and A2 (pending, designed to meet)
UL1950
3rd edition (pending, designed to meet)
Powered by ICminer.com Electronic-Library Service CopyRight 2003
4
NXA66 Series | 66W DC/DC
66 Watt non-isolated DC/DC converters
Material Ratings
Characteristic - Signal Name Symbol
Value
Units
Notes and Conditions
Flammability rating
UL94V-0
Material type
FR4 PCB
Model Numbers
Model
Number
Input
Voltage
Nominal
Output Voltage
Nominal Output
Current
Minimum
Efficiency
Maximum
Load Reg.
NXA66-12P3V3C
12VDC
3.3/2.5V
20A
86/82%
±1.0%
Characteristic
Symbol
Min
Input current - operating
3.3V/2.5 Model
Input Characteristics
Typ
Max
Units
Notes and Conditions
Iin
6.8
Adc
Vin = Vin (nom); Iout = Iout
(max.); Vo = 3.3V (measured
at converter)
Input current - maximum
Iin (max.)
9.5
Adc
Vin = Vin (off) (min); Iout = Iout
(max.); Vo = 3.3V (measured
at converter)
Reflected ripple current
Iin (ripple)
100
mA pk-pk Iout - Iout (max.), measured with
recommended external bypass
capacitor
Input capacitance - internal
filter
Cinput
Input capacitance - external
bypass
Cbypass
0
100
Characteristic
Symbol
Min
Total regulation band
VSP = 1
VSP = 0
Vout
Vout
3.15
2.39
Output current - continuous
Iout
0.00
Output current - short circuit
Output voltage - noise
25
µF
Internal to converter
No max.
µF
Recommended customer added
capacitance. Low ESR type
Typ
Max
Units
Notes and Conditions
3.30
2.50
3.45
2.61
Vdc
Vdc
For all line, static/dynamic load
and temperature until end of life.
With 2 x 820µF SP Oscons
across output
20.0
Adc
Isc
2.0
Adc
Vpard
30
mV pk-pk Measurement bandwidth:
20MHz. With 2 x 820µF SP
Oscons across output
3.3V/2.5 Model
Electrical Characteristics - O/P
Powered by ICminer.com Electronic-Library Service CopyRight 2003
5
www.artesyn.com
Continuous, unit auto recovers
from short (average o/p current)
SXA10 Series
| 10W
DC/DC
NXA66 Series
| 66W
DC/DC
66 Watt non-isolated DC/DC converters
3.3V/2.5 Model
Electrical Characteristics - O/P
Characteristic
Symbol
Dynamic regulation - peak
Vdynamic
Dynamic regulation recovery time
Trecovery
External load capacitance
Cext
Min
Typ
Max
Units
Notes and Conditions
100
mV pk
Diout: No load to full load,
di/dt = 1A/µsec. External output
capacitor is 2 x 820µF SP
Oscons
150
µsec
4000
µF
Operation with more
than the maximum value is
possible, but please consult
Artesyn before doing so
Typ
Max
Units
Notes and Conditions
115
120
%
Output rising above these
thresholds fires the on-board
SCR and disables the PWM gate
drive circuitry. The SCR blows
the on-board fuse which
protects the output from the
input
26.0
Adc
Hiccup type protection,
impedance of short <90mΩ
10.0
%
Single line current share,
maximum current imbalance
between units at Iomax
Max
Units
Notes and Conditions
%
Iout = 0.25A; Vin = 12Vdc
100
3.3V/2.5 Model
Protection and Control Features
Characteristic
Symbol
Min
Overvoltage crowbar voltage
Vcrow
Overcurrent protection
inception current
Ioc
Current share
Ishare
0.00
Characteristic
Symbol
Min
Efficiency (light load)
η
25.0
3.3V/2.5 Model
Efficiency
Typ
Efficiency (full load)
VSP = 1
η
86.0
%
Vout = 3.3V: Iout = 100%
Iout (max); Vin = 12VDC
VSP = 0
η
82.0
%
Vout = 2.5V: Iout = 100%
Iout (max); Vin = 12VDC
Powered by ICminer.com Electronic-Library Service CopyRight 2003
6
NXA66 Series | 66W DC/DC
Note 1 Mechanical Drawing
Pin Connections
In this view, row A of the edge connector is visible. The
leftmost pin is pin 1, and the rightmost pin is pin 25. Row B of
the connector is on the opposite side of the unit. Pin 50 is
behind pin 1, pin 26 is behind pin 25. See below for pinout.
Note 2 Mating Connector
Recommended mating connector is AMP 145432 or equivalent.
Pin 44 is absent and is used for electrical key. AMP keying plug
PN 65025-2 may be placed in the mating connector between
pins 33 and 34, and between pins 17 and 18. This keying plug
serves as a mechanical key.
Derating Curve
20
18
400 Lfm
Output Current (A)
16
300 Lfm
14
12
200 Lfm
10
8
100 Lfm
6
4
Zero Air
2
0
Pin No.
Row A
Row B
Pin No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
12V in
12V in
12V in
12V in
12V in
Reserved
VSP
PWRGD
OUTEN
Reserved
Vo-sense
Vout
Vout
Vout
Vout
Vout
Vout
Vout
Vout
Vout
Vout
Vout
Vout
Vout
Vout
RTN
RTN
RTN
RTN
RTN
RTN
50
49
48
47
46
45
Reserved
Ishare
Reserved
Vo-sense rtn
Return
RTN
RTN
RTN
RTN
RTN
RTN
RTN
RTN
RTN
RTN
RTN
RTN
RTN
43
42
41
40
39
38
37
36
35
34
33
32
31
30
29
28
27
26
10 20 30 40 50 60 70 80 90 100
Ambient Temperature (°C)
2.750 (69.85)
0.588 (14.92)
HEATSINK
0.875 (22.23)
R0.080 (R2.03) (2 PLS)
ON CKT BOARD
1.065 (27.05)
1.375 (34.93)
0.700 (17.78)
1-25
26-50
26-50
50
1
34 33
17 18
26
25
2.586 (65.68)
0.125 (3.18)
0.400 (10.16)
ALL DIMENSIONS IN INCHES (mm)
(See Notes 1 and 2)
Figure 1 - Mechanical Drawing
Powered by ICminer.com Electronic-Library Service CopyRight 2003
7
www.artesyn.com
1-25
NXA66 Series | 66W DC/DC
66 Watt non-isolated DC/DC converters
NORTH AMERICA
e-mail: [email protected]
☎ 800 769 7274
☎+ 508 628 5600
EUROPEAN LOCATIONS
e-mail: [email protected]
IRELAND
☎+ 353 24 93130
AUSTRIA
☎+ 43 1 80150
FAR EAST LOCATIONS
e-mail: [email protected]
HONG KONG
☎+ 852 2699 2868
DS_NXA66_20000204.PDF
Data Sheet  Artesyn Technologies®, 2000
The information and specifications contained in this data sheet are
believed to be correct at time of publication. However, Artesyn
Technologies accepts no responsibility for consequences arising
from printing errors or inaccuracies. Specifications are subject to
change without notice. No rights under any patent accompany the
sale of any such product(s) or information contained herein.
Powered by ICminer.com Electronic-Library Service CopyRight 2003
8
www.artesyn.com