SMT05E Series | 5 A DC-DC Converters E Class Non-Isolated SMT05E-12V SERIES 0.8 Vin - 3.63 Vin Single output 5 A Current rating Input voltage range: 10.0 Vdc to 14.0 Vdc Output voltage range: 0.8 Vdc to 3.63 Vdc Ultra high efficiency: 91% @ 12 Vin and 3.3 Vout Extremely low internal power dissipation Minimal thermal design concerns Designed in reliability: MTBF of 6,920,000 hours per Telcordia SR-332 Ideal solution where board space is at a premium or tighter card pitch is required industry standard surface-mount footprint Available RoHS compliant THE SMT05E-12 series are non-isolated The SMT05E-12 is designed for dc-dc converters packaged in a single-in- applications that include distributed line footprint giving designers a cost power, workstations, optical network and effective solution for conversion from a 12 wireless applications. Implemented using V input to output voltages of 0.8 Vdc to state of the art surface mount technology 3.63 Vdc. The SMT05E-12 offers a wide and automated manufacturing techniques, output trim range, which allows maximum the SMT05E-12 offers compact size and design flexibility and a pathway for future efficiencies of up to 91% upgrades. [ 2 YEAR WARRANTY ] 1 File Name :lf_smt05e_12.pdf Rev (03): 23 Dec 2005 Series Converters | 15W DC/DC SMT05E Series | 5SXA10 A DC-DC E Class Non-Isolated Stresses in excess of the maximum ratings can cause permanent damage to the device. Operation of the device is not implied at these or any other conditions in excess of those given in the specification. Exposure to absolute maximum ratings can adversely affect device reliability. Absolute Maximum Ratings Characteristic Symbol Min Typ Max Units Notes and Conditions Input voltage - continuous Vin (cont) -0.3 12 14 V DC Vin(+) - Vin(-) Input voltage - peak/surge Vsurge -0.3 14.5 V DC 2s max, non-repetitive Operating temperature Top -40 100 ºC Measured at thermal reference points, see Note 1 Storage temperature Tstorage -40 125 ºC Output power (3.3V) Pout (max) 0 16.5 W Output setpoint default is 0.8V. Trim up to 3.3V with external resistor between trim pin and ground. See Application Note 144 for details. Max output current is 5A across entire trim range. All specifications are typical at nominal input Vin = 12V, full load under any resistive load combination at 25˚C unless otherwise stated. Input Characteristics Characteristic Symbol Min Typ Max Units Input voltage - operating 10 12 14 V DC Input current - no load Input current - quiescent Vin (oper) lin lin (off) 40 80 Inrush current (i2t) linrush Input ripple current Input fuse* Notes and Conditions mA DC 7 mA DC 0.1 A2µs 200 3 Vin (min) - Vin (max), enabled Converter disabled Complies with ETS300 132 Part 4.7, with recommended LISN mA rms A Slowblow/antisurge HRC recommended* *See Application Note 144 for manufacturer and part number Turn On/Off Characteristic Symbol Input voltage - turn on Turn on delay - enabled, then power applied Vin (on) Tdelay (power) Turn on delay - power applied, then enabled Tdelay (enable) Min Typ Max Units 10 20 V DC msec 20 msec Notes and Conditions With the enable signal asserted, this is the time from when the input voltage reaches the minimum specified operating voltage until the output voltage is within the total regulation band Vin = Vin (nom), then enabled. This is the time taken until the output voltage is within the total error band Rise time 2 Trise 15 msec From 10% to 90%; full resistive load, no external capacitance File Name :lf_smt05e_12.pdf Rev (03): 23 Dec 2005 SMT05E Series | 5 A DC-DC Converters E Class Non-Isolated Signal Electrical Interface Characteristic - Signal Name Symbol Min At remote/control ON/OFF pin Open collector or equivalent compatible Control pin open circuit voltage Vih High level input current Iih High level input voltage Vih Acceptable high level leakage current Iih (leakage) Low level input voltage Low level input current Typ Max 0 1 Units Notes and Conditions V See Notes 2 and 3 See Application Note 144 for Remote ON/OFF details Iih = 0 µA; open circuit voltage mA Current flowing into control pin when pin is pulled high (max at Vih = 5.5V) Vin Converter guaranteed ON when control pin is greater than Vih(min) or open cct. -10 µA Acceptable leakage current from signal pin into the open collector driver (neg = from converter) ViI 0.8 V Converter guaranteed OFF when control pin is less than Vil (max) volts. IiI 20 µA Vil = < 0.4 V Max Units Notes and Conditions 1.6 Reliability and Service Life Characteristic Symbol Mean time between failure MTBF 482,000 Hours MIL-HDBK-217F, Vin = Vin (nom); Iout = Iout (max); ambient 25ºC; ground benign environment Mean time between failure MTBF 6,920,000 Hours Telcordia SR-332 Mean time between failure MTBF Hours Demonstrated. This entry will be periodically updated as the number of test hours increase 3 www.artesyn.com Min TBA Typ File Name :lf_smt05e_12.pdf Rev (03): 23 Dec 2005 Series Converters | 15W DC/DC SMT05E Series | 5SXA10 A DC-DC E Class Non-Isolated Other Specifications Characteristic Symbol Switching frequency Fsw Min Typ Max Units Notes and Conditions 330 kHz Fixed frequency Weight 3 g Coplanarity 100 µm Measured from seating plane Max Units Notes and Conditions 100 ºC See Note 5 and individual derating curves Environmental Specifications Characteristic Symbol Thermal performance Min Typ -40 EMC Electromagnetic Compatibility Phenomenon Port Standard Test level Criteria Notes and conditions 6kV contact 8kV air NP As per ETS 300 386-1 table 5 Immunity: Conducted immunity EN61000-4-6 Radiated immunity EN61000-4-3 ESD Enclosure EN61000-4-2 Performance criteria: NP: Normal Performance: EUT shall withstand applied test and operate within relevant limits as specified without damage. RP: Reduced Performance: EUT shall withstand applied test. Reduced performance is permitted within specified limits, resumption to normal performance shall occur at the cessation of the test. LFS: Loss of Function (self recovery): EUT shall withstand applied test without damage, temporary loss of function permitted during test. Unit will self recover to normal performance after test. Referenced ETSI standards: ETS 300 386-1 table 5 (1997): Public telecommunication network equipment, EMC requirements ETS 300 132-2 (1996): Power supply interface at the input to telecommunication equipment: Part 2 operated by direct current (DC) ETR 283 (1997): Transient voltages at interface A on telecommunication direct current (DC) power distributions 4 File Name :lf_smt05e_12.pdf Rev (03): 23 Dec 2005 SMT05E Series | 5 A DC-DC Converters E Class Non-Isolated Safety Agency Approvals Standard Category UL/cUL CSA 22.2 UL60950 TÜV Product Service EN60950 File No. E174104 Certificate No. B 02 12 382 72 035 Material Ratings Characteristic Notes and Conditions Flammability rating UL94V-0 Model Numbers Model Number Input Voltage SMT05E-12W3V3J Output Voltage 10.0 - 14.0VDC 0.8V - 3.63V Output Current (Max.) Typical Efficiency Max. Load Regulation 5A 91% @ full load ±1.0% RoHS Compliance Ordering Information The ‘J’ at the end of the part number indicates that the part is Pb-free (RoHS 6/6 compliant). TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. 5 www.artesyn.com File Name :lf_smt05e_12.pdf Rev (03): 23 Dec 2005 Series Converters | 15W DC/DC SMT05E Series | 5SXA10 A DC-DC E Class Non-Isolated W3V3 Model Input Characteristics Characteristic Symbol Input current - operating Min Typ Max Units Notes and Conditions Iin 1.5 1.6 A DC Vin = Vin (nom); Iout = Iout (max.); Vo = Vo (nom) Reflected ripple current Iin (ripple) 200 mA rms Iout = Iout (max.), measured without external filter Input capacitance internal filter Cinput 9.4 µF Internal to converter Input capacitance external bypass Cbypass 10 µF Recommended customer added capacitance may be required on source impedance on customers applications Characteristic Symbol Min Typ Max Units Notes and Conditions Nominal set-point voltage Vo (nom) 0.785 0.8 0.815 V DC Vin = Vin (nom); Iout = Iout (nom) Total regulation band Vo % For all line, static load and temperature until end of life W3V3 Model Electrical Characteristics - O/P 3 Line regulation 1 % Iout = Iout (nom); Vin (min) to Vin (max) Load regulation 1 % Vin = Vin (nom); Iout (min) to Iout (max) 5 A DC 4 A rms Output current continuous Iout Output current - short circuit Isc 0 2 Continuous, unit auto recovers from short, Vo < 100mV Output voltage - noise 6 Vp-p Vrms 60 25 mV pk-pk Measurement bandwidth: 20MHz. See Application Note mV rms 144 for measurement set-up details File Name :lf_smt05e_12.pdf Rev (03): 23 Dec 2005 SMT05E Series | 5 A DC-DC Converters E Class Non-Isolated W3V3 Model Electrical Characteristics - O/P Characteristic Symbol Load transient response peak deviation Vdynamic Load transient response recovery Trecovery External load capacitance Cext Min Typ Max Units Notes and Conditions 50 mV Peak deviation for 50% to 75% step load, di/dt = 100 mA/µsec. Measurement taken with no external capacitors 50 µsec Settling time to within 1% of output set point voltage for 50% to 75% step load. Measurement taken with no external capacitors 10,000 µF Max Units Notes and Conditions 3.63 V Trim up. Note that the maximum output power is still 16.5W. De-rate the maximum output current accordingly Max Units Notes and Conditions W3V3 Model Protection and Control Features Characteristic Symbol Allowable output voltage Min Typ 0.8 W3V3 Model Efficiency Characteristic Symbol Min Typ Efficiency η 89 90 % Iout = 100% Iout (max), Vin = Vin (nom) Efficiency η 90 91 % Iout = 50% Iout (max), Vin = Vin (nom) 7 www.artesyn.com File Name :lf_smt05e_12.pdf Rev (03): 23 Dec 2005 Series Converters | 15W DC/DC SMT05E Series | 5SXA10 A DC-DC E Class Non-Isolated 93 100 80 60 0 m/s (0 LFM) 1 m/s (200 LFM) 2 m/s (400 LFM) 40 20 91 Vin = 10.0V Vin = 12.0V Vin = 14.0V 89 87 85 0 20 40 60 80 100 AMBIENT TEMPERATURE (ºC) 8 EFFICIENCY (%) RATED OUTPUT POWER (%) W3V3 Model 0 1 2 3 4 5 OUTPUT CURRENT (A) Figure 1: Derating Curve with Vin = 12V and No Trim (Vout = 0.8V) Figure 2: Efficiency vs Load Figure 3: Short Circuit Characteristic (Channel 4: Is/c) Figure 4: Typical Transient Response 50% - 75% Step Load Change (Channel 2: Vo, Channel 4: Io) Figure 5: Typical Transient Response 75% - 50% Step Load Change (Channel 2: Vo, Channel 4: Io) Figure 6: Typical Power-up Characteristic (Channel 1: Vin, Channel 2: Vo) File Name :lf_smt05e_12.pdf Rev (03): 23 Dec 2005 SMT05E Series | 5 A DC-DC Converters E Class Non-Isolated W3V3 Model Figure 7: Control On/Off Characteristic (Channel 1: Vo, Channel 2: Remote ON/OFF) 9 www.artesyn.com Figure 8: Typical Ripple and Noise, Vin = 12V, Vout = 3V3 and Iout = 10A (Channel 2: Vo) File Name :lf_smt05e_12.pdf Rev (03): 23 Dec 2005 Series Converters | 15W DC/DC SMT05E Series | 5SXA10 A DC-DC E Class Non-Isolated 0.190 (4.83) TOP VIEW 0.160 (4.06) 0.160 (4.06) 3 0.340 (8.64) 2 0.350 (8.90) 0.450 (11.43) 4 0.180 (4.57) 1 5 BOTTOM VIEW 0.060 (1.52) 0.800 (20.32) 0.235 (5.97) 0.062 (1.57) SIDE VIEW Seating Plane All dimensions in inches (mm) All tolerance ±0.010in (±0.25mm) unless otherwise stated Connector (5PL) Width :0.090 (2.29) Length: 0.062 (1.57) Pin Connections Pin No. Function 1 2 3 4 5 Remote ON/OFF Vout Trim Ground Vin Figure 9: Mechanical Drawing and Pinout Table 10 File Name :lf_smt05e_12.pdf Rev (03): 23 Dec 2005 SMT05E Series | 5 A DC-DC Converters E Class Non-Isolated Note 1 Thermal reference is defined as the highest temperature measured at any one of the specified thermal reference points. Note 2 The Remote ON/OFF pin is referenced to ground. Note 3 The SMT05E-12 features an ‘Active High’ Remote ON/OFF operation. If not using the Remote ON/OFF pin, leave the pin open (the converter will be on). The Remote ON/OFF pin is referenced to ground. The following conditions apply for the SMT05E: Configuration Remote pin open circuit Remote pin pulled low [Von/off <.8V] Remote pin pulled high [Von/off >1.6V] Converter Operation Unit is ON Unit is OFF Unit is ON An ‘Active Low’ Remote ON/OFF version is also possible with this converter. Please consult the factory for details. Note 4 Thermal reference set up: Unit mounted on an edge card test board 203mm x 190mm. Test board mounted vertically. For test details and recommended set-up see Application Note 144. Note 5 Max 60ºC for full load in still air. See Application Note 144 for a detailed thermal derating. CAUTION: Hazardous internal voltages and high temperatures. Ensure that unit is accessible only to trained personnel. The user must provide the recommended fusing in order to comply with safety approvals. 11 www.artesyn.com File Name :lf_smt05e_12.pdf Rev (03): 23 Dec 2005 SMT05E Series | 5 A DC-DC Converters E Class Non-Isolated NORTH AMERICA e-mail: [email protected] % 800 769 7274 %+ 508 628 5600 EUROPEAN LOCATIONS e-mail: [email protected] IRELAND %+ 353 24 93130 AUSTRIA %+ 43 1 80150 FAR EAST LOCATIONS e-mail: [email protected] HONG KONG %+ 852 2699 2868 Longform Datasheet Artesyn Technologies® 2005 The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. 12 www.artesyn.com File Name :lf_smt05e_12.pdf Rev (03): 23 Dec 2005