T-1 3/4 (5mm) SOLID STATE LAMP PRELIMINARY SPEC Part Number: WP7083PBD/Z BLUE ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description zOUTSTANDING MATERIAL EFFICIENCY. The Blue source color devices are made with InGaN Light zRELIABLE AND RUGGED. Emitting Diode. zI.C. COMPATIBLE. Static electricity and surge damage the LEDS. zRoHS COMPLIANT. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Lead spacing is measured where the leads emerge from the package. 4. Specifications are subject to change without notice. SPEC NO: DSAH1056 REV NO: V.1 DATE: JAN/03/2007 PAGE: 1 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.J.LIU ERP: 1101020223 Selection Guide Dice Part No. WP7083PBD/Z Iv (mcd) [2] @ 20mA Lens Type Blue (InGaN) BLUE DIFFUSED Viewing Angle [1] Min. Typ. 2θ1/2 280 500 60° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity / luminous flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Blue λD [1] Dominant Wavelength Δλ1/2 Typ. Max. Units Test Conditions 458 nm IF=20mA Blue 465 nm IF=20mA Spectral Line Half-width Blue 22 nm IF=20mA C Capacitance Blue 110 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue 3.2 3.7 V IF=20mA IR Reverse Current Blue 10 uA VR= 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Blue Units Power dissipation 111 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA Reverse Voltage 5 V Operating / Storage Temperature -40°C To +85°C Lead Solder Temperature [2] 260°C For 3 Seconds Lead Solder Temperature [3] 260°C For 5 Seconds Notes: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. 2. 2mm below package base. 3. 5mm below package base. SPEC NO: DSAH1056 REV NO: V.1 DATE: JAN/03/2007 PAGE: 2 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.J.LIU ERP: 1101020223 Blue WP7083PBD/Z SPEC NO: DSAH1056 REV NO: V.1 DATE: JAN/03/2007 PAGE: 3 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.J.LIU ERP: 1101020223 PACKING & LABEL SPECIFICATIONS WP7083PBD/Z SPEC NO: DSAH1056 REV NO: V.1 DATE: JAN/03/2007 PAGE: 4 OF 4 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: S.J.LIU ERP: 1101020223