2.0x1.25mm SMD CHIP LED LAMP ATTENTION Part Number: APTC2012PBC/A-F01 BLUE OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description z2.0mmx1.25mm SMT LED,0.75mm THICKNESS. The Blue source color devices are made with InGaN on SiC zLOW POWER CONSUMPTION. Light Emitting Diode. zWIDE VIEWING ANGLE. Static electricity and surge damage the LEDS. zIDEAL FOR BACKLIGHT AND INDICATOR. It is recommended to use a wrist band or anti-electrostatic zVARIOUS COLORS AND LENS TYPES AVAILABLE. glove when handling the LEDs. zPACKAGE : 2000PCS / REEL. All devices, equipment and machinery must be electrically zMOISTURE SENSITIVITY LEVEL : LEVEL 3. grounded. zRoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.1(0.004") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAG5976 REV NO: V.1 DATE: JUN/24/2006 APPROVED: J. Lu CHECKED: Allen Liu DRAWN:Y.L.LI PAGE: 1 OF 5 ERP:1203003788 Selection Guide Dice Part No. APTC2012PBC/A-F01 Iv (mcd) [2] @ 20mA Lens Type BLUE (InGaN) Viewing Angle [1] Min. Typ. 2θ1/2 18 60 120° WATER CLEAR Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous Intensity / Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Blue λD [1] Dominant Wavelength Δλ1/2 Typ. Max. Units Test Conditions 468 nm IF=20mA Blue 470 nm IF=20mA Spectral Line Half-width Blue 21 nm IF=20mA C Capacitance Blue 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Blue 3.3 3.8 V IF=20mA IR Reverse Current Blue 10 uA VR = 5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Blue Units Power dissipation 114 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAG5976 REV NO: V.1 DATE: JUN/24/2006 APPROVED: J. Lu CHECKED: Allen Liu DRAWN:Y.L.LI PAGE: 2 OF 5 ERP:1203003788 Blue APTC2012PBC/A-F01 SPEC NO: DSAG5976 REV NO: V.1 DATE: JUN/24/2006 APPROVED: J. Lu CHECKED: Allen Liu DRAWN:Y.L.LI PAGE: 3 OF 5 ERP:1203003788 APTC2012PBC/A-F01 Recommended Soldering Pattern (Units: mm ; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAG5976 REV NO: V.1 DATE: JUN/24/2006 APPROVED: J. Lu CHECKED: Allen Liu DRAWN:Y.L.LI PAGE: 4 OF 5 ERP:1203003788 PACKING & LABEL SPECIFICATIONS APTC2012PBC/A-F01 SPEC NO: DSAG5976 REV NO: V.1 DATE: JUN/24/2006 APPROVED: J. Lu CHECKED: Allen Liu DRAWN:Y.L.LI PAGE: 5 OF 5 ERP:1203003788