AZ943S 15 AMP MINIATURE PC BOARD RELAY SMT FEATURES • • • • • High performance Low seated height Flux tight version Class B insulation (130°C) standard UL, CUR file E43203 CONTACTS GENERAL DATA Arrangement SPDT (1 Form C) Ratings Form C Max. switched power: 210 W or 2770 VA Max. switched current: 15 A AC, 7 A DC Max. switched voltage: 30 VDC or 300 VAC UL/CUR Ratings Life Expectancy Mechanical Electrical 1 x 106 1 x 105 at 10A 277 VAC Res. Operate Time 10 ms max. Release Time 5 ms max. (with no coil suppression) 1 Form C 10 A at 277 VAC, general use, 100,000 cycles 1/ HP at 125 VAC N.O. 2 125 VA at 120 VAC Pilot Duty, 100k cycles (N.O.) Dielectric Strength 1500 Vrms contact to coil (at sea level for 1 min.) 1000 Vrms across contacts Material Silver tin oxide Insulation Resistance 100 megohms min. at 500 VDC, 50% RH Resistance < 100 milliohms initally (24 V, 1 A method) Dropout Greater than 10% of nominal coil voltage Ambient Temperature COIL Power At Pickup Voltage Max Continuous Dissipation 203 mW 1.8 W at 20°C (68°F) Temperature Rise Temperature At nominal coil voltage Operating -40°C(-40°F) to 70°C(158°F) Storage -40°C(-40°F) to 105°C(221°F) Vibration 0.062" (1.5 mm) DA at 10–55 Hz Shock 10 g 32°C (58°F) at nominal coil voltage Enclosure P.B.T. polyester Max. 130°C (266°F) Terminals Tinned copper alloy, P.C. Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Max. Solvent Temp. 80°C (176°F) 3. Unsealed relays should not be dip cleaned. Max. Immersion Time 30 seconds 4. Specifications subject to change without notice. Weight 10 g NOTES 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. ZETTLER electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 Fax +49 89 800 97 200 [email protected] www.ZETTLERelectronics.com 2003-08-26 AZ943S RELAY ORDERING DATA STANDARD RELAYS COIL SPECIFICATIONS Nominal Coil VDC 5 ORDER NUMBER Must Operate VDC 3.8 Max. Continuous VDC 11.2 Coil Resistance Ohm ±10% 70 AZ943S–1CH–5D 4.5 13.4 100 AZ94S3–1CH–6D 6 9 6.8 20.1 225 AZ943S–1CH–9D 12 9.0 26.8 400 AZ943S–1CH–12D 18 13.5 40.2 900 AZ943S–1CH–18D 24 18.0 53.4 1,600 AZ943S–1CH–24D 48 36.0 107.3 6,400 AZ943S–1CH–48D MECHANICAL DATA Outline Dimensions PC Board Layout .758 MAX [19.25] .606 [15.40] .620 MAX [15.75] .087 [2.20] .059 [1.50] .157 [3.99] .079 [2.00] .043 [1.10] .016 [0.40] .480 [12.19] .472 [12.00] .601 MAX [15.27] 5X.079 [2.00] .236 [6.00] 5X.197 [5.00] .059 [1.50] .472 [12.00] VIEWED TOWARD TERMINALS .758 MAX [19.25] .620 MAX [15.75] Wiring Diagram .472 [12.00] 2 3 5 4 5x.043 [1.10] .008 [0.20] 5x.157 [4.00] .449 [11.40] .059 [1.50] VIEWED TOWARD TERMINALS Dimensions in inches with metric equivalents in parentheses. Tolerance: ± .010" Typical Soldering Profile NOTES 250 The soldering profile to the left is an example and is just to show one of various profiles AZ943S has been tested with. temperature in °C 200 150 TC2 (°C) TC3 (°C) 100 In order to make sure AZ943S fits to a specific profile, we strongly recommend to test under the real environment. 50 0 1 61 121 181 241 301 361 421 time in seconds ZETTLER electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 Fax +49 89 800 97 200 [email protected] www.ZETTLERelectronics.com 2003-08-26