! AZ936 on tin ue d 10 AMP LOW PROFILE POWER RELAY FEATURES • • • • • • • High power switching (2000 VA) High sensitivity, 190 mW pickup Low profile SPST (1 Form A) DC coils up to 100 VDC UL file E44211, CSA file 720514 TÜV file BL991234205002 CONTACTS GENERAL DATA Arrangement SPST (1 Form A) Ratings Resistive load: Max. switched power: 240 W, 2000 VA Max. switched current: 10 A Max. switched voltage: 250 VAC/110 VDC Rated Load UL, CSA 10 A at 125 VAC, resistive 8 A at 250 VAC, 30 VDC, resistive 1/ 10 HP 125 VAC 1/ 10 HP 250 VAC TÜV Material Resistance 10 A at 125 VAC, resistive 8 A at 250 VAC, 30 VDC, resistive Silver tin oxide < 100 milliohms initially (6 V, 1 A voltage drop method) Life Expectancy Mechanical Electrical Minimum operations 1 x 107 1 x 105 at 8 A 250 VAC Res. Operate Time (typical) 10 ms at nominal coil voltage Release Time (typical) 2 ms at nominal coil voltage (with no coil suppression) Dielectric Strength 1500 Vrms coil to contact (at sea level for 1 min.) 1000 Vrms contact to contact Insulation Resistance 1000 megohms min. at 20°C, 500 VDC, 50% RH Dropout Greater than 5% of nominal coil voltage Ambient Temperature Operating At nominal coil voltage -40°C (-40°F) to 70°C (158°F) 3-24 VDC -40°C (-40°F) to 60°C (140°F) 48-100 VDC -40°C (-42°F) to 105°C (221°F) Storage COIL sc Power At Pickup Voltage (typical) 190 mW 3-24 VDC coils 245 mW 48 VDC coil 285 mW 100 VDC coil Max. Continuous Dissipation 0.6 W at 20°C (68°F) Temperature Rise 20°C (36°F) at nominal coil voltage Temperature Max. 115°C (239°F) Di NOTES Vibration 0.062" (1.5 mm) DA at 10–55 Hz Shock 10 g Enclosure P.B.T. polyester Terminals Tinned copper alloy, P.C. Max. Solder Temp. 270°C (518°F) Max. Solder Time 5 seconds Max. Solvent Temp. 80°C (176°F) Max. Immersion Time 30 seconds Weight 5 grams 1. All values at 20°C (68°F). 2. Relay may pull in with less than “Must Operate” value. 3. Specifications subject to change without notice. ZETTLER electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 Fax +49 89 800 97 200 [email protected] www.ZETTLERelectronics.com 2003-06-15 ! AZ936 on tin ue d RELAY ORDERING DATA COIL SPECIFICATIONS SPST-NO (1 Form A) Nominal Coil VDC 3 5 6 9 12 24 48 100 ORDER NUMBER Must Operate VDC 2.4 Max. Continuous VDC 3.9 Coil Resistance ±10% 30 4.0 6.5 83 AZ936–1A–5D AZ936–1A–5DE 4.8 7.8 120 AZ936–1A–6D AZ936–1A–6DE Unsealed Sealed AZ936–1A–3D AZ936–1A–3DE 7.2 11.7 270 AZ936–1A–9D AZ936–1A–9DE 9.6 15.6 480 AZ936–1A–12D AZ936–1A–12DE 19.2 31.2 1,920 AZ936–1A–24D AZ936–1A–24DE 33.6 52.8 4,608 AZ936–1A–48D AZ936–1A–48DE 70.0 110.0 20,000 AZ936–1A–100D AZ936–1A–100DE MECHANICAL DATA PC BOARD LAYOUT .083 [2.1] .866 [22.0] .065 [1.6] .630 [16.0] .700 [17.8] 2xø.035 [ø0.9] 2 .252 [6.4] 1 .500 [12.7] .142 [3.6] .016 [0.4] .500 [12.7] 3 2xø.051 [ø1.3] 2x.020 SQ. [0.8] 3 .400 [10.2] VIEWED TOWARD TERMINALS 1 WIRING DIAGRAM sc 2 4 2x.012 [0.3] 4 2 1 2x.040 [1.0] 3 4 Di VIEWED TOWARD TERMINALS Dimensions in inches with metric equivalents in parentheses. Tolerance: ±0.010" ZETTLER electronics GmbH Junkersstrasse 3, D-82178 Puchheim, Germany Tel. +49 89 800 97 0 Fax +49 89 800 97 200 [email protected] www.ZETTLERelectronics.com 2003-06-15