3.5x2.8 mm SMD CHIP LED LAMP PRELIMINARY SPEC Part Number: AA3528VGC/A GREEN ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Description Features SINGLE COLOR. The Green source color devices are made with InGaN on SUITABLE FOR ALL SMT ASSEMBLY AND SOLDER G-SiC Light Emitting Diode. PROCESS. Static electricity and surge damage the LEDS. AVAILABLE ON TAPE AND REEL. It is recommended to use a wrist band or IDEAL FOR BACKLIGHTING. anti-electrostatic glove when handling the LEDs. PACKAGE : 1500PCS / REEL. All devices, equipment and machinery must be electrically MOISTURE SENSITIVITY LEVEL : LEVEL 4. grounded. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3.Specifications are subject to change without notice. SPEC NO: DSAG5312 REV NO: V.1 DATE: JUN/07/2006 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP: 1201001865 Selection Guide Part No. Dice AA3528VGC/A Iv (mcd) [2] @ 20mA Lens Type GREEN (InGaN) WATER CLEAR Viewing Angle [1] Min. Typ. 2θ θ1/2 110 220 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous Intensity/ Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Green λD [1] Dominant Wavelength ∆λ1/2 Typ. Max. Units Test Conditions 520 nm IF=20mA Green 525 nm IF=20mA Spectral Line Half-width Green 35 nm IF=20mA C Capacitance Green 100 pF VF=0V;f=1MHz VF [2] Forward Voltage Green 3.2 4.0 V IF=20mA IR Reverse Current Green 10 uA VR = 5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Green Units Power dissipation 200 mW DC Forward Current 50 mA Peak Forward Current [1] 100 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAG5312 REV NO: V.1 DATE: JUN/07/2006 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP: 1201001865 Green AA3528VGC/A SPEC NO: DSAG5312 REV NO: V.1 DATE: JUN/07/2006 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP: 1201001865 AA3528VGC/A Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAG5312 REV NO: V.1 DATE: JUN/07/2006 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP: 1201001865 PACKING & LABEL SPECIFICATIONS AA3528VGC/A SPEC NO: DSAG5312 REV NO: V.1 DATE: JUN/07/2006 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.W.WANG ERP: 1201001865