3.0mmx3.0mm SURFACE MOUNT LED LAMP PRELIMINARY SPEC Part Number: APKF3030VGAXXC-F01 GREEN ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description ●LOW POWER CONSUMPTION. The Green source color devices are made with InGaN on ●3.0mmx3.0mm SMT LED, 2.0mm(MAX.) THICKNESS. G-SiC Light Emitting Diode. ●ONE GREEN CHIPS IN ONE PACKAGE. Static electricity and surge damage the LEDS. ●CAN PRODUCE ANY COLOR IN VISIBLE It is recommended to use a wrist band or anti-electrostatic SPECTRUM, INCLUDING WHITE LIGHT. glove when handling the LEDs. ●PACKAGE : 1000PCS / REEL. All devices, equipment and machinery must be electrically ●MOISTURE SENSITIVITY LEVEL : LEVEL 4. grounded. ●RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3.Specifications are subject to change without notice. SPEC NO: DSAG5764 REV NO: V.3 DATE: JUN/28/2006 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1204000839 Selection Guide Dice Part No. APKF3030VGAXXC-F01 Iv (mcd) [2] @ 20mA Lens Type GREEN (InGaN) WATER CLEAR Viewing Angle [1] Min. Typ. 2 θ 1/2 110 250 100° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous Intensity/ Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Units Test Conditions λpeak Peak Wavelength Green Device Typ. 520 Max. nm IF=20mA λD[1] Dominant Wavelength Green 525 nm IF=20mA Δλ1/2 Spectral Line Half-width Green 35 nm IF=20mA C Capacitance Green 100 pF VF=0V;f=1MHz VF[2] Forward Voltage Green 3.2 4.0 V IF=20mA IR Reverse Current Green 10 uA VR = 5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Green Units Power dissipation 120 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAG5764 REV NO: V.3 DATE: JUN/28/2006 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1204000839 Green APKF3030VGAXXC-F01 SPEC NO: DSAG5764 REV NO: V.3 DATE: JUN/28/2006 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1204000839 APKF3030VGAXXC-F01 Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAG5764 REV NO: V.3 DATE: JUN/28/2006 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1204000839 PACKING & LABEL SPECIFICATIONS APKF3030VGAXXC-F01 SPEC NO: DSAG5764 REV NO: V.3 DATE: JUN/28/2006 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Z.Z.YANG ERP: 1204000839