3.5x2.0mm SMD CHIP LED LAMP PRELIMINARY SPEC Part Number: APK3520VGC/A-F01 GREEN ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features Description 3.5mmX2.0mm SMT LED, 1.3mm THICKNESS. The Green source color devices are made with InGaN on LOW POWER CONSUMPTION. G-SiC Light Emitting Diode. WIDE VIEWING ANGLE. Static electricity and surge damage the LEDS. IDEAL FOR BACKLIGHT AND INDICATOR. It is recommended to use a wrist band or anti-electrostatic VARIOUS COLORS AND LENS TYPES AVAILABLE. glove when handling the LEDs. PACKAGE : 2000PCS / REEL. All devices, equipment and machinery must be electrically MOISTURE SENSITIVITY LEVEL : LEVEL 4. grounded. RoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.2(0.008") unless otherwise noted. 3. Specifications are subject to change without notice. SPEC NO: DSAG5758 REV NO: V.1 DATE: JUN/19/2006 PAGE: 1 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI ERP:1204000837 Selection Guide Dice Part No. APK3520VGC/A-F01 Iv (mcd) [2] @ 20mA Lens Type GREEN (InGaN) WATER CLEAR Viewing Angle [1] Min. Typ. 2 θ 1/2 70 180 120° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous Intensity/ Luminous Flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Green λD[1] Dominant Wavelength ∆λ1/2 C Typ. Max. Units Test Conditions 520 nm IF=20mA Green 525 nm IF=20mA Spectral Line Half-width Green 35 nm IF=20mA Capacitance Green 100 pF VF=0V;f=1MHz VF[2] Forward Voltage Green 3.2 4.0 V IF=20mA IR Reverse Current Green 10 uA VR = 5V Notes: 1. Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Green Units Power dissipation 120 mW DC Forward Current 30 mA Peak Forward Current [1] 100 mA 5 V Reverse Voltage Operating/Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAG5758 REV NO: V.1 DATE: JUN/19/2006 PAGE: 2 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI ERP:1204000837 Green APK3520VGC/A-F01 SPEC NO: DSAG5758 REV NO: V.1 DATE: JUN/19/2006 PAGE: 3 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI ERP:1204000837 APK3520VGC/A-F01 Recommended Soldering Pattern (Units : mm;Tolerance:± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAG5758 REV NO: V.1 DATE: JUN/19/2006 PAGE: 4 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI ERP:1204000837 PACKING & LABEL SPECIFICATIONS APK3520VGC/A-F01 SPEC NO: DSAG5758 REV NO: V.1 DATE: JUN/19/2006 PAGE: 5 OF 5 APPROVED: J. Lu CHECKED: Allen Liu DRAWN: Y.L.LI ERP:1204000837