4.0x4.0mm RIGHT ANGLE SURFACE MOUNT LED LAMP PRELIMINARY SPEC Part Number: AA4040ZGC GREEN ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Features zSINGLE Description COLOR. zSUITABLE The Green source color devices are made with AlInGaN on FOR ALL SMT ASSEMBLY AND SOLDER PROCESS. zAVAILABLE zIDEAL Sapphire Light Emitting Diode. Static electricity and surge damage the LEDS. ON TAPE AND REEL. FOR BACKLIGHTING. It is recommended to use a wrist band or anti-electrostatic glove when handling the LEDs. zPACKAGE : 500PCS / REEL. All devices, equipment and machinery must be electrically zMOISTURE SENSITIVITY LEVEL : LEVEL 4. grounded. zRoHS COMPLIANT. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is ±0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. 4.The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH1840 REV NO: V.2 DATE: MAR/15/2007 PAGE: 1 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP:1201002289 Selection Guide Dice Part No. AA4040ZGC Iv (mcd) [2] @ 20mA Lens Type GREEN (AlInGaN) WATER CLEAR Viewing Angle [1] Min. Typ. 2θ1/2 480 800 90° Notes: 1. θ1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2. Luminous intensity / luminous flux: +/-15%. Electrical / Optical Characteristics at TA=25°C Symbol Parameter Device λpeak Peak Wavelength Green λD [1] Dominant Wavelength Δλ1/2 Typ. Max. Units Test Conditions 515 nm IF=20mA Green 525 nm IF=20mA Spectral Line Half-width Green 30 nm IF=20mA C Capacitance Green 45 pF VF=0V;f=1MHz VF [2] Forward Voltage Green 3.3 4.1 V IF=20mA IR Reverse Current Green 10 uA VR = 5V Notes: 1.Wavelength: +/-1nm. 2. Forward Voltage: +/-0.1V. Absolute Maximum Ratings at TA=25°C Parameter Green Units Power dissipation 102.5 mW DC Forward Current 25 mA Peak Forward Current [1] 150 mA 5 V Reverse Voltage Operating / Storage Temperature -40°C To +85°C Note: 1. 1/10 Duty Cycle, 0.1ms Pulse Width. SPEC NO: DSAH1840 REV NO: V.2 DATE: MAR/15/2007 PAGE: 2 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP:1201002289 Green AA4040ZGC SPEC NO: DSAH1840 REV NO: V.2 DATE: MAR/15/2007 PAGE: 3 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP:1201002289 AA4040ZGC Recommended Soldering Pattern (Units : mm; Tolerance: ± 0.1) Tape Specifications (Units : mm) SPEC NO: DSAH1840 REV NO: V.2 DATE: MAR/15/2007 PAGE: 4 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP:1201002289 PACKING & LABEL SPECIFICATIONS AA4040ZGC SPEC NO: DSAH1840 REV NO: V.2 DATE: MAR/15/2007 PAGE: 5 OF 5 APPROVED: WYNEC CHECKED: Allen Liu DRAWN: S.J.LIU ERP:1201002289