TRACOPOWER TEN30

DC/DC Converters
TEN 30WIN Series, 30 Watt
Features
◆ Smallest encapsulated 30 W converter
◆ 2” x 1” x 0.4” shielded metal package
◆ Ultra wide 4:1 input voltage range
◆ Single- dual- and triple output models
◆ Very high efficiency up to 91%
◆ Operating temp. range –40 °C to +75 °C
◆ I/O isolation 1500 VDC
◆ Over temperature and
short circuit protection
◆ Remote On/Off
◆ Adjustable output voltage
◆ 3-year product warranty
pending
The TEN 30WIN series is a family of high performance 30W dc-dc converter
modules featuring ultra wide 4:1 input voltage ranges in a compact low profile case
with industry-standard footprint. Standard features include remote On/Off, output
voltage trimming, over voltage protection, under voltage lockout, over temperature
and short circuit protection.
Typical applications for these products are battery operated equipment and
distributed power architectures in communication and industrial electronics, everywhere where isolated, tightly regulated voltages are required and space is limited
on the PCB.
Models
Order code
TEN 30-2407WIN
TEN 30-2409WIN
TEN 30-2410WIN
TEN 30-2411WIN
TEN 30-2412WIN
TEN 30-2413WIN
TEN 30-2421WIN
TEN 30-2422WIN
TEN 30-2423WIN
TEN 30-2433WIN
TEN 30-2434WIN
TEN 30-2431WIN
TEN 30-2432WIN
TEN 30-4807WIN
TEN 30-4809WIN
TEN 30-4810WIN
TEN 30-4811WIN
TEN 30-4812WIN
TEN 30-4813WIN
TEN 30-4821WIN
TEN 30-4822WIN
TEN 30-4823WIN
TEN 30-4833WIN
TEN 30-4834WIN
TEN 30-4831WIN
TEN 30-4832WIN
Input voltage range
9 – 36 VDC
(24 VDC nominal)
18 – 75 VDC
(48 VDC nominal)
http://www.tracopower.com
Output 1
1.5 VDC / 8.5 A
2.5 VDC / 8.0 A
3.3 VDC / 7.5 A
5.1 VDC / 6.0 A
12 VDC / 2.5 A
15 VDC / 2.0 A
+ 5 VDC / 3.0 A
+12 VDC / 1.25 A
+15 VDC / 1.0 A
3.3 VDC / 5.0 A
3.3 VDC / 5.0 A
5 VDC / 4.0 A
5 VDC / 4.0 A
1.5 VDC / 8.5 A
2.5 VDC / 8.0 A
3.3 VDC / 7.5 A
5.1 VDC / 6.0 A
12 VDC / 2.5 A
15 VDC / 2.0 A
+ 5 VDC / 3.0 A
+12 VDC / 1.25 A
+15 VDC / 1.0 A
3.3 VDC / 5.0 A
3.3 VDC / 5.0 A
5 VDC / 4.0 A
5 VDC / 4.0 A
Output 2
Output 3
–5 VDC / 3.0 A
–12 VDC / 1.25 A
–15 VDC / 1.0 A
+12 VDC / 0.42 A
+15 VDC / 0.33 A
+12 VDC / 0.42 A
+15 VDC / 0.33 A
–12 VDC / 0.42 A
–15 VDC / 0.33 A
–12 VDC / 0.42 A
–15 VDC / 0.33 A
–5 VDC / 3.0 A
–12 VDC / 1.25 A
–15 VDC / 1.0 A
+12 VDC / 0.42 A
+15 VDC / 0.33 A
+12 VDC / 0.42 A
+15 VDC / 0.33 A
–12 VDC / 0.42 A
–15 VDC / 0.33 A
–12 VDC / 0.42 A
–15 VDC / 0.33 A
Efficiency
typ.
80 %
83 %
86 %
88 %
89 %
89 %
88 %
87 %
87 %
86 %
86 %
88 %
88 %
80 %
84 %
86 %
88 %
90 %
91 %
88 %
88 %
88 %
86 %
86 %
88 %
88 %
Page 1 of 4
DC/DC Converters
TEN 30WIN
30 Watt
Input Specifications
Input current at no load
(nominal input)
12 & 15 VDC / ±12 & ±15 VDC models, 24
other models, 24
±12 & ±15 V models, 48
other models, 48
V:
V:
V:
V: 30 mA typ.
100 mA typ.
15 mA typ.
55 mA typ.
Input current at full load
(nominal input)
1.5 VDC model, 24
2.5 VDC model, 24
3.3 VDC model, 24
other models, 24
1.5 VDC model, 48
2.5. VDC model, 48
3.3 VDC model, 48
other models, 48
V:
V:
V:
V:
V:
V: V:
V:
700 mA typ.
1050 mA typ.
1250 mA typ.
1500 mA typ.
350 mA typ.
520 mA typ.
630 mA typ.
750 mA typ.)
Start-up voltage / under voltage lockout
24 V models: 9 VDC / 8 VDC (typ.)
48 V models: 18 VDC / 16 VDC (typ.)
Surge voltage (100 msec. max.)
24 V models: 50 VDC max.
48 V models: 100 VDC max
Conducted noise (input) EN 55022 class A with input capacitor
24 V models: 4.7 µF / 50 V 1812 MLCC
48 V models: 2.2 µF / 100 V 1812 MLCC)
Output Specifications
Voltage set accuracy ±1 % (±5 % for auxilary outputs)
Output voltage adjustment (only for single output models) ±10 % with external resistor (see page 3)
Regulation
– Input variation single- and dual output models:
triple output models:
– Load variation single output models:
dual output models balanced load:
dual output models unbalanced load:
triple output models (main/auxiliary):
0.2 % max.
1 % / 5 % max. (main / auxilary)
0.5 % max. (0 – 100 %)
1 % max. (0 – 100 %)
5 % max. (25 / 100 %)
1 % max. / 5 % max. (10 – 100 %)
Minimum load single- and dual output models:
triple output models:
not required
10% of rated max current (operation at lower load
condition will not damage the converters. However,
they may not meet all listed specifications)
Temperature coefficient ±0.02 %/K max.
Ripple and noise (20 MHz Bandwidth)
1.5 V – 5.1 VDC models: 100 mVpk-pk. typ.
triple output models: 50 / 75 mVpk-pk typ. (main / auxilary)
other models: 150 mVpk-pk typ.
Start up time (nominal Vin and constant resistive load) 30 ms typ.
Transient response time (25% load change) 250 µs typ.
Short circuit protection indefinite (automatic recovery)
Over load protection 150% of Iout max. typ.
Thermal shutdown @ 115 °C typ.
Over voltage protection
Capacitive load output models 1.5
2.5
3.3
5.1
12
15
VDC
VDC
VDC
VDC
VDC
VDC
models:
models:
models:
models:
models:
models:
1.5 – 3.3 VDC models: 5.1 VDC models:
12 & 15 VDC models: ±5 VDC models:
other dual output models:
3.3 VDC triple output models:
5.1 VDC triple output models:
2.0 V
3.3 V
3.9 V
6.2 V
15 V
18 V
20’000 µF max.
14’000 µF max.
2’000 µF max.
±3’000 µF max.
±1’300 µF max.
15’000 / ±220 µF max. (main / auxilary)
8’000 / ±220 µF max. (main / auxilary)
All specifications valid at nominal input voltage, full load and +25°C after warm-up time unless otherwise stated.
http://www.tracopower.com
Page 2 of 4
DC/DC Converters
TEN 30WIN
30 Watt
General Specifications
Temperature ranges
– Operating –40 °C to +75 °C
– Case temperature +105 °C max.
– Storage –55 °C to +125 °C
Derating 3.5 %/K above 60 °C
Humidity (non condensing) 95 % rel. H max.
Thermal inpedance
– Natural convection 12 °C/W
– Natural convection with heat sink 10 °C/W
Reliability, calculated MTBF
(MIL-HDBK-217F, @ 25°C, ground benign)
single- and dual output models: 435’000 h
triple output models: 320’000 h
Isolation voltage (60 sec) – Input / Output 1500 VDC
Isolation resistance – Input / Output >1000 M Ohm
Isolation capacity
– Input / Output 1500 pF max.
Remote On/Off
– On: 3.0 to 12 VDC or open circuit.
– Off: 0 to 1.2 VDC or short circuit pin 3 and pin 2
– Off idle current: 3 mA max.
Switching frequency (pulse width modulation PWM) single- and dual output models: 430 kHz typ.
triple output models: 400 kHz typ.
Vibration and thermal shock MIL-STD-810E
Safety standards UL 60950-1, EN 60950-1, IEC 60950-1
Safety approvals UL /cUL file pending
Output Voltage Adjustment (for single output models only)
Trim up
Trim down
Trim
+Vout
Rd
Ru
Trim
- Vout
Nominal output voltage at open Trim input!
Ru [kohm]
output
+5% +10% Rd [kohm]
1.5 2.5 3.3V 5.1V 12V
0.56 4.3 6.8 5.1
43
0.051 0.33 0.75 0.75 4.3
15V
47
1.8
output
–5% –10% 1.5 2.5 3.3V 5.1V 12V
0.68 6.2 8.2 6.2 56
0.062 0.75 0.62 0.82 5.6
15V
56
2.2
Physical Specifications
Case material copper, nickel plated
Baseplate material none conductive FR4
Potting material epoxy (UL 94V-0 -rated)
Weight 31 g (1.1 oz)
Soldering temperature max. 265 °C / 10 sec.
http://www.tracopower.com
Page 3 of 4
DC/DC Converters
TEN 30WIN
30 Watt
Outline Dimensions
Single- and dual
output models
Triple output
models
15.24
12.7
(0.6)
5.08
(0.2)
(0.2)
2.54
(0.1)
2.5 (0.1)
50.8 (2.0)
45.72 (1.8)
3
5.6
(0.22)
2 1
5
3
4
(0.4)
20.32
2 1
Bottom View
10.16
10.2
7.62
(0.3)
Bottom View
6
Pin-Out
(0.5)
5.08
(0.4)
7
6
5 4
Pin
Single
Dual
Triple
1
+Vin (Vcc)
+Vin (Vcc)
+Vin (Vcc)
2
–Vin (GND)
–Vin (GND)
–Vin (GND)
3
Remote On/Off
Remote On/Off
Remote On/Off
4
Output 1
Output 1
Output 2
5
Common
Common
Output 3
6
Trim
Output 2
Common
7
No pin
No pin
Output 1
5.08
Dimensions in [mm], () = Inch
Pin diameter: 1.0 ±0.05 (0.04 ±0.002)
Pin pitch tolerances: ±0.35 (±0.014)
Case tolerances: ±0.5 (±0.02)
(0.2)
(0.8)
Heat-Sink (Option)
Order code: TEN-HS1
(cont.: heat-sink, thermal pad, 2 clamps)
Material:
Aluminum
Finish: Anodic treatment (black)
Weight: 17g (0.60oz) without converter
Thermal impedance after assembling: 10 K/W
56.0 (2.2) max.
Heat-sink
Thermal pad
Clamp
Converter
16.8 (0.66)
max.
14.5 (0.57)
Note:
The product label on converter has to be removed before mounting the heat-sink.
For volume orders converters will be supplied
with heat-sinks already mounted. Please contact factory for quotation.
Separate heat-sinks are only available for
prototypes and small quantity orders.
Specifications can be changed any time without notice.
Rev. 07/08.1
Jenatschstrasse 1 · CH-8002 Zurich · Switzerland
Tel. +41 43 311 45 11 · Fax +41 43 311 45 45 · [email protected] · www.tracopower.com
Page 4 of 4