SSR1008M, SSR1008Z SSR1009M, SSR1009Z SSR1010M, SSR1010Z Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com 10 AMPS 80 - 100 VOLTS SCHOTTKY RECTIFIER Designer’s Data Sheet Part Number/Ordering Information 1/ SSR1008 __ __ __ SSR1009 __ __ __ SSR1010 __ __ __ │ │ │ │ │ │ │ └ │ └ Screening 2/ __ = Not Screened │ TX = TX Level │ TXV = TXV │ S = S Level │ └ Lead Options __ = Straight Leads, D = Bent Down, U = Bent Up Package M = TO-254, Z = TO-254Z TO-254 TO-254Z FEATURES: • • • • • • • Extremely Low Forward Voltage Drop Low Reverse Leakage Current Hermetically Sealed Package Guard Ring for Overvoltage Protection Eutectic Die Attach 175°C Operating Junction Temperature TX, TXV, or Space Level Screening Available MAXIMUM RATINGS RATING SYMBOL VALUE UNIT Peak Repetitive Reverse Voltage and DC Blocking Voltage SSR1008M, SSR1008Z SSR1009M, SSR1009Z SSR1010M, SSR1010Z VRRM VRWM VR 80 90 100 Volts IO 10 Amps IFSM 200 Amps TOP & TSTG -65 to +175 RθJC 1.7 3/ Average Rectified Output Current (Resistive Load, 60Hz, Sine Wave, TA=25°C) 3/ Peak Surge Current (8.3 ms Pulse, Half Sine Wave, superimposed on IO, allow junction to reach equilibrium between pulses, TA=25°C) Operating and Storage Temperature Maximum Thermal Resistance Junction to Case NOTES: 1/ 2/ 3/ ° C 3/ ° C/W For ordering information, price, and availability- Contact Factory. Screened to MIL-PRF-19500. For optimal performance, connect leads 2 & 3 together. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RS0205K DOC SSR1008M, SSR1008Z SSR1009M, SSR1009Z SSR1010M, SSR1010Z Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com ELECTRICAL CHARACTERISTICS (Per Leg) CHARACTERISTICS Instantaneous Forward Voltage Drop (IF = 1 Adc, TA = 25°C, Pulse) (IF = 5 Adc, TA = 25°C, Pulse) (IF = 10 Adc, TA = 25°C, Pulse) Instantaneous Forward Voltage Drop TA = 100°C (IF = 10 Adc, Pulse) TA = -55°C Reverse Leakage Current (Rated VR, TA = 25°C, Pulse) Reverse Leakage Current (Rated VR, TA = 100°C, Pulse) Junction Capacitance (VR = 10 Vdc, TA = 25°C, f = 1 MHz) Case Outlines- TO-254 and TO-254Z SYMBOL MAXIMUM UNIT VF1 VF2 VF3 0.57 0.72 0.8 Vdc VF4 VF5 0.70 0.90 Vdc IR1 100 µA IR2 5 mA CJ 400 pF PIN OUT: Rectifier Configuration 4/ PIN 1- CATHODE PIN 2- ANODE PIN 3- ANODE TO-254 (M Suffix) Optional Bent Down Leads (MD & ZD Suffix) TO-254Z (Z Suffix) Optional with Bent Up Leads (MU & ZU Suffix) For information on curves, contact the Factory Representative for Engineering Assistance. NOTES: 4/ Pins 2 and 3 must be externally connected for best performance. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RS0205K DOC