SSDI SSR1505CTM

Solid State Devices, Inc.
14701 Firestone Blvd * La Mirada, CA 90638
Phone: (562) 404-4474 * Fax: (562) 404-1773
[email protected] * www.ssdi-power.com
Designer’s Data Sheet
Part Number / Ordering Information1/
SSR1505CTM thru SSR1507CTM
and
SSR1505CTJ thru SSR1507CTJ
15 AMP
CENTERTAP SCHOTTKY RECTIFIER
50 - 70 VOLTS
SSR15 __ __ __ __
│ │ │ └ Screening2/ __ = Not Screened
│ │ │
TX = TX Level
TXV = TXV Level
│ │ │
S = S Level
│ │ │
│ │ └ Package
M = TO-254
│ │
J = TO-257
│ │
│ │
│ └ Configuration
CT = Centertap
│
└ Voltage
05 = 50 V
06 = 60 V
07 = 70 V
FEATURES:
 Extremely low forward voltage drop
 Low reverse leakage
 Hermetically sealed custom surface mount
package
 Guard ring for overvoltage protection
 Eutectic die attach
 175ºC operating junction temperature
 TX, TXV, and S level screening available consult factory
MAXIMUM RATINGS3/
Peak Repetitive Reverse and
DC Blocking Voltage
SSR1505CT
SSR1506CT
SSR1507CT
Average Rectified Forward Current
(Resistive load, 60 Hz, sine wave, TA = 25ºC)4/
Peak Surge Current
(8.3 ms pulse, half sine wave superimposed on IO, allow junction to reach
equilibrium between pulses, TA = 25ºC)
Operating & Storage Temperature
Maximum Thermal Resistance
(Junction to Case)4/
TO-254
TO-257
NOTES:
1/
2/
3/
4/
Symbol
Value
Units
VRRM
VRWM
VR
50
60
70
Volts
IO
15
Amps
IFSM
100
Amps
TOP & Tstg
-65 to +175
RθJC
2.2
2.2
TO-254 (M)
o
o
C
C/W
TO-257 (J)
For ordering information, price, and availability - contact factory.
Screening based on MIL-PRF-19500. Screening flows available on request.
Unless otherwise specified, all electrical characteristics @25ºC.
Both legs together.
NOTE: All specifications are subject to change without notification.
SCD's for these devices should be reviewed by SSDI prior to release.
DATA SHEET #: SH0055A
DOC
Solid State Devices, Inc.
14701 Firestone Blvd * La Mirada, CA 90638
Phone: (562) 404-4474 * Fax: (562) 404-1773
[email protected] * www.ssdi-power.com
SSR1505CTM thru SSR1507CTM
and
SSR1505CTJ thru SSR1507CTJ
ELECTRICAL CHARACTERISTICS (per leg)3/
Symbol
Min
Typ
Max
VF1
VF2
VF3
VF4
VF5
VF6
VF7
VF8
VF9
––
––
––
––
––
––
––
––
––
0.38
0.51
0.62
0.46
0.54
0.61
0.26
0.45
0.53
0.43
0.58
0.70
0.50
0.62
––
0.35
0.53
––
VDC
Reverse Leakage Current
(Rated VR, TA = 25ºC, 300sec pulse minimum)
IR1
––
25
100
A
Reverse Leakage Current
(Rated VR, TA = 100ºC, 300sec pulse minimum)
IR2
––
4
––
mA
Reverse Leakage Current
(Rated VR, TA = 125ºC, 300sec pulse minimum)
IR3
––
15
25
mA
Junction Capacitance
(VR = 10V, f = 1MHz, TA = 25ºC)
CJ
––
––
300
pF
Instantaneous Forward Voltage Drop
(TA=25ºC, 300sec pulse)
Instantaneous Forward Voltage Drop
(TA=-55ºC, 300sec pulse)
Instantaneous Forward Voltage Drop
(TA=125ºC, 300sec pulse)
IF = 1 A
IF = 5 A
IF = 10 A
IF = 1 A
IF = 5 A
IF = 10 A
IF = 1 A
IF = 5 A
IF = 10 A
Units
VDC
VDC
Package Outline: TO-254
PIN OUT:
PIN 1: ANODE 1
PIN 2: ANODE 2
TAB: CATHODE
Note: For optimal performance, connect
anode terminals together.
Package Outline: TO-257
PIN OUT:
PIN 1: ANODE 1
PIN 2: ANODE 2
TAB: CATHODE
Note: For optimal performance, connect
anode terminals together.
NOTE: All specifications are subject to change without notification.
SCD's for these devices should be reviewed by SSDI prior to release.
DATA SHEET #: SH0055A
DOC