05125 ET724 STEERING DIODE ARRAY APPLICATIONS ✔ Ethernet - 10/100/1000 Base T ✔ Cellular Phones ✔ Set Top Box Interface ✔ Sensor Interface ✔ Handheld Electronics ✔ FireWire ✔ USB Interface IEC COMPATIBILITY (EN61000-4) SOT-23-6 ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns ✔ 61000-4-5 (Surge): 12A, 8/20µs - Level 1(Line-Gnd) & Level 2(Line-Line) FEATURES ✔ ✔ ✔ ✔ ✔ ✔ ESD Protection > 40 kilovolts Low Clamping Voltage Provides Four(4) Lines of Protection Low Leakage Current < 100nA Low Capacitance: 3pF Typical RoHS Compliant MECHANICAL CHARACTERISTICS ✔ ✔ ✔ ✔ Molded JEDEC SOT-23-6 Package Weight 16 milligrams (Approximate) Available in Lead-Free Pure-Tin Plating(Annealed) Solder Reflow Temperature: Pure-Tin - Sn, 100: 260-270°C ✔ Consult Factory for Leaded Device Availability ✔ Flammability Rating UL 94V-0 ✔ 8mm Tape and Reel Per EIA Standard 481 ✔ Marking: Marking Code & Pin One Defined By DOT on Package PIN CONFIGURATION 05125.R8 2/07 I/O 1 1 6 I/O 4 VN 2 5 VP I/O 2 3 4 I/O 3 1 www.protekdevices.com ET724 DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified SYMBOL VALUE UNITS TA -55 to 150 °C Storage Temperature TSTG -55 to 150 °C Continuous Power Dissipation PPC 125 mW PARAMETER Operating Temperature ELECTRICAL CHARACTERISTICS PER LINE PART NUMBER ET724 DEVICE MARKING 724 REPETITIVE PEAK REVERSE VOLTAGE (See Note 1) TYPICAL FORWARD VOLTAGE @ 25°C Unless Otherwise Specified MAXIMUM PEAK PULSE FORWARD CURRENT VRRM VOLTS 8/20µs @1A VF VOLTS 8/20µs IFM AMPS MAXIMUM REVERSE LEAKAGE CURRENT (See Note 2) @VRRM IR nA 20 2 12 10 MAXIMUM QUIESCENT SUPPLY CURRENT (See Note 3) @20V IRQ nA TYPICAL CAPACITANCE 100 3 @0V, 1MHz Cj pF Note 1: VRRM is +VCC for pin 5, -VEE for pin 2. Pin 2 also represents ground for unidirectional applications. Note 2: +20V from pin 5 to 1, 5 to 4, 5 to 3, and 5 to 6. -20V from pin 2 to 1, 2 to 3, 2 to 4, and 2 to 6. Note 3: +20V from pin 5 to 2. FIGURE 1 NON-REPETITIVE PEAK PULSE CURRENT CAPABILITY 120 IPP - Peak Pulse Current - % of IPP Peak Pulse Current - Amps 8 6 4 2 0 0.001 05125.R8 2/07 FIGURE 2 PULSE WAVE FORM tf 100 TEST WAVEFORM PARAMETERS tf = 8µs td = 20µs Peak Value IPP 80 e-t 60 40 td = t I /2 PP 20 0 0.01 0.1 1 Square Wave Pulse - ms 10 100 2 0 5 10 15 t - Time - µs 20 25 30 www.protekdevices.com ET724 GRAPHS Forward Current - mA 200 160 FIGURE 3 TYPICAL LOW CURRENT FORWARD VOLTAGE DROP TA = 25°C SINGLE PULSE See Figure 2 120 80 40 0 600 5 Forward Current - A 4 800 1,000 Forward Voltage Drop - mV 1,200 FIGURE 4 TYPICAL HIGH CURRENT FORWARD VOLTAGE DROP TA = 25°C SINGLE PULSE See Figure 2 3 2 1 0 0 05125.R8 2/07 1 2 Forward Voltage Drop - V 3 3 www.protekdevices.com ET724 SOT-23-6 PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE D SOT-23-6 E 6 5 4 3 2 PACKAGE DIMENSIONS 0° - 8° K 1 DIM L J B F A B C D E F G J K L M M A G C MOUNTING PAD 3.05 1.75 1.30 0.50 1.05 2.10 1.45 0.20 3.00 0.20 TYP 0.55 0.110 0.059 0.036 0.014 0.033 0.067 0.036 0.003 0.102 0.007 TYP 0.014 0.120 0.070 0.051 0.020 0.040 0.083 0.057 0.008 0.118 0.007 TYP 0.022 1. Dimensioning and tolerances per ANSI Y14.5M, 1985. 2. Controlling Dimension: Inches 3. Dimensions are exclusive of mold flash and metal burrs. DIM Millimeters Inches 0.70 1.90 0.95 2.40 1.00 2.80 1.50 0.90 0.35 0.85 1.70 0.90 0.09 2.60 0.20 TYP 0.35 NOTES 4 TYPICAL 1 2 3 4 5 INCHES MIN MAX MILLIMETERS MIN MAX 0.028 0.074 0.037 0.094 0.039 TAPE & REEL/BULK ORDERING NOMENCLATURE 3 1. Surface mount product is taped and reeled in accordance with EIA-481. 2. Suffix -T7 = 7 Inch Reel - 3,000 pieces per 8mm tape, i.e., ET724-T7 3. Suffix - LF = Lead-Free, Pure-Tin Plating, i.e., ET724-LF-T7. 2 1 5 Outline & Dimensions: Rev 2 - 10/05, 06013 Tape & Reel Specifications (Dimensions in millimeters) Reel Dia. Tape Width 178mm (7”) 8mm A0 B0 K0 D E F W P0 P2 P 3.20 ± 0.10 3.20 ± 0.10 1.65 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ±0.30 4.00 ±0.10 2.00 ±0.05 4.00 ±0.10 P0 t P2 D tmax 0.25 10 Pitches Cumulative Tolerance on Tape. ± 0.2 E Pin 1 Indicated by Dot Top cover tape A0 F W K0 B0 P User Direction of Feed COPYRIGHT © ProTek Devices 2007 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. 05125.R8 2/07 4 ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: [email protected] Web Site: www.protekdevices.com www.protekdevices.com