05140 USB004 Only One Name Means ProTek’Tion™ STEERING DIODE ARRAY APPLICATIONS ✔ USB Interface Ports ✔ Cellular Phones ✔ Video ✔ Handheld Electronics ✔ Personal Computers IEC COMPATIBILITY (EN61000-4) ✔ 61000-4-2 (ESD): Air - 15kV, Contact - 8kV ✔ 61000-4-4 (EFT): 40A - 5/50ns SOT-143 FEATURES ✔ ESD Protection > 40 kilovolts ✔ 225 Milliwatt Continuous Power Dissipation ✔ Provides Two (2) Lines of Protection ✔ LOW LEAKAGE CURRENT < 1.0µA ✔ ULTRA LOW CAPACITANCE: 3pF Typical MECHANICAL CHARACTERISTICS ✔ Molded JEDEC SO-143 ✔ Weight 35 milligrams (Approximate) ✔ Flammability rating UL 94V-0 ✔ 8mm Tape and Reel Per EIA Standard 481 ✔ Marking: Marking Code PIN CONFIGURATION 05140.R4 8/03 VN 1 4 VP I/O 1 2 3 I/O 2 1 www.protekdevices.com USB004 DEVICE CHARACTERISTICS MAXIMUM RATINGS @ 25°C Unless Otherwise Specified SYMBOL VALUE UNITS TJ -55°C to 150°C °C Storage Temperature TSTG -55°C to 150°C °C Continuous Power Dissipation PPC 225 mW Repetitive Peak Forward Current @ tp=5µs, F=50kHz (Pin 2 - 3) IFRM 700 mA PARAMETER Operating Temperature ELECTRICAL CHARACTERISTICS PER LINE @ 25°C Unless Otherwise Specified PART NUMBER DEVICE MARKING CODE USB004 REPETITIVE PEAK REVERSE VOLTAGE (See Note 1) @ 10µA V RRM VOLTS MAXIMUM REVERSE LEAKAGE CURRENT (See Note 2) VRRM @ 5V IR µA MAXIMUM DIODE FORWARD VOLTAGE MAXIMUM CAPACITANCE (See Note 3 ) (Between Line and Ground) @ 20mA VF VOLTS Cj pF 20 1 0.95 6 PSA Note 1: VP - VN = 20V. Note 2: VP - VN = 5.5V. Note 3: VP = 5V, f = 1MHz, VI/O = 2.5V, VN = 0V 110 IF - Forward Current - mA IF - Forward Current - A 10 FIGURE 1 PEAK FORWARD CURRENT VS FORWARD VOLTAGE 8 6 4 2 1 05140.R4 8/03 2 3 4 5 6 7 8 90 70 50 30 10 800 1000 0 0 10 FIGURE 2 LOW FORWARD CURRENT VS FORWARD VOLTAGE 9 VF - Forward Voltage - V 2 840 880 920 960 VF - Forward Voltage - mV www.protekdevices.com USB004 PACKAGE OUTLINE & DIMENSIONS PACKAGE OUTLINE SOT-143 A L G B J S PACKAGE DIMENSIONS DIM K F A B C D F G H J K L R S D H C R MOUNTING PAD TYPICAL Inches 1 2 3 4 5 6 7 8 9 10 11 0.112 0.079 0.071 0.075 0.041 0.108 0.047 0.031 0.033 0.033 0.033 2.85 2.00 1.80 1.90 1.05 2.75 1.20 0.80 0.85 0.85 0.85 6 5 3 11 8 0.0120 0.055 0.045 0.020 0.037 0.080 0.004 0.006 0.024 0.024 0.033 0.098 1. Surface mount product is taped and reeled in accordance with EIA-481. 2. Suffix-T7 = 7 Inch Reel - 3,000 pieces per 8mm tape, i.e., USB004-T7. 3. Suffix-T13 = 13 Inch Reel - 10,000 pieces per 8mm tape, i.e., USB004-T13. 9 Outline & Dimensions: Rev 1 - 11/01, 06011 COPYRIGHT © ProTek Devices 2003 SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice (except JEDEC). ProTek Devices 2929 South Fair Lane, Tempe, AZ 85282 Tel: 602-431-8101 Fax: 602-431-2288 E-Mail: [email protected] Web Site: www.protekdevices.com DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice, and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance, ProTek assumes no responsibility with respect to the selection or specifications of such products. 05140.R4 8/03 0.110 0.047 0.033 0.015 0.031 0.070 0.0005 0.003 0.018 0.0175 0.028 0.083 TAPE & REEL ORDERING NOMENCLATURE 10 7 3.04 1.39 1.14 0.50 0.93 2.03 0.10 0.15 0.60 0.60 0.83 2.48 1. Dimensioning and tolerances per ANSI Y14.5M, 1985. 2. Controlling Dimension: Inches 3. Dimensions are exclusive of mold flash and metal burrs. 2 4 2.80 1.20 0.84 0.39 0.79 1.78 0.013 0.08 0.46 0.445 0.72 2.11 INCHES MIN MAX NOTES 1 DIM Millimeters MILLIMETERS MIN MAX 3 www.protekdevices.com