STA3KA13.6JE thru STA3KA800JE PRELIMINARY SOLID STATE DEVICES, INC. 14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 Designer's Data Sheet FEATURES: 13.6 - 800 Volts Unidirectional in TO-257 Package Glass Passivated Junction, Epoxy Encapsulated Assembly Meets all Environmental Requirements of Mil-RPF-19500 Custom Configuration Available Reverse Polarity Available (Add Suffix "R") 150oC Maximum Operating Temperature TX and TXV Level Screening Available 3,000 WATTS PEAK PULSE POWER 13.6 - 800 VOLTS UNIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSOR TO-257JE APPLICATIONS: Voltage Sensitive Components Protection Protection against Power Interruption Lightning Protection Maximum Ratings Stand off Voltage SYMBOL VALUE UNITS VRWM 13.6-800 Volts Steady State Power Dissipation PD 10 W Peak Pulse Power @ 1.0 msec PPP 3,000 W Peak Surge Current (8.3 ms Pulse, Half Sine Wave) IFSM 200 A Top, Tstg -65 to +175 Operating and Storage Temperature PACKAGE OUTLINE: TO-257JE C o Note: SSDI's Transient Voltage Suppressors offer standard Breakdown Voltage Tolerances of "10%(A) and "5%(B). For other Voltages and Voltage Tolerances, contact SSDI's Marketing Department. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: TVS001B STA3KA13.6JE thru STA3KA800JE PRELIMINARY SOLID STATE DEVICES, INC. 14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 Electrical Characteristics BREAK DOWN (note 1) PART NUMBER Nominal Test Voltage Current V BR IBRT MAX REVERSE STAND OFF Reverse Voltage Leakage Current VRWM IR @VRWM PEAK PULSE CLAMPING @ Current Voltage tp = 1ms (max) (note 2) MAXIMUM TEMPERATURE COEFFICIENT IPP VC TC @25oC 5% Volts mA 10% 5% :A A Volts %/ oC STA3KA13.6JE STA3KA15JE STA3KA16.4JE STA3KA18.2JE STA3KA20JE STA3KB13.6JE STA3KB15JE STA3KB16.4JE STA3KB18.2JE STA3KB20JE 13.6 15 16.4 18.2 20 10 10 10 1.0 1.0 11.00 12.10 13.26 14.74 16.2 10.60 12.80 14.04 15.56 17.1 1000 500 200 50 10 143 132 124 112 103 21.0 22.6 24.2 26.8 29.0 0.057 0.061 0.065 0.068 0.073 STA3KA22JE STA3KA24JE STA3KA26JE STA3KA30JE STA3KA32JE STA3KB22JE STA3KB24JE STA3KB26JE STA3KB30JE STA3KB32JE 22 24 26 30 32 1.0 1.0 1.0 1.0 1.0 17.84 19.44 21.0 24.2 25.8 18.8 20.4 22.2 25.6 27.2 5.0 5.0 5.0 5.0 5.0 96.0 90.0 82.0 71.0 67.0 31.2 33.4 36.4 42.4 45.0 0.075 0.076 0.081 0.084 0.086 STA3KA36JE STA3KA40JE STA3KA44JE STA3KA48JE STA3KA60JE STA3KB36JE STA3KB40JE STA3KB44JE STA3KB48JE STA3KB60JE 36 40 44 48 60 1.0 1.0 1.0 1.0 1.0 29.0 32.4 35.6 38.8 48.6 30.6 34.2 37.6 41.0 50.2 5.0 5.0 5.0 5.0 5.0 57.2 54.0 49.0 45.0 36.0 52.4 55.4 61.2 66.4 82.8 0.088 0.090 0.092 0.094 0.097 STA3KA72JE STA3KA86JE STA3KA102JE STA3KA124JE STA3KA150JE STA3KB72JE STA3KB86JE STA3KB102JE STA3KB124JE STA3KB150JE 72 86 102 124 150 1.0 1.0 1.0 1.0 1.0 59.2 61.6 69.6 73.6 82.6 87.2 100.4 106.0 120.4 128.2 5.0 5.0 5.0 5.0 5.0 30.0 25.3 21.4 17.7 14.6 98.8 118.6 140.2 170.0 206.0 0.099 0.101 0.102 0.104 0.105 STA3KA164JE STA3KA200JE STA3KA300JE STA3KA360JE STA3KA400JE STA3KB164JE STA3KB200JE STA3KB300JE STA3KB360JE STA3KB400JE 164 200 300 360 400 1.0 1.0 1.0 1.0 1.0 132.8 140.2 162 171 242 256 292 308 324 342 5.0 5.0 5.0 5.0 5.0 13.3 11.0 7.2 6.1 5.5 226 274 414 492 548 0.105 0.106 0.108 0.108 0.108 STA3KA600JE STA3KB600JE STA3KA800JE STA3KB800JE 600 800 1.0 1.0 5.0 5.0 3.6 2.7 828 1096 0.110 0.110 % PEAK VALUE 10% 100 90 80 70 60 50 40 30 20 10 0 486 648 tp 0 1 2 TIME (ms) 3 4 512 684 Notes: 1. All voltages are measured with automated test set using 35 msec test time. Longer or shorter test times will have a corresponding effect on the measured value due to the heating effects. 2. Pulse width (tP) is defined as the time from peak pulse current IPP to the point where peak pulse current decayed to 50% of rated IPP. (10:sec x 100:sec wave form as defined by R.E.A.) 3. All Ratings based on 25oC Case temperature.