STA3KA13.6JE thru STA3KA800JE Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com 3,000 WATT PEAK PULSE POWER UNIDIRECTIONAL TRANSIENT VOLTAGE SUPPRESSOR DESIGNER’S DATA SHEET Part Number / Ordering Information 1/ STA3K __ __ __ __ │ │ │ └ Screening 2/ __ = Not Screened TX = TX Level │ │ │ TXV = TXV Level │ │ │ │ │ │ │ └ Package │ JE = TO-257JE │ │ └ Voltage │ 13.6 – 800 Volts │ └ Voltage Tolerance 3/ A = 10% B = 5% 13.6 – 800 VOLTS FEATURES: 13.6 – 800 volts unidirectional in TO-257 package Glass passivated junction, epoxy encapsulated assembly Meets all environmental requirements of MIL-PRF-19500 Custom configuration available Reverse polarity available (add suffix “R”) 150°C maximum operating temperature TX and TXV level screening available APPLICATIONS: Voltage sensitive components protection Protection against power interruption Lightning protection MAXIMUM RATINGS Symbol Value Units VRWM 13.6 - 800 Volts Steady State Power Dissipation PD 10 Watts Peak Pulse Power @ 1.0 msec PPP 3000 Watts Peak Surge Current (8.3 ms pulse, half sine wave) IFSM 200 Amps Top & Tstg -65 to +150 °C Stand Off Voltage Operating and Storage Temperature NOTES: 1/ For ordering information, price, and availability – contact factory. 2/ Screening based on MIL-PRF-19500. Screening flows available on request. 3/ SSDI’s Transient Voltage Suppressors offer standard breakdown voltage tolerances of ±10% (A) and ±5% (B). For other voltages and voltage tolerances, contact SSDI’s Marketing Department. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: TVS001D TO-257JE DOC STA3KA13.6JE thru STA3KA800JE Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, Ca 90638 Phone: (562) 404-4474 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com ELECTRICAL CHARACTERISTICS 4/ MAX REVERSE STAND OFF BREAKDOWN PART NUMBER 10% STA3KA13.6JE STA3KA15JE STA3KA16.4JE STA3KA18.2JE STA3KA20JE STA3KA22JE STA3KA24JE STA3KA26JE STA3KA30JE STA3KA32JE STA3KA36JE STA3KA40JE STA3KA44JE STA3KA48JE STA3KA60JE STA3KA72JE STA3KA86JE STA3KA102JE STA3KA124JE STA3KA150JE STA3KA164JE STA3KA200JE STA3KA300JE STA3KA360JE STA3KA400JE STA3KA600JE STA3KA800JE 3/ 5% STA3KB13.6JE STA3KB15JE STA3KB16.4JE STA3KB18.2JE STA3KB20JE STA3KB22JE STA3KB24JE STA3KB26JE STA3KB30JE STA3KB32JE STA3KB36JE STA3KB40JE STA3KB44JE STA3KB48JE STA3KB60JE STA3KB72JE STA3KB86JE STA3KB102JE STA3KB124JE STA3KB150JE STA3KB164JE STA3KB200JE STA3KB300JE STA3KB360JE STA3KB400JE STA3KB600JE STAKB800JE PEAK PULSE CLAMPING Nominal Voltage Test Current Voltage Reverse Leakage Current VBR IBRT VRWM IR@VRWM IPP VC Volts 13.6 15 16.4 18.2 20 22 24 26 30 32 36 40 44 48 60 72 86 102 124 150 164 200 300 360 400 600 800 mA 10 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 µA 1000 500 200 50 10 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 A 143 132 124 112 103 96.0 90.0 82.0 71.0 67.0 57.2 54.0 49.0 45.0 36.0 30.0 25.3 21.4 17.7 14.6 13.3 11.0 7.2 6.1 5.5 3.6 2.7 Volts 21.0 22.6 24.2 26.8 29.0 31.2 33.4 36.4 42.4 45.0 52.4 55.4 61.2 66.4 82.8 98.8 118.6 140.2 170.0 206.0 226 274 414 492 548 828 1096 10% 11.00 12.10 13.26 14.74 16.2 17.84 19.44 21.0 24.2 25.8 29.0 32.4 35.6 38.8 48.6 59.2 69.2 82.6 100.4 120.4 132.8 162 242 292 324 486 648 5% 10.60 12.80 14.04 15.56 17.1 18.8 20.4 22.2 25.6 27.2 30.6 34.2 37.6 41.0 50.2 61.6 73.6 87.2 106.0 128.2 140.2 171 256 308 342 512 684 @ Current 5/ tp = 1ms Voltage (max) MAXIMUM TEMPERATURE COEFFICIENT TC @ 25°C & 125°C %/°C 0.057 0.061 0.065 0.068 0.073 0.075 0.076 0.081 0.084 0.086 0.088 0.090 0.092 0.094 0.097 0.099 0.101 0.102 0.104 0.105 0.105 0.106 0.108 0.108 0.108 0.110 0.110 CASE OUTLINE: TO-257JE NOTES: 3/ SSDI’s Transient Voltage Suppressors offer standard breakdown voltage tolerances of ±10% (A) and ±5% (B). For other voltages and voltage tolerances, contact SSDI’s Marketing Department. 4/ All voltages are measured with automated test set using 35 msec test time. Longer or shorter test times will have a corresponding effect on the measured value due to the heating effects. 5/ Pulse width (tP) is defined as the time from peak pulse current IPP to the point where peak pulse current decayed to 50% of rated IPP (10µsec x 100µsec wave form as defined by R.E.A.). NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: TVS001D DOC