SSDI SDA195

SOLID STATE DEVICES INC.
14830 Valley View, La Mirada, Ca 90631
SDA195
Solid State Devices, Inc.
14830 Valley View Blvd * La Mirada, Ca 90638
Phone: (562) 404-7855 * Fax: (562) 404-1773
[email protected] * www.ssdi-power.com
DESIGNER’S DATA SHEET
30A / 100V
THREE PHASE BRIDGE
RECTIFIER ASSEMBLY
Part Number / Ordering Information 1/
SDA195 __ __
⎢ ⎣ Lead Bend 3/ __ = Straight Leads
UB = Up Bend
⎢
DB = Down Bend
⎢
⎢
⎣ Terminals 2/ 3/ L = Copper Leads
_ = Turret Terminals
Features:
•
•
•
•
•
•
•
Higher Blocking Voltage available. Contact Factory
Average Output Current 30 Amps
Low Reverse Leakage Current
Constructed with Void-free, Hermetically Sealed Discretes
Aluminum Case for Maximum Thermal Conductivity
Small Package Size (1.500 x 0.870 x 0.30 Max”)
TX and TXV & S Level Screening Available
• Fast, Ultra Fast, & Hyper Fast versions available.
Contact Factory
Maximum Ratings
Symbol
VRRM
VRSM
VR
Peak Repetitive and Peak Surge Reverse Voltage
Average Rectified Forward Current 4/
(Resistive Load, 60 hz Sine Wave, TC = 55°C)
Peak Surge Current
(8.3 ms Pulse, Half Sine Wave, TA = 25 °C, per leg)
Operating & Storage Temperature
Maximum Thermal Resistance Junction to Case
SDA195 ( L )
NOTE: All specifications are subject to change without notification.
SCD's for these devices should be reviewed by SSDI prior to release.
Value
100
Units
Volts
Io
30
Amps
IFSM
200
Amps
Top & Tstg
-55 to +150
ºC
RΘJC
2.3
ºC/W
SDA195 (_)
DATA SHEET #: RA0043B
DOC
SOLID STATE DEVICES INC.
14830 Valley View, La Mirada, Ca 90631
SDA195 Series
Solid State Devices, Inc.
14830 Valley View Blvd * La Mirada, Ca 90638
Phone: (562) 404-7855 * Fax: (562) 404-1773
[email protected] * www.ssdi-power.com
Electrical Characteristic 5/
Symbol
Min
Typ
Max
Units
VF1
––
––
1.05
VDC
Reverse Leakage Current
(Rated VR, TA = 25ºC, 300 µsec pulse minimum)
IR1
––
––
25
µA
Reverse Leakage Current
(Rated VR, TA = 100ºC, 300 µsec pulse minimum)
IR2
––
––
500
µA
Instantaneous Forward Voltage Drop
(TA = 25°C, 300 - 500 µsec pulse)
IF = 15A
NOTES:
*
1/
2/
3/
4/
5/
Pulse Test: Pulse Width = 300µsec, Duty Cycle = 2%
For Ordering Information, Price, and Availability Contact Factory.
For Package Outlines Contact Factory.
Up and Down Bend Configurations are Available for ‘__’ ( Leaded ) Packages Only.
Derate Linearly at 0.28A/ºC for TC > 55ºC.
Unless Otherwise Specified, All Electrical Characteristics @25ºC.
Mounting Diagram: 2/
Tolerances:
(Unless Otherwise Specified)
.XX: ±0.02”
.XXX: ±0.005”
NOTE: All specifications are subject to change without notification.
SCD's for these devices should be reviewed by SSDI prior to release.
DATA SHEET #: RA0043B
DOC