SDR6W series Solid State Devices, Inc. 14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com DESIGNER’S DATA SHEET 6A 5 µsec 1400 to 1800 V Standard Recovery Rectifier Part Number / Ordering Information 1/ SDR6 __ __ __ │ │ │ │ │ │ │ │ │ │ └ │ └ Screening __ = Not Screened │ TX = TX Level TXV = TXV │ S = S Level │ │ └ Package ___ = Axial w/ .050" lead diameter A = Axial w/ .040" lead diameter SMS = Surface Mount Square Tab Voltage R = 1400 V T = 1600 V W = 1800 V Features: • • • • • • • • Maximum Ratings Symbol Value Units VRRM 1400 1600 1800 Volts TL @ 1/8" = 25 °C max TTAB = 55 °C max Io 6 Amps TL @ 1/8" = 25 °C max TTAB = 55 °C max IFSM 75 Amps TOP & TSTG -65 to +175 ºC RθJL 12 8 ºC/W SDR6R SDR6T SDR6W Peak Repetitive Reverse Voltage Average Rectified Forward Current (Resistive Load, 60 Hz Sine Wave) Peak Surge Current 2/ (8.3 ms Pulse, Half Sine Wave) Standard Recovery: 5 usec Maximum High Surge Rating: 75 Amps @ 8.3 mS and 500A @ 100 µS Low Reverse Leakage Current: 5 µA Low Junction Capacitance: 40 pF Low Thermal Resistance: 8 - 12 ºC/W Single Chip Construction Available in Fast and Ultra Fast Speeds. Consult Factory. TX, TXV, and S Level Screening iaw MILPRF-19500 Available Operating & Storage Temperature Maximum Total Thermal Resistance Axial NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. Axial @ 1/8 " SMS Surface Mount Square Tab (SMS) DATA SHEET #: RC0094A DOC SDR6W series Solid State Devices, Inc. 14830 Valley View Blvd * La Mirada, Ca 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Electrical Characteristics Instantaneous Forward Voltage Drop (IF = 6A, 300 – 500 µsec Pulse) Reverse Leakage Current (100% of rated VR, 300 µs pulse min.) Reverse Recovery Time (IF = 0.5A, IR = 1A, IRR = 0.25A, TA = 25ºC) Junction Capacitance (VR = 10VDC, TA = 25ºC, f = 1MHz) Symbol Min TA = 25ºC TA = -55ºC TA = 25ºC TA = 100ºC VF1 –– IR1 IR2 –– TA = 25ºC tRR TA = 25ºC CJ VF2 Typ Max Units 1.10 1.20 1.0 10 1.16 1.30 5.0 50 –– 1.5 5 µsec –– 22 40 pF VDC µA NOTES: 1/ For Ordering Information, Price, and Availability Contact Factory. 2/ Surge rated at 500A maximum, pulse width = 100 µsec. Available Part Numbers: SDR6W SDR6T SDR6R SDR6WA SDR6TA SDR6RA Case Outline: (Axial) Case Outline: (SMS) SDR6WSMS SDR6TSMS SDR6RSMS DIM MIN MAX A B C (std) C (A outline) D –– 0.135” 0.047” 0.037” 1.00” 0.168” 0.156” 0.053” 0.043” –– DIM MIN MAX A B C D 0.173” 0.180” 0.022” 0.002” 0.177” 0.210” 0.028” –– Note: Dimensions prior to soldering. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0094A DOC