SDR620-28 THRU SDR622-28 Solid State Devices, Inc. 14701Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com DESIGNER’S DATA SHEET 20 AMP 100-200 Volts 35nsec Hyper Fast Rectifier Features: • Replaces 1N5816 Devices • Hyper Fast Recovery: 35nsec Maximum • High Surge Rating • Low Reverse Leakage Current • Low Junction Capacitance • Hermetically Sealed Surface Mount Power Package • Gold Eutectic Die Attach Available • Ultrasonic Aluminum Wire Bonds • TX, TXV, and Space Level Screening Available. 28 PIN CLCC Maximum Ratings Peak Repetitive Reverse and DC Blocking Voltage 1/ Average Rectified Forward Current (Resistive Load, 60 Hz Sine Wave, TA = 25ºC) Peak Surge Current (8.3 ms Pulse, Half Sine Wave, TA = 25ºC) 2/ Operating & Storage Temperature Maximum Thermal Resistance Junction to Case, 2/ Symbol SDR620-28 SDR621-28 SDR622-28 Value Units 100 150 200 Volts Io 20 Amps IFSM 100 Amps Top & Tstg -65 to +200 ºC RθJL 6.6 ºC/W VRRM VRWM VR 1/ Higher Voltage class available 2/ Package Limited NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RH0069B DOC SDR620-28 THRU SDR622-28 Solid State Devices, Inc. 14701 Firestone Blvd * La Mirada, CA 90638 Phone: (562) 404-7855 * Fax: (562) 404-1773 [email protected] * www.ssdi-power.com Electrical Characteristics Symbol Min Max Units VF1 –– 1.1 1.3 Volts VF2 –– 1.0 1.2 Volts IR1 –– 10 µA IR2 –– 1 mA CJ –– 225 pF trr –– 35 nsec Instantaneous Forward Voltage Drop (IF=10Adc, TA = 25ºC, 300 µsec pulse) 1/ (IF=20Adc, TA = 25ºC, 300 µsec pulse) 1/ Instantaneous Forward Voltage Drop (IF= 10Adc, TA = 100ºC, 300 µsec pulse) 1/ (IF= 10Adc, TA = -55ºC, 300 µsec pulse) 1/ Reverse Leakage Current (Rated VR, TA = 25ºC, 300 µsec pulse minimum) Reverse Leakage Current (Rated VR, TA = 100ºC, 300 µsec pulse minimum) Junction Capacitance (VR = 10 Vdc, TA = 25ºC, f = 1MHz) Reverse Recovery Time (IF = 0.5A, IR = 1A, IRR = 0.25A, TA = 25ºC ) CASE OUTLINE: 28 PIN LCC Pin 1, 15-28: Anode Pin 5-11: Cathode .040 x 45° CHAM Pin 2, 3, 13, 14: N/C 3 PLACES .450±.008 SQ. .010±.001 .300 .035 PIN 1 .050 TYP .010 TYP .030 TYP PIN 1 .020 x 45° CHAM .095 MAX. 28x .030 .300 1/ For best results connect pins 1, 15-28 together and pins 5-11 together in operation. NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RH0069B DOC