PSSBU150 Series 3-pin Input Connector 150 Watt Single Output AC/DC Open Frame Power Supply for I.T.E. FEATURES ● 2 Year Warranty ● Class I Insulation ● Internal EMI Filter ● 3-pin Input Connector ● Power Factor Correction ● Synchronous Rectification ● Power Fail Detect (Optional) ● Over Voltage Protection (Crowbar Design) ● Input Surge Current and Over Load Protection ● Output Voltage Available from 9VDC thru 48VDC ● 2-pin Input Connector Available (See PSSBU151 Series) SPECIFICATIONS: PSSBU150 Series All specifications are based on 25oC, Nominal Input Voltage, and Maximum Output Current unless otherwise noted. We reserve the right to change specifications based on technological advances. SPECIFICATION TEST CONDITIONS Min Nom Max INPUT (Vin) Operating Voltage Range Input Frequency Input Current (Low Line) Input Current (High Line) Inrush Current (Low Line) Inrush Current (High Line) Safety Ground Leakage Current Start-Up Time OUTPUT (Vo) Output Voltage Range Load Regulation Line Regulation Output Power Output Current Range Ripple & Noise (peak to peak) Transient Response Hold-Up Time PROTECTION Over Voltage Protection Over Current Protection GENERAL Efficiency Dielectric Withstanding Voltage For Primary to Secondary Dielectric Withstanding Voltage For Primary to Ground Isolation Resistance Power Factor Correction ENVIRONMENTAL Operating Temperature Storage Temperature Relative Humidity Temperature Coefficient PHYSICAL Weight Dimensions Warranty SAFETY EMI Requirements for CISPR-22 EMI Requirements for FCC PART-15 90 47 Io = Full Load, Vin = 115VAC Io = Full Load, Vin = 230VAC Io = Full Load, 25°C, Cool Start, Vin = 115VAC Io = Full Load, 25°C, Cool Start, Vin = 230VAC Io = Full Load, Vin = 240VAC Io = Full Load, Vin = 100VAC 0.3 16 56 0.5 1 264 63 2.0 0.8 20 63 0.75 2 See Rating Chart 3 5 0.5 1 150 See Rating Chart 0.5 1 4 Vin = 230VAC Io = Full Load Vin = 90 to 264VAC Full Load, Vin = 90VAC Io = Full Load to Half Load, Vin = 100VAC Io = Full Load, Vin = 110VAC 16 112 110 Io = Full Load, Vin = 230VAC 85 88 Unit VAC Hz A A A A mA s % % W % ms ms 132 150 % % 90 % Primary to Secondary 4242 VDC Primary to Ground 2121 VDC Test Voltage = 500VDC Io = Full Load, Vin = 90~260VAC 50 0.95 Derate linearly from 100% Load at 50°C to 50% load at 70°C 0 -40 5 -0.04 All Outputs MΩ 0.97 1.0 +70 +85 95 +0.04 °C °C % %/°C Approximately 390 grams 127(L) x 76.2(W) x 35.56(H) mm 2 Years Vin = 220VAC Vin = 110VAC Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 B B Class Class PSSBU150 Series 3-pin Input Connector 150 Watt Single Output AC/DC Open Frame Power Supply for I.T.E. OUTPUT VOLTAGE / CURRENT RATING CHART Model Number PSSBU150-104 PSSBU150-105 PSSBU150-106 PSSBU150-107 PSSBU150-108 PSSBU150-109 PSSBU150-110 PSSBU150-111 Preset Voltage 9 VDC 12 VDC 15 VDC 18 VDC 24 VDC 30 VDC 36 VDC 48 VDC Output Current 16.0 A 12.5 A 10.0 A 8.33 A 6.25 A 5.00 A 4.17 A 3.13 A Total Regulation 5% 5% 5% 4% 3% 2% 2% 2% Maximum Output Power 144 W 150 W 150 W 150 W 150 W 150 W 150 W 150 W NOTES 1. 2. 3. 4. 5. Mechanical Drawing: Dimensions are shown in inches or mm. Weight of the unit is approximately 390 grams. Input connector mates with Molex housing 09-50-3051 and Molex 2478 series crimp terminal. Output connector mates with Molex housing 09-50-3131 and Molex 2478 series crimp terminal. 2 pin input connector available: See PSSBU151 Series. MECHANICAL DRAWING NOTES: 1. Dimensions are shown in inches and mm. 2. Weight: Approximately 390 grams. 3. Input connector mates with Molex housing 09-50-3051 and Molex 2478 series crimp terminal. 4. Output connector mates with Molex housing 09-50-3131 and Molex 2478 series crimp terminal. PIN 1 2 3 4 5 6 7 8 9 10 11 12 PSSBU150-1XX OUT OUT OUT OUT OUT OUT RTN RTN RTN RTN RTN RTN Wall Industries, Inc. 5 Watson Brook Road Exeter, NH 03833 603-778-2300 www.wallindustries.com Fax 603-778-9797 13 (Optional) RTN