SBU100 SERIES 100W Open Frame Switching Power Supplies For I.T.E. Description: The SBU100 series of compact, open frame constructed, AC/DC switching mode power supplies provide 100 Watts of continuous output power .They are suited for use in based systems, portable equipments and many other applications. All models meet FCC Part-15 class B and CISPR-22 class B emission Limits and are designed to comply with UL/c-UL(UL 60950-1:2ndEdition),TUV/Bauart(EN 60950-1:2ndEdition) and new CE requirements. All units are 100% burned in and tested. Features: Wide Operating Voltage 90 to 260 VAC,47 to 63 Hz Internal EMI filter Single Output Input connector mates with Molex housing 09-50-3051 and Molex 2478 series crimp terminal Output connector mates with Molex housing 09-50-3131 and Molex 2478 series crimp terminal Input Surge Current, Over Voltage and Over Load protection Over Voltage Protection (Crowbar Design) Active Power Factor Correction Size: 3"x5"x1.18" Class I 2 year warranty Safety Approvals : BAUART GEPRUFT Product Safety CB TYPE APPROVED Electrical Characteristics: Sym. Vin fin * Parameter Test Conditions Min. Typ. Max. Unit Safety Approvals Input Voltage Range 100 240 VAC Operate Voltage Range 90 260 VAC Input Frequency 47 63 Hz PF Power Factor Correction Io=Full load, Vin=90~260VAC Po Output Power Range Vin=90 to 260 VAC Vo Output Voltage Range See rating Chart V Io Output Current Range See rating Chart A 0.95 0.97 1.0 100 0 W Iil Input Current (Low Line) Io=Full load, Vin=115VAC 1.6 Iih Input Current (High Line) 0.8 A A I rl Low Line Inrush Current I rh High Line Inrush Current Eff Efficiency Io=Full load, Io=Full load, Vin=115VAC Io=Full load, Vin=230VAC Io=Full load, Vin=230VAC 25 C,Cool start, 44 50 A 25 C,Cool start, 88 100 A 80 85 % REG-i Line Regulation Io=Full load REG -o Load Regulation 0.5 1 % 3 5 % OVP Over Voltage Protection 112 132 % OCP Over Current Protection 110 150 % Ttr Time of Transient Response Io=Full load to Half Load, Vin=100VAC 4 mS Vin=230VAC 70 Vin=230VAC Thold Hold-Up Time Io=Full load, Vin=110VAC Ts Start Up Time Io=Full load, Vin=100VAC mS 16 2 Vp-p Ripple & Noise (Peak to Peak) Full load, Vin=90VAC 0.5 Ilk Safety Ground Leakage Current Io=Full load, Vin=240VAC 0.5 0.75 TC Temperature All output Coefficient -0.04 1 S % mA 0.04 %/ C Min. Typ. Max. Unit 50 C C % % Hrs * Environmental : Note: The Ripple & Noise which is under 3.3VDC at 2% max Sym. Toper Tstg Ho Hr MTBF Pd Parameter T e s t Conditions Operating Temperature Storage Temperature Operating Humidity Storage Humidity Operating Temperature at 25 C, Calculated per MIL-HDBK-217F Derate linearly from 100% load at 50 C to 50% load at 70 C 0 -40 0 0 0.1M 70 85 95 75 SBU100 SERIES 100W Open Frame Switching Power Supplies For I.T.E. Safety Specifications: Sym. Vps Vpg Ris Parameter CISPR EMI requirements for CISPR-22 FCC Min. Typ. Max. Unit Primary to secondary 4242 VDC Primary to ground 2121 VDC T e s t Conditions Dielectric Withstanding Voltage for Primary to secondary Dielectric Withstanding Voltage for Primary to Ground Isolation Resistance EMI requirements for FCC PART-15 M Test Voltage=500VDC 50 Vin=220VAC B CLASS Vin=110VAC B CLASS Output Voltage And Current Rating Chart (Single Output) : Model Number Output Voltage Output Current Total Regulation Maximum Output Power SBU100-101 3 ~ 5 VDC 18.00 ~ 10.80 A 5% 54W SBU100-102 5 ~ 6 VDC 14.00 ~ 11.66 A 5% 70W SBU100-103 6 ~ 9 VDC 13.33 ~ 8.88 A 5% 80W SBU100-104 9 ~ 11 VDC 11.11 ~ 9.09 A 5% 100W SBU100-105 11 ~ 13 VDC 9.09 ~ 7.69 A 3% 100W SBU100-106 13 ~ 16 VDC 7.69 ~ 6.25 A 3% 100W SBU100-107 16 ~ 21 VDC 6.25 ~ 4.76 A 3% 100W SBU100-108 21 ~ 27 VDC 4.76 ~ 3.70 A 2% 100W SBU100-109 27 ~ 33 VDC 3.70 ~ 3.03 A 2% 100W SBU100-110 33 ~ 40 VDC 3.03 ~ 2.50 A 2% 100W SBU100-111 40 ~ 50 VDC 2.50 ~ 2.00 A 2% 100W PIN CHART PIN MODEL 1 2 3 4 5 6 7 8 9 10 11 12 13 SBU100-1XX-13PIN OUT OUT OUT OUT OUT OUT RTN RTN RTN RTN RTN RTN N/C Mechanical Specifications : Note: 1. Dimensions are shown in inches or mm. 2. Weight: 345gs approx. 3. Input connector mates with Molex housing 09-50-3051 and Molex 2478 series crimp terminal. 4. Output connector mates with Molex housing 09-50-3131 and Molex 2478 series crimp terminal.